/autoaccept¶
Syntax¶
/autoaccept [option] [setting]
Description¶
Controls, displays status, and configures MQ2AutoAccept
Options¶
| Option | Description |
|---|---|
(no option) |
Lists command syntax |
on|off |
Main accept toggle. Nothing else will accept if this is off. |
translocate on|off |
Toggle acceptance of translocate or zephyr port. Default OFF |
anchor on|off |
Toggle acceptance of primary/secondary real estate anchor port. OFF |
selfanchor on|off |
Toggle acceptance of primary/secondary real estate anchor port when you cast it. Default OFF |
trade on|off |
Toggle acceptance of trades by people on the auto accept list. Default ON |
trade always on|off |
Toggles always accept all trades. Default OFF |
trade reject on|off |
Reject trades for people not on auto accept list after 5 seconds. Default OFF |
group on|off |
Toggles accept group invites. Default ON |
fellowship on|off |
Toggles accept fellowship invites. Default ON |
raid on|off |
Toggles accept raid invites. Default ON |
status |
Lists status of toggles. |
list |
Lists users on your auto accept list. |
save |
Saves settings to ini. Changes DO NOT auto save. |
load |
load settings from ini |
add <NAME> |
Add NAME to the auto accept list. |
del <NAME> |
Delete NAME from your auto accept list. |
addanchor <VALUE> |
Add VALUE as a valid anchor target. Put the entire address inside quotes as it shows in the portal dialog box such as Willow Circle Bay, 100 Vanward Heights |
delanchor <VALUE> |
Delete VALUE from your valid anchor target list. Put the entire address inside quotes as it shows in the portal dialog box such as Willow Circle Bay, 100 Vanward Heights |
Examples¶
- Add bob to your autoaccept list and save the .ini
/autoaccept add bob
/autoaccept save
This command is added by MQ2AutoAccept.