• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
Pocketfarm.mac

Release Pocketfarm.mac 2.11

No permission to download
Join us with Level 2 access RedCents
Overview Updates (6) Reviews (12) History Discussion
Jetanroth said:
INI: 
[Provinggrounds]
Radius=3000
ZRadius=200
Ignore=NONE
Pull=a lightning warrior diodite|a lightning warrior staticfist

This is my INI.
Click to expand...
weird, I farmed MPG also for lightning dudes
I think I started the macro and the only thing I did was /pkf pull lightning
might try that
when I come home I can check my INI entry
 
cannot get it to work on my zerkers trying to run Vxed. I load pocketfarm when in zone and it auto ignores every mob in zone. Works fine with beast with same settings in .ini. No clue where this auto ignore is coming from.
 
This macro does nothing for me other than stand there and flash the box around my warriors name and slowly chase after mobs and not actually hit them when i walk close enough to them. What am i doing wrong? I have radius set to 1000, pull to "a lesser shade" and hit /pkf go
 
If there are any future searchers with same issue of an inactive toon doing nothing. I fixed mine by clearing my xtar slots of friendlies.

Bit of a necro post but this thing has been super useful and it suddenly quit on me.
 
Is there a way to use kissassist ini settings for this instead of mq2melee? I find this is great for melee characters who blitz through lower level stuff with ease, but I have no real idea how to setup a caster properly with mq2melee downshits/holyshits etc! For example this macro works amazing with a basic setup monk who just uses a few things like mend/flying kick and some other abilitys, but i'm at a real loss with how to setup say a necromancer to do the same thing!
 
Is there a way to use kissassist ini settings for this instead of mq2melee? I find this is great for melee characters who blitz through lower level stuff with ease, but I have no real idea how to setup a caster properly with mq2melee downshits/holyshits etc! For example this macro works amazing with a basic setup monk who just uses a few things like mend/flying kick and some other abilitys, but i'm at a real loss with how to setup say a necromancer to do the same thing!
Click to expand...
Easiest way I found was to edit the file directly and add lines such as /cast and /useitem. Right near where I believe /pet attack command already there.

Here is an example of a custom one.
 

Attachments

Last edited:
Cannonballdex said:
Easiest way I found was to edit the file directly and add lines such as /cast and /useitem. Right near where I believe /pet attack command already there.

Here is an example of a custom one.
Click to expand...
I think I found the section you are talking about, unfortunately coding each spell/ability is far beyond my level of expertise!
 
Hey all. For some reason I cannot get pfarm to show up in the launcher. Any advice would be welcome. Many thanks!
 
Hashtag said:
Hey all. For some reason I cannot get pfarm to show up in the launcher. Any advice would be welcome. Many thanks!
Click to expand...
did you "watch" the resource?

1616103004025.png

if you hit that button it should show up on your macros tab of the launcher
 
Hashtag said:
Yeah I am already watching it like jande's 300-350 ts macro which is showing up fine. Nothing for pfarm for some reason...
Click to expand...
i just tested and it added it as expected (as seen above in the screenie)

maybe you need to refresh your launcher or relaunch it
 
I'll keep messing with it. I know it's something on my end. I already made sure the launcher was updated and turned it off and back on before I posted. It's probably something simple but I can't find it. /boggle
 
Hashtag said:
I'll keep messing with it. I know it's something on my end. I already made sure the launcher was updated and turned it off and back on before I posted. It's probably something simple but I can't find it. /boggle
Click to expand...
maybe a reboot is in order
 
Figured it out. I'm a chucklehead. It's embarrassing I tell you... thanks for the help Sic.
 
Hashtag said:
New here. Sorry if I put this in the wrong place.
Click to expand...
no, you're absolutely fine.

Robban was asking if you "watched" the discussion thread instead of the resource - which is absolutely a possibility and something i should have considered and mentioned
 
This macro work like a charm, but if you char do not acquire target when you are running her. Check your Advanced target windows and put every target line on Automatic mode. After raid, on my my Ext. target i was using raid assist, Raid mark 1, 2, 3, etc...
 
I loved this program but after the last update I cant get it to work, any ideas? very possible user error I did try to uninstall and reinstall
 
no errors, it looks like there is no movement, kind of like the /pkf go isnt working,

Ok, updated my meshes and refreshed everything, and its working again. Thanks
 
Last edited:
Is there a line somewhere in the macro that helps with opening doors. Been doing some trade skill mats farming in Frostcrypt and it seems to have an issue opening those doors automatically. Totally works when I click them. Most doors work elsewhere. Just this zone so far it isn't. Thank you! :)
 
Cybermancer said:
Is there a line somewhere in the macro that helps with opening doors. Been doing some trade skill mats farming in Frostcrypt and it seems to have an issue opening those doors automatically. Totally works when I click them. Most doors work elsewhere. Just this zone so far it isn't. Thank you! :)
Click to expand...
that would be an mq2nav function. The macro just tells MQ2 to nav to the mob. If mq2nav can't get you there, welp, /shrug. But yeah, doors can be a pita. The answer is that you're going to have to go and mess around with manually editing the mesh and configuring what doors to auto-click.
 
Many_Whelps said:
that would be an mq2nav function. The macro just tells MQ2 to nav to the mob. If mq2nav can't get you there, welp, /shrug. But yeah, doors can be a pita. The answer is that you're going to have to go and mess around with manually editing the mesh and configuring what doors to auto-click.
Click to expand...

That makes sense, thanks for the heads up. Ill take a peek at it later. Peace out homie!
 
Hi,

Can someone tell me how to keep Burnout up on my mage pet pls? I looked at this whole thread, tried messing with mq2cast and didnt understand how to add it to the file referenced above as an example?
 
Could try something like this under the FindMob Section. Edit your spell.

INI: 
Sub FindMob
|Pet Buff
    /if (!${Me.PetBuff[Burnout IX]}) {
            /cast Burnout IX
            /delay 1s
            /echo \agCasting \ay[\apBurnout IX\ay]
            /delay 1s !${Me.Spell[Burnout IX]}
        }
 
Cannonballdex said:
Could try something like this under the FindMob Section. Edit your spell.

INI: 
Sub FindMob
|Pet Buff
    /if (!${Me.PetBuff[Burnout IX]}) {
            /cast Burnout IX
            /delay 1s
            /echo \agCasting \ay[\apBurnout IX\ay]
            /delay 1s !${Me.Spell[Burnout IX]}
        }
Click to expand...
Thanks, sir. Will give it a go
 
[CODE lang="ini" title="Bard Fix"]|-- Starting at Line 89, if you change the code to the below, bards can /twist while using the macro

/if (!${Spawn[${myTargetID}].ID} || ${Spawn[${myTargetID}].Type.Equal[Corpse]} && !${Me.XTarget}) /call Rest
/if (${Me.Class.Name.Equal[Bard]} && (${Target.Type.Equal[corpse]} || ${Target.ID} == ${Me.ID})) /squelch /target clear
/if (!${Me.Class.Name.Equal[Bard]} && (${Target.Type.Equal[corpse]} || ${Target.ID} == ${Me.ID} && !${Me.Casting.ID})) /squelch /target clear
/if (${Target.Type.Equal[corpse]} || ${Target.ID} == ${Me.ID} || !${Target.ID}) /squelch /attack off

/if (${goFarming}) {
|- Find a Mob To kill
/if (${Me.Class.Name.Equal[Bard]} && (!${Spawn[${myTargetID}].ID} || ${Spawn[${myTargetID}].Type.Equal[Corpse]}) && !${Me.XTarget}) /call FindMob
/if ((!${Me.Class.Name.Equal[Bard]} && !${Me.Casting.ID}) && (!${Spawn[${myTargetID}].ID} || ${Spawn[${myTargetID}].Type.Equal[Corpse]}) && !${Me.XTarget}) /call FindMob[/CODE]
 
Is there any way of using PocketFarm and get my mage to cast spells? She is only chasing the mob as a melee char and no casting at all. Please help.
 
Is there any way of using PocketFarm and get my mage to cast spells? She is only chasing the mob as a melee char and no casting at all. Please help.
Click to expand...
You would need to add the custom code to the macro. I think there is only code for melee and sending pet. Look up through the forum here for some ideas and examples.
 
So, when my character is waiting on spawns it has a habit of standing and sitting needlessly...ideas?
 
So, when my character is waiting on spawns it has a habit of standing and sitting needlessly...ideas?
Click to expand...
Looking at the file it seems this has been an issue.

You could try to adjust the timing for resting around line 213

|if we are resting, and standing, and not casting spells, sit down
/if (${Resting}) {
/delay 30 ${Me.Casting.ID}
/if (${Me.Casting.ID}) {
/message Casting \ao${Me.Casting}
/delay ${Me.Casting.CastTime.Float}s
/delay 5s
} else /if (${Me.Standing}) {
/sit
/delay 5s ${Me.Sitting}
}
}
 
Im using this to farm hides in wakelands, can anyone please tell me or write a script to snare mobs? Seems my guy gets stuck when a mob runs away and wont chase after it or do anything, im using a druid to do this because I dont have a melee class
 
Could try something in the combat section.
INI: 
Sub Combat
    /if (!${Me.Combat}) {
        /squelch /target id ${myTargetID}
        /squelch /face       
        /squelch /attack on
        /if (!${Target.Snared.ID} && ${Target.PctHPS} < 25) /cast snare
        /squelch /face fast id ${Target.ID}
        /varset NoKillCounter 0
    } else /if (${Target.ID} != ${myTargetID}) {
        /squelch /target id ${myTargetID}
        /squelch /face id ${Target.ID}
        /varset NoKillCounter 0
    }
    /if (${Target.Type.Equal[corpse]}) {
        /squelch /target clear
        /varset myTargetID 0
    }
 
You must log in or register to reply here.
Release Pocketfarm.mac
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -