• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Mage

Plugin - MQ2Mage (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (83) Reviews (33) History Discussion Terms and conditions
Many_Whelps said:
Nah, I would not want the automation, in an assist mode, to just start guessing at what to kill in the absence of an MA. Especially if a mez class has everything locked down.
Click to expand...
Just asking as my tank died and my other toons just stood there to die from aggro. I ended up scripting the group to go into tank mode if the mt dies.

burdsjm said:
What are you doing? A react to change to a backup MA if the main MA isn’t alive?
Click to expand...
I have my group chasing me around to kill stuff on the mt. But in chase mode if the tank dies the toons just stand there dying with adds. I scripted the toons to go into tank mode atleast this way they will finish off any mobs on the extended target list while the tank is hovering.

Not sure if this a setup issue or something I'm missing.
 

Attachments

  • Untitled.png
    Untitled.png
    6.6 KB · Views: 2
Sic updated MQ2Mage with a new update entry:

2-2-2022

MQ2Mage
- You can now make the mag force cast the Modulation Shard AA with a "/mag modrod".
-- This means you can have a hotkey on your driving toon or a react to "bct mage //mag modrod" or "/dex mage /mag modrod"
--- and it would recast the AA reguardless if it personally had a modrod or not.
Click to expand...

Read the rest of this update entry...
 
I have set the background fps to 60 tried several other remedies, still have issues with only my mages locking up with the spell book open.
 

Attachments

  • Untitled.png
    Untitled.png
    157.4 KB · Views: 1
Cannonballdex said:
I have set the background fps to 60 tried several other remedies, still have issues with only my mages locking up with the spell book open.
Click to expand...
I would make sure you're using framelimiter.

Would also make sure you dont have some other automation also memorizing or u memorizing spells and getting into a contest

you can also /mag debugbook on and it'll spit out some stuff of where it thinks it is hung up (the debug output about manual mode is not accurate)
 
Last edited:
Sic said:
I would make sure you're using framelimiter.

Would also make sure you dont have some other automation also memorizing or u memorizing spells and getting into a contest

you can also /mag debugbook on and it'll spit out some stuff of where it thinks it is hung up
Click to expand...
Do these settings in the frame limiter overwrite the ingame settings? Just for clarification, I had this at 0 and the ingame settings at 60.
 

Attachments

  • Untitled.png
    Untitled.png
    38.1 KB · Views: 3
Sic said:
I don't think that is doing what you think it is doing.

why are you frame limiting if you're not limiting frames =p

> Framelimiter vid <
Click to expand...
I was frame limiting to 0 and was told to set it to 60, there is two places you can adjust frame limiting, one in game settings and one in the mq settings.

I guess regardless, either setting didn't help my situation :), this is on a fresh login with nothing else running, when i click over to the mage tab he is locked up with the book open, happens on both mages.
 
Cannonballdex said:
I was frame limiting to 0 and was told to set it to 60, there is two places you can adjust frame limiting, one in game settings and one in the mq settings.
Click to expand...
no, that isn't what the faq entry says - it specifically says in your eq alt-o menu, not in framelimiter. those were also to handle the mq2 whackiness with how spellbook is read - mq "next" especially with framelimiter has all but removed any of those issues from anyone.

eq still has a few bugs themselves with the spell book - there are circumstances that you can actually open the spellbook and walk around with it open (you shouldn't be able to). and you can absolutely cause these kinds of things by stressing the limitations of your computer resources out - like by running unlimited with everything loaded 190+ fps (for zero benefit)

so as mentioned, i would just ensure you have frame limiter setup correctly (which will handle your eq game settings) and I would ensure you don't have anything any messing with your spell gems.
 
Cannonballdex said:
I'm told the issue is with background frame limiting. Really not sure.
Click to expand...
...

did you try the things i mentioned?

setting up frame limiter correctly
your eq settings correctly in your alt-o window
the book debug?

myyst, you're not helping here. please don't.
 
Sic said:
I would make sure you're using framelimiter.

Would also make sure you dont have some other automation also memorizing or u memorizing spells and getting into a contest

you can also /mag debugbook on and it'll spit out some stuff of where it thinks it is hung up (the debug output about manual mode is not accurate)
Click to expand...
Yah, I already went through that part from the faq. I was talking about the mq frame limiter as being a third party frame limiter and if it had anything that interfering with why my mages are locking up.
 

Attachments

  • Untitled.png
    Untitled.png
    78.3 KB · Views: 7
I know you run 30+ toons or whatever, I wouldn't run any of that at unlimited frames on any toons foreground or background.

but framelimiter should override that stuff anyhow per how brain explained it.

you still didn't answer the other stuff.

so i dunno what to tell you
 
but in summary:

1. make sure you're not capping resources out by doing things like running at 190+ fps on your 30+ toons. you can and will bug out the spell book window.
2. definitely run framelimiter (this will help with #1)
3. don't run conflicting stuff that would be memorizing/unmemorizing spells.
4. utilize the debug feature i mentioned to try and determine where the disconnect is
5. if you're in an assist mode, usemelee would kick you out of a bugged/stuck book - so that's a last option if you need it
 
Sic said:
I know you run 30+ toons or whatever, I wouldn't run any of that at unlimited frames on any toons foreground or background.

but framelimiter should override that stuff anyhow per how brain explained it.

you still didn't answer the other stuff.

so i dunno what to tell you
Click to expand...
yes, I ran bookdebug, it just just spams the mq window
Code: 
We have no Scibe or MemTicksLeft - Should be Done memorizing/scribing.
Not Manual Mode and Not Byos, we're going to /stand.
We have no MemTicksLeft - Should be Done memorizing.
Not Manual Mode and Not Byos, we're going to /stand.
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
We have no Scibe or MemTicksLeft - Should be Done memorizing/scribing.
Not Manual Mode and Not Byos, we're going to /stand.
We have no MemTicksLeft - Should be Done memorizing.
Not Manual Mode and Not Byos, we're going to /stand.
Spell Book WAS open, now closed.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
No MemSpellInProgress.
Book WAS NOT open, now IS open.
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
Book is open
MemGauge shows: 0.00 ScribeGauge shows: 0.00
Not a big deal, it usually mostly happens upon login. I can live with closing the book to continue.
It's only happening to two of us so I'm guessing its something obvious we are missing.
 
Cannonballdex said:
yes, I ran bookdebug, it just just spams the mq window

Not a big deal, it usually mostly happens upon login. I can live with closing the book to continue.
It's only happening to two of us so I'm guessing its something obvious we are missing.
Click to expand...
that debug doesn't appear to be showing at a time that you say it is bugged.

are you just pasting some stuff randomly from a time that it isn't bugged, because if so i'm not sure what you're thinking that will accomplish :(
 
Sic said:
that debug doesn't appear to be showing at a time that you say it is bugged.

are you just pasting some stuff randomly from a time that it isn't bugged, because if so i'm not sure what you're thinking that will accomplish :(
Click to expand...
Yah, it was. I was kinda wondering why you were asking me to run it after the fact. lol
 
Cannonballdex said:
Yah, it was. I was kinda wondering why you were asking me to run it after the fact. lol
Click to expand...
...

:(

I wasn't.

you had a picture of it stuck (assuming it was stuck when you posted the picture) i was asking you to show what it said during that situation
 
Sic said:
...

:(

I wasn't.

you had a picture of it stuck (assuming it was stuck when you posted the picture) i was asking you to show what it said during that situation
Click to expand...
What is the difference in the process for opening the book and memming the spells between the mage, sk and the shaman, that it would only happen on the mage?
 
Cannonballdex said:
What is the difference in the process for opening the book and memming the spells between the mage, sk and the shaman, that it would only happen on the mage?
Click to expand...
there isn't. it is exactly the same code (as in not copy pasta - literally the same code)

which is why it is almost certainly an issue with resources for that instances which coincidentally ends up being the same toon
 
is there a way to set the Nextmage to chain cast? My mage is just standing here casting pets and leaving spell gems up half the time. It nukes every once in a while, but could be doing a lot more damage.
 
Hey Sic

Before I fiddle around with a React or something, is there any setting I'm overlooking for when to use Mod Rods? (e.g. Mana %)
 
ABDon said:
Before I fiddle around with a React or something, is there any setting I'm overlooking for when to use Mod Rods? (e.g. Mana %)
Click to expand...
Check out AddClicky Information. I am reading this to be auto at 60%. I have never thought about usage as my mage has yet to go oom.
 
Just noticed a mistype in mage plugin, when it says: <age pet is now taunting.
 
Is there any way to change the plugin settings so the group coth spell stays as the last spell gem slot? I'm finding the current options to use group coth as either inconvenient or unreliable.

Thanks,

Dysanor
 
Dysanor said:
Is there any way to change the plugin settings so the group coth spell stays as the last spell gem slot? I'm finding the current options to use group coth as either inconvenient or unreliable.

Thanks,

Dysanor
Click to expand...
byos or you can turn off usedskinDS and gem 9 will stay empty
 
Seems Iceflame Rampart is cast (TOV 114) instead of Iceflame Barracade (TOL 119). Tried removing/blocking on spell on pet and older spell is added back on.
 
csguy0 said:
Seems Iceflame Rampart is cast (TOV 114) instead of Iceflame Barracade (TOL 119). Tried removing/blocking on spell on pet and older spell is added back on.
Click to expand...
thx. this might have been one that was borked in beta and we didn't catch it for live. i'll fix it

you can always see what spells we look at using when the plugin loads and it says what spells it uses.
 
I already own MQ2Bst and Enc, and use a Mage as the controller. Will MQ2Mage work as a helper to keep me properly buffed, pet buffed and armed if I leave it in manual mode all the time?
 
DrmChld said:
I already own MQ2Bst and Enc, and use a Mage as the controller. Will MQ2Mage work as a helper to keep me properly buffed, pet buffed and armed if I leave it in manual mode all the time?
Click to expand...
yes. manual mode is for movement and assisting for melee purposes.

you will still do attacking stuff if you have an MA set, even in manual mode.
 
Sic said:
yes. manual mode is for movement and assisting for melee purposes.

you will still do attacking stuff if you have an MA set, even in manual mode.
Click to expand...

Thank you, I decided to go ahead and buy it anyways before I received any answers lol
 
You must log in or register to reply here.
Plugin - MQ2Mage
Next unread thread 🦁

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Back
Top
Cart

Cart

Total -