Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What are your stats with that load? Memory and cpu usage?I can load about 9 groups on the 2700x. Probably run into a GPU bottleneck before you use all of that CPU. No one believed me when I said intel better watch out when the first generation of ryzens were released. Go benchmark that 3950x vs almost anything intel has right now and it will come out ahead way ahead.
What are your stats with that load? Memory and cpu usage?
I'm looking forward to the threadrippers from this generation as well. Should be brutal. Sadly they don't get seem to have a similar laptop ryzen chip yet that competed well in the 6c/12t range.
Using AMD RX 580 GPU and 64 gbs of 3200 DDR4. Ram really isnt an issue you use about 600 mbs per instance and CPU wise .5 to 1.5 % You do notice some system lag though probably too many instances up for an 8 core CPU.
after a while the RAM usage drops to 32GB, so I am guessing you can run 12 on 32GB RAM
Thats because windows 10 moves a lot of what EQ uses to virtual memory. Click the memory tab and screenshot that You should have over 90gbs committed. I have 101 with 9 groups and the problem is you cant clear that without reloading all the toons and it keeps going up and up and up. Go to details and screenshot how much ram is committed to each eqgame.exe mine are over 3 gbs each.
For those who are curious, this is what it's like with 12 full groups running KA, MQ2EQwire on, MQ2FPS off
View attachment 20287
mq2eqbc hotkeysany tips on managing the toons? I am up to 30 now and it’s starting to be a pain in the butt and running out of isboxer shortcut keys.
Life is unfair...I run a 3950x with 2070 Super OC and 128gb of DDR4 3600 with 21 toons and never use more than 26% of CPU and 35% GPU and about 32gb out of the 128 with zero issues. I also have NVMe memory they load super fast.
Life is unfair...
For when you want to box two raids at once... https://www.amd.com/en/products/cpu/amd-ryzen-threadripper-3990x
For when you want to box two raids at once... https://www.amd.com/en/products/cpu/amd-ryzen-threadripper-3990x
Doesn’t AMD down clock the per core the higher the core count? If so would explain why the lower end cpu ran better. Faster per core performance.I tried a 3970x setup (32 cores 64 threads) version and eq ran very poor on it. Even after tons of tweaking. I did a 3950x setup and it ran far better than the 32 core version did.
If you want the best of both worlds, cores and speed then just get a W3175X the intel 28 core desktop version.
Doesn’t AMD down clock the per core the higher the core count? If so would explain why the lower end cpu ran better. Faster per core performance.
The 3970 is 3.7 across all cores or should be. The 3990 is the one thats only like 2.9
I don't see why the 3970x would run bad with EQ honestly.
It under performs because basically their higher core cpus are just multiple cpus tied together under the hood. Where intel 28 core is 1 cpu the amd 64 core is really 8 8 core cpus. The issue is how windows talks to each core, and it doesnt do it well although its getting better.
That's how all the threadrippers are. The 1st gen ones suffered from this, but the newest ones were supposed to have improved greatly in this.
have you considered checking out mq Next? the performance increases are pretty substantial especially with the > Framelimiter <Begins casting resurrection on an old thread:
I am looking for some tech help. I am having issues with more than 30 clients running. I get graphic freezing and lag. Sometimes swapping windows is giving me issues where everything freezes for 5-10 seconds.
system:
3950x
64g ram
3070ti
1tb NVME
MQ2:
EQwire
Kissassist
CWTN plug-ins
External Programs:
Gina
EQ Settings:
Old Models
75 FPS/30 fps
Pixel shaders/environmental 2.0 off
Spells:Me + NPC
Most other settings set to “medium”
thanks for any input
have you considered checking out mq Next? the performance increases are pretty substantial especially with the > Framelimiter <
I would download with the vv launcher -> run knightly's migrator utility -> run it.great video. I have not switched over to mq next. I need to check it out. Maybe this weekend.
How hard is the learning curve? I haven’t been following it a lot. Thanks for the suggestion!
Begins casting resurrection on an old thread:
I am looking for some tech help. I am having issues with more than 30 clients running. I get graphic freezing and lag. Sometimes swapping windows is giving me issues where everything freezes for 5-10 seconds.
system:
3950x
64g ram
3070ti
1tb NVME
MQ2:
EQwire
Kissassist
CWTN plug-ins
External Programs:
Gina
EQ Settings:
Old Models
75 FPS/30 fps
Pixel shaders/environmental 2.0 off
Spells:Me + NPC
Most other settings set to “medium”
thanks for any input