• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Eskay

Plugin - MQ2Eskay 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (77) Reviews (58) History Discussion Terms and conditions
Sic said:
crash wouldn't do anything that would persist and make it so you can't pull - i also checked the ID and didn't see the crash

- did you check your endurance on your sk? i did patch today and mentioned you'll want to check that


I did just double check it is working as intended, and it appears to be the case


What is your "group watch" setting set to?>
can you snip me your pull settings info

for example:

View attachment 65525
Click to expand...
1728932797863.png
 
ok i found the issue. stand by for a re-build.

Until after the rebuild i don't need anything further.

thanks
 
ok i found the issue. stand by for a re-build.

Until after the rebuild i don't need anything further.

thanks
 
tl;dr - once you're needing rest it was like "yes, let's rest forever", should be corrected when patch hits.

thanks again
 
theocracy said:
Is there a way to disable using Withstand combat skill? Listed under Spell Group Repel
Click to expand...
no, and absolutely no intention of adding one. this runs into one of those "are you sure you want mq2eskay to be running if you don't want us to do that thing"

is there some reason as your level point, that you would want to? is this a situation of not having "modern endurance" so it is spending too much?
 
Sic said:
no, and absolutely no intention of adding one. this runs into one of those "are you sure you want mq2eskay to be running if you don't want us to do that thing"

is there some reason as your level point, that you would want to? is this a situation of not having "modern endurance" so it is spending too much?
Click to expand...
Correct. Doing puller tank and uses a bunch of endurance so stops every so often to regen to full, when it's really not needed. Not on Live so endurance is limited.
 
theocracy said:
Correct. Doing puller tank and uses a bunch of endurance so stops every so often to regen to full, when it's really not needed. Not on Live so endurance is limited.
Click to expand...
that makes sense, I'll change it so if you don't have "modern endregen" you'll only use it while burning - we do a few things like this for the other end regen classes (like war).
 
fliznax said:
sk not pulling i adjusted high low filter and radius but it seems like it should work
Click to expand...
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<< :)

Please make sure to check the "how to ask for help" to provide enough information to help you.

Did you follow the instructions in the FAQ?

/shd debugpull on once will spit out all the mobs and the reason it didn't pull them. Then you can determine why

It could be your mesh.
It could be min/max level.
It could be mobs on ignore.
If you're levitating, try cancelling it and hitting your resetcamp button.
Mobs could inaccessible (under the world).

You didn't mention where, what mobs, what your pull settings are, etc
 
I renewed my license, but it isn't showing. Still shows as being expired under my licenses.

Paypal
Transaction ID
09A21909H2957464U
 
eqsubi15 said:
I renewed my license, but it isn't showing. Still shows as being expired under my licenses.

Paypal
Transaction ID
09A21909H2957464U
Click to expand...
1733184855544.png

@ChatWithThisName tagging in chat so he can cross reference his paypal

1733185186162.png
looks like paypal says it is unpaid. did you check your paypal to see it was processed?
 
Sic said:
no, raid mode does not adjust if you should or should not do taunting things

but this chart is in the overview page
View attachment 28925
Click to expand...
I'm so sorry for the stupid question but I've tried searching and watching your videos and just can't seem to figure this one out.

I'm using your plugins for a number of toons and I love it and it works GREAT in a group game but when I raid, things work well most of the time but every now and then, when in manual mode, my SK will still auto-taunt even when I just want to play him more as an assist/offtank role. The way I have it set up is Ill use the plugin on Manual but set him as Main Assist in my group because that's the only way I can seem to easily get all my other toons to assist and heal him. Like I said, that works flawlessly in a group game but I really don't want him taunting off the MT in a raid setting. Is there something I should be doing differently?

Thanks for any help and thanks so much for putting these things out there! I couldn't play this game without them!
 
ojizosama said:
I'm so sorry for the stupid question but I've tried searching and watching your videos and just can't seem to figure this one out.

I'm using your plugins for a number of toons and I love it and it works GREAT in a group game but when I raid, things work well most of the time but every now and then, when in manual mode, my SK will still auto-taunt even when I just want to play him more as an assist/offtank role. The way I have it set up is Ill use the plugin on Manual but set him as Main Assist in my group because that's the only way I can seem to easily get all my other toons to assist and heal him. Like I said, that works flawlessly in a group game but I really don't want him taunting off the MT in a raid setting. Is there something I should be doing differently?

Thanks for any help and thanks so much for putting these things out there! I couldn't play this game without them!
Click to expand...
Use raid mode or turn off autoassign roles (IE your in group mode, its like SK, MA (auto MT).
 
Plugin doies not taunt if you are not marked as MT is my understanding. You may way want to double check/consider;

1) Hate mask
2) Check your spells. Ones like Insidous will generate hate
3) Disable bold attacks AA
 
ojizosama said:
I'm so sorry for the stupid question but I've tried searching and watching your videos and just can't seem to figure this one out.

I'm using your plugins for a number of toons and I love it and it works GREAT in a group game but when I raid, things work well most of the time but every now and then, when in manual mode, my SK will still auto-taunt even when I just want to play him more as an assist/offtank role. The way I have it set up is Ill use the plugin on Manual but set him as Main Assist in my group because that's the only way I can seem to easily get all my other toons to assist and heal him. Like I said, that works flawlessly in a group game but I really don't want him taunting off the MT in a raid setting. Is there something I should be doing differently?

Thanks for any help and thanks so much for putting these things out there! I couldn't play this game without them!
Click to expand...
check the overview, there is a giant picture that tells you when you taunt.

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<< :)


1733413204302.png
 
all of that other stuff is extra outside of the basics of what is happening.

if do tanking and tanking stuff if you are group assigned main tank or are in a tanking mode.

if you are group leader and go into a tanking mode, we assign you group main assist and group main tank (you can temporarily turn off that with the "setgrouproles" option).

but we don't do taunting and tanking type things unless you are currently group main tank, or are in a tanking mode.
 
Gah - I'm an idiot. What the flowchart doesn't show (or at least what I didn't pick up from it) is that some point between setting manual mode and going to the raid, it looks like I'll occasionally go into another mode that surreptitiously assigns me as MT. I think what's happening is that when that happens, he will taunt even if he's in Manual mode because of the group assignment. I think I've been having what seems to be varying results because sometimes I 'll have that MT designation and sometimes I wont. So sorry for being stupid but thanks so much again for all you do!
 
ojizosama said:
Gah - I'm an idiot. What the flowchart doesn't show (or at least what I didn't pick up from it) is that some point between setting manual mode and going to the raid, it looks like I'll occasionally go into another mode that surreptitiously assigns me as MT. I think what's happening is that when that happens, he will taunt even if he's in Manual mode because of the group assignment. I think I've been having what seems to be varying results because sometimes I 'll have that MT designation and sometimes I wont. So sorry for being stupid but thanks so much again for all you do!
Click to expand...
no. there isn't random stuff happening.

if you're group leader and go into a tanking role, we assign you group main assist and group main tank (because you went into a tanking role, which is what it says it is, a role to tank in). there's nothing unusual about that.

but i just explained that

you can either a: use healers instead of tank classes for group leaders in a raid, or b: temporarily turn off the setgrouproles (as i mentioned)

also: knock it off with the mean shit you're saying about yourself. you're not an idiot, you're not stupid.
 
Wrong forum
SK CWTN - SK wont pull, states he has rez sickness. He does not. I have cleared all spells off, and he is still stating he has rez sickness in the plugin output. Anyone had this issue? Logging off and back on does not resolve either.

Thoughts?
 
Does it state specifically the SK, or generally? Maybe it's the specified healer.

Also, do you have any bodies visible? I think it will pause hunting/tanking until the bodies that are visible are taken care of.
 
Ran all expedient recoveries, no corpses anywhere. Happened this morning with caster healer in group, and doing it now with merc healer in group.
 
stuff said:
Does it state specifically the SK, or generally? Maybe it's the specified healer.

Also, do you have any bodies visible? I think it will pause hunting/tanking until the bodies that are visible are taken care of.
Click to expand...
And it's the SK's output saying "I have Rez sickness".
 
RebelHeartActual said:
SK CWTN - SK wont pull, states he has rez sickness. He does not. I have cleared all spells off, and he is still stating he has rez sickness in the plugin output. Anyone had this issue? Logging off and back on does not resolve either.

Thoughts?
Click to expand...
please post in the right area.

we check all your buffs/songs and write that to a file, and then read what the file says.

if it says you have rez sickness, your buff file says you have rez sickness (or revival sickness)

you'll want to ensure that you dont have any files "locked" by antivirus or file syncing, so those files can be written/read from properly.
 
Sic said:
please post in the right area.

we check all your buffs/songs and write that to a file, and then read what the file says.

if it says you have rez sickness, your buff file says you have rez sickness (or revival sickness)

you'll want to ensure that you dont have any files "locked" by antivirus or file syncing, so those files can be written/read from properly.
Click to expand...
Sorry about the wrong post, i figured teh general CWTN Plugin may be better than the SK plugin.

The toon does not have rez sickness, so something else was going on. Rez sickness doesnt last 3 hours.

I turned virus protection off, and tried again, same issues.

I've used Eskay for almost 2 years now, and never had this issue before. Still don't know the cause.
 
RebelHeartActual said:
Sorry about the wrong post, i figured teh general CWTN Plugin may be better than the SK plugin.

The toon does not have rez sickness, so something else was going on. Rez sickness doesnt last 3 hours.

I turned virus protection off, and tried again, same issues.

I've used Eskay for almost 2 years now, and never had this issue before. Still don't know the cause.
Click to expand...
Dunno, is restart after turning off vp. Just because you turned it off also doesn't mean it didn't quarantine files that are now locked
 
RebelHeartActual said:
Just doesn't make sense that after 2 years, this just started being a problem.
Click to expand...
Well. It does if your antivirus quarantined files associated with hacking software.

Folks recommend whitelisting your MQ, EQ, and RG folders.

But as I mentioned, even if you "disabled" your antivirus, you'll want to make sure you don't have any files locked, quarantined or otherwise hostage.
 
Sic said:
Well. It does if your antivirus quarantined files associated with hacking software.

Folks recommend whitelisting your MQ, EQ, and RG folders.

But as I mentioned, even if you "disabled" your antivirus, you'll want to make sure you don't have any files locked, quarantined or otherwise hostage.
Click to expand...
Files arent locked or quarantined.
 
RebelHeartActual said:
Files arent locked or quarantined.
Click to expand...
I've reviewed the code and I cannot find any issue with it. Also you're the only person that is currently having the issue.
I'm not saying that you are imagining things or anything like that. Just that we can't find the issue and nobody else is having the issue at this time.

If you hold Alt and look at your long buff window, does it show rez sickness is there (even though there is no icon?)
 
You must log in or register to reply here.
Plugin - MQ2Eskay
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -