-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
Myysterio, i already said i would take a look at it.
why is it with you every time it is 50 rounds dude. like c'mon, knock it off.
from now on I'm just going to start deleting your messages or moving them to fippy if you're going to continue to choose to be like that.
Is their a trick to getting MQ2Enchanter to recognize Berserkers as Melee to buff them with Night's Endless Terror, and Haste?
Enc and zerk are both running the respective CWTN plugin's for the life of me I can't get the Enc to buff the Zerk with haste/night's endless. Am I doing something wrong? The Enc will buff the War just fine however with those buffs.
Enc and zerk are both running the respective CWTN plugin's for the life of me I can't get the Enc to buff the Zerk with haste/night's endless. Am I doing something wrong? The Enc will buff the War just fine however with those buffs.
nope, but they need to be local toons on cwtnbuffs like all buffs
the buffs need to not be blocked, and they have to stack.
Last edited:
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,085
you can't
you dont.
you probably are wondering why you're not using addle (SingleMez) - this is because you have usechaotic turned on.
if you want to use addle and not chaotic - turn usechaotic off and your SingleMez spell will go in gem slot 3
> MQ2Enchanter FAQ <
Q. Why am i not memorizing my Single Target Mez?
A. You probably have usechaotic turned on, in which case we use chaotic mez. If you want to memorize your single target mez, you would want to turn that off.
someone else mentioned it wasn't in the build. I'm looking into it now
If they're not, they should be and will be in the future.
darkfurlord
Member
- Joined
- Jul 31, 2016
- RedCents
- 28¢
Is there away to make chanter cast say iksar illusion on certain characters using this?
No we don't do illusions
darkfurlord
Member
- Joined
- Jul 31, 2016
- RedCents
- 28¢
Quick question, do you know what skills or AA's its using that drain mana so quickly? Is it UseChaotic or the Nukes or UseGlyph?
Enchanter runs out of mana faster than my Mage on AlwaysBurn.
No issues with the program, highly recommend to anyone that wants to box an enchanter!
Enchanter runs out of mana faster than my Mage on AlwaysBurn.
No issues with the program, highly recommend to anyone that wants to box an enchanter!
useglyph uses glyph - not mana.
adjust your nukemanamin/dotmanamin if you want more mana
usechaotic is going to use a lot of mana, so definitely there.
not sure if you were saying that you had burnalways on, on your enchanter - but would not recommend leaving that on
I would also check that you're not in a conflicting buffing competition with another toon during downtime
Last edited:
If you're getting hit a lot it's likely UseMindOverMatter
blu_leader
Member
- Joined
- Mar 27, 2007
- RedCents
- 100¢
Does anyone else have a problem with the MQ2Enchanter plugin causing FPS dips on enchanter window? Mine drops to around 25-40fps(foreground) when it is active. I can pause it and it will jump back up to 80-90(foreground). I also run Monk/shm/cleric/sk/zerker (CWTN/Sic plugins) which doesn't have the same affect and all run 75-90fps. Also, I have no FPS limiter active MQNext, EQ, or windows/Nvidia. Computer is quite new as well. 64GB DDR4 RAM at 3600MHz, a i9-10980XE processor, Nvidia RTX 3080 graphics card, running on a Firecuda 520 SSD.
make sure you don't have any file scanning happening on changes - like antivirus or similar file syncing like onedrive etc. your mq/eq should probably be exempted/white listed from those things.
this will almost certainly be because you're checking your cwtnbuffs file - and if those are syncing or getting scanned, you can have things like you mentioned.
> Read Here <
it is more likely to be where at in your loading order and what resources your comp is giving it than just enchanter specifically
also, i strongly encourage you to use my recommended framelimiter settings there really is no benefit to trying to run eq at higher frames, and all you end up doing is stealing resources that could otherwise be used elsewhere
blu_leader
Member
- Joined
- Mar 27, 2007
- RedCents
- 100¢
Checked my usage prior to posting, as far as I can see, is nothing really going on. roughly the same CPU utilization, RAM, and power usage across all 7 accounts with power to spare. No active Spy/spam/anti-virus. No active syncing or backups. Also doesn't seem to matter where/how I load in the accounts rather the enchanter is first, middle, or last it has the same effect. I can load in another 6 accounts and the enchanter while using CWTN is the only one that dips fps. I can pause it and it goes away. (NOT saying it is CWTN, most likely something that is interfering with it) It doesn't make in unplayable, just even at 50-60fps I can notice a alot of stutter when panning the camera around and the animations are choppy. So it's annoying.
Also noticed, it seems to happen while waiting for spell refresh during rebuffs of the short duration buffs (ei; Eclipsed Auspice, Mana Rebirth, Nights Terror). to be cause on the respective classes. During the 2mintues between it seems fine.
It's not failed me yet so I'll roll with it.
Also noticed, it seems to happen while waiting for spell refresh during rebuffs of the short duration buffs (ei; Eclipsed Auspice, Mana Rebirth, Nights Terror). to be cause on the respective classes. During the 2mintues between it seems fine.
It's not failed me yet so I'll roll with it.yup, like i mentioned, i suspect it is due to when it is checking for buffs - did you click that post i shared?
I suspect if you went byos instead, you would likely not see the same thing
eventually our buff handling will include the ability to use dannet instead of how we currently handle buffs
I suspect if you went byos instead, you would likely not see the same thing
eventually our buff handling will include the ability to use dannet instead of how we currently handle buffs
Last edited:
Jrayjanssen
Member
- Joined
- Nov 14, 2021
- RedCents
- 73¢
I'm using MQ2ENC / Mule assist and trying to get my enchanter to automatically re-charm the same mob. I see a few different threads mentioning /charmthis [Target] but I get this error message "This is not a valid command. Please use /help]
I'm wondering if this command still works, or if it's done another way. Does anyone know the correct command to configure this?
thank you!
I'm wondering if this command still works, or if it's done another way. Does anyone know the correct command to configure this?
thank you!
gpag
Active member
- Joined
- Jul 11, 2016
- RedCents
- 385¢
It’s a command for muleassist. It’s glorious. Post over in the mule section about it as to not muddy up here.
That said, I’m using Mq2enchanter 98% of the time. Just not if I want the same pet for a given length of time.
Addclicky question on my chanter and screenshots below. When I place a Sanguine mind crystal on my cursor and /enc addclicky healthself, it gives the "plugin paused warning and does not add it as the first image indicates below. If I unpause the plugin, it no longer allows you to hold the item for 15 seconds but rather instantly drops it into inventory so I can't test if I can add it with the plugin unpaused. Second image is the response if you try to addclicky without the item on my cursor, so the addclicky command is trying. Assuming the plugin has to be active to /addclicky (which seems like common sense), looks like the 15 second delay before it auto inventories items on your cursor is not functioning post patch.
I tried the same thing with my mage plugin and it waits the 15 seconds if that helps!
edit - seems to only be doing it with self summoned items. It also does it with Azure Mind Crystal, but not the summoned rods from the mage
I tried the same thing with my mage plugin and it waits the 15 seconds if that helps!
edit - seems to only be doing it with self summoned items. It also does it with Azure Mind Crystal, but not the summoned rods from the mage
Oh, thanks, didn't realize that. I'll assume the same goes for the Azure Mind Crystal then. Is it safe to assume the common character summoned items by that particular toon are utilized by the plugin? Example, mage summons Dazzling Shard. Does mage plugin auto use it or should it added to addclicky? Since Enchanter does not summon it, the enchanter would need to addclicky that item?
Again, sorry to bother. Thought I found two separate issues and was torn between posting them so they can be shared and buggin you all. Thought the sharing would be a better choice.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,111
I seem to have broken my chanter somehow.
She was buffing xtargets out of group as expected and now she doesn't mem any spells or buff.
As you can see byos is off, I am not invis either. I have the buff plugin loaded also and all characters are on the same machine.
I am on the test server.
I have tried to unload the enchanter plugin and reload it. Still observe the same behavior.
Is there a way to turn on logging so I can get more useful info?
She was buffing xtargets out of group as expected and now she doesn't mem any spells or buff.
As you can see byos is off, I am not invis either. I have the buff plugin loaded also and all characters are on the same machine.
I am on the test server.
I have tried to unload the enchanter plugin and reload it. Still observe the same behavior.
Is there a way to turn on logging so I can get more useful info?
Attachments
Well Xtarget still need to be local characters on your local PC, running mq2cwtnbuffs, not just on the chanter. Other than that there isn't anything else.
I would consider relogging that toon, or reloading your ui in case you have some eq or ui issue
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,115
Long long time ago when testing casters I added a mage pet to the xtarget list as specific target and it caused some issues with healing on a character. I can't recall which plugin I was working on at the time, but if you're adding pets consider removing them to see if that fixes the issue.
wasn't a pet issue. It fixed itself after I zoned the out of group characters. Not sure how to explain it but I will take it as a win.
Have been running this plugin trouble free for awhile, however after updating MQ this morning to the release RG pushed last night the enc goes into spell mem'ing loops and never casts them. pausing the plug and manually casting allows me to advance to the next problematic spell however this issue is being persistent. Have cleared all spell gems and let the plug re-mem them with no luck getting past gem 8. Any help or advice? Did not have this issue prior to the MQ update last night/ this morning. It's lightening fast spam flipping between the two spells, never attempting to cast the buffs etc.
I'm having an issue with the enchanter where he's mezzing the target that's currently being attacked. He does this once only once per fight/mob. He doesn't have any isuses mezzing adds, he'll just mez the current target being already killed. Maybe it's a setting that i have wrong but i never had an issue with this in the past.
MQ2Enchanter FAQ
Q. Why does it cast Chaotic on the mob we're fighting?
A. We use Chaotic for purposes of the twincast it gives.
If you don't want it to use Chaotic you can /enc UseChaotic off
are you thinking of chaotic line?