• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Enchanter

Plugin - MQ2Enchanter 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (117) Reviews (34) History Discussion Terms and conditions
Worked it out. Thanks for the help. Now for some reason, only the War is going into the Instance. I have run it like 200 times just fine, then this started happening. Sigh. This issue isn't for this forum of course.
 
My enchanter isnt using his robe when it comes to /addclicky. What am I doing wrong? Is nuking and Dotting and can even /enc burnnow... but will not click robe.

1659749852582.png
 
Myysterio said:
My enchanter isnt using his robe when it comes to /addclicky. What am I doing wrong? Is nuking and Dotting and can even /enc burnnow... but will not click robe.

View attachment 41250
Click to expand...
i keep mine in burn and manaself and mine works as expected (but i can remove it from manaself and just check burn)

are you sure it just is going to stack with whatever other buffs you have at the time?
 
Sic said:
i keep mine in burn and manaself and mine works as expected (but i can remove it from manaself and just check burn)

are you sure it just is going to stack with whatever other buffs you have at the time?
Click to expand...
I can manually click it all day long... it just wont click it on its own. The only thing it doesnt stack with are other robe clicks and the item isnt red, its just unused.
 
Myysterio said:
I can manually click it all day long... it just wont click it on its own. The only thing it doesnt stack with are other robe clicks and the item isnt red, its just unused.
Click to expand...
that's not what i'm asking, but we're not going to go back and forth as usual.

I'll take a look at it, i don't need anything further from you. thanks

if there is an issue it should be easy to find - I'm *guessing* it is a target type issue - and using it manaself would skip that, so i never noticed on any of my enchanters - but like i said i'll take a look.

thanks for reporting
 
well i figured out why (99% sure).

you probably (like me) have form of mana blocked.

I'll have to spend some time with this to correct it otherwise

in the mean time unblock form of mana and it should start using it for offensive/burn
 
Sic said:
well i figured out why (99% sure).

you probably (like me) have form of mana blocked.

I'll have to spend some time with this to correct it otherwise

in the mean time unblock form of mana and it should start using it for offensive/burn
Click to expand...
ugh, form of mana is awful. Thanks for looking into it.
 
Currently doing BoA mission with my caster group (I previously ran a melee group why this is just now coming to my attention) My amazing enchanter has killed herself 3 times Running to get LoS on mobs (pally stun op here) when I run away on my group for the lamp call outs. Is there a chance to make a "Move for LoS" toggle for enchanters to prevent un-needed deaths in specific situations like this? There are other situations as well that LoS has been an issue such mezzing rats in Zlandicar to which instead enchanters run up the stairs to meet the rats and instead meet a very swift death. I am aware this can be solved by lowering campradius of the toon but then i have to wait for them to be in range for mez instead of just hitting it from where they stand as soon as LoS is available and any other enchanter things to happen so its counter productive.
 
Lugnut said:
Currently doing BoA mission with my caster group (I previously ran a melee group why this is just now coming to my attention) My amazing enchanter has killed herself 3 times Running to get LoS on mobs (pally stun op here) when I run away on my group for the lamp call outs. Is there a chance to make a "Move for LoS" toggle for enchanters to prevent un-needed deaths in specific situations like this? There are other situations as well that LoS has been an issue such mezzing rats in Zlandicar to which instead enchanters run up the stairs to meet the rats and instead meet a very swift death. I am aware this can be solved by lowering campradius of the toon but then i have to wait for them to be in range for mez instead of just hitting it from where they stand as soon as LoS is available and any other enchanter things to happen so its counter productive.
Click to expand...
be in manual mode (you will still assist and dmg and mez, just not do any movement), or adjust your camp/campradius

> MQ2Enchanter FAQ <

Q. My enchanter is sometimes moving to do stuff when I don't have usemelee on?
A. If you are in any mode other than manual mode, you will move to mez if you don't have line of sight and the mob is in your camp radius
 
I was wondering, my lvl 111 chanter still uses Chaotic Delusion for mez even though it works only on mobs up to lvl 113 when it has Deceive RK II available which works up to lvl 118. Is it because Chaotic may trigger twincast? I am finding most of the mobs in EW are resisting his mezzes. I wanted to check before I go BYOSCustom
 
Below is in the FAQ Sic linked. Looks like you are dead on!


Q. Why does it cast Chaotic on the mob we're fighting?
A. We use Chaotic for purposes of the twincast it gives.
If you don't want it to use Chaotic you can /enc UseChaotic off
 
they will use the chaotic line instead of the ethrall line mezes. ive never seem to have this issue that your explaining but the chaotic line is alot better imho
 
Psy said:
Below is in the FAQ Sic linked. Looks like you are dead on!


Q. Why does it cast Chaotic on the mob we're fighting?
A. We use Chaotic for purposes of the twincast it gives.
If you don't want it to use Chaotic you can /enc UseChaotic off
Click to expand...
i didnt know of this setting so if its off it will utilize the etherall line? both single and AE?
 
Yeah I saw that entry in FAQ so I turned it off but kept memorizing Chaotic. I changed to BYOSCustom and it kpe overriding it and memming chaotic. I finally restarted the plugin and seem to be keeping it and using it now.

they will use the chaotic line instead of the ethrall line mezes. ive never seem to have this issue that your explaining but the chaotic line is alot better imho
Click to expand...

I think the issue is the mob lvl. Most of the stuff I am fighting is lvl 114+ so chaotic just wont land
 
of course the chaotic line is by expax and your lvl so there is a line for 101-105, 106-110, 111-115, 116-120 and if your enchanter is at a lower level then the expax then i would assume the current chaotice line wont land on the mob your after.
 
KS1980 said:
might want to possibly update your spells? /enc missing will output what your missing
Click to expand...
Yeah, all updated. I don't get a chaotic upgrade until 113 so 2 more levels. In the meantime it's Deceive for me :)
 
so that solves your issue with the chaotic line as your using the 106-110 chaotic line and yeah those wont help thqat issue u have but at least its resovled
 
KS1980 said:
i didnt know of this setting so if its off it will utilize the etherall line? both single and AE?
Click to expand...

To the best of my knowledge, the single line mez and ae mez are handled separately so the chaoticxxx setting should not affect your ae line.

From what I have seen it will load/use either the PBAEMez or TargetRingAEMez depending upon which of those two will have a higher mob level limit. The PB also adds a debuff, but the duration is shorter.

I was concerned a while back because there was a gap between my single and AE Mez. I updated the PBAEMez line and bam, no more gap.

If I am mistaken, I am sure Chats or Sic will clarify.
 
well if he is trying to cast a ghaotic line thats not of the lvled mob which we identifed then thats the issue. clearly cant cast chaotic on a 113 mob when your chaotic line is that on a lower level and not of that lvl expax
 
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

Berkz said:
Yeah I saw that entry in FAQ so I turned it off but kept memorizing Chaotic. I changed to BYOSCustom and it kpe overriding it and memming chaotic. I finally restarted the plugin and seem to be keeping it and using it now.



I think the issue is the mob lvl. Most of the stuff I am fighting is lvl 114+ so chaotic just wont land
Click to expand...
Byos custom does not Willy nilly memorize something. That is the point of it, but keep in mind, just because you slap a random spell in byos custom does not mean it uses it.
 
My two cents after a long time use. Turn off use chaotic, tashthenmez, and charm. They’re nice to have but eventually just end up screwing your flow. Note: i roll with a bard and enc and even then i turn that off.

Ladt thing i need after pulling up a queue on 10-12 even,yellow, red cons is any drama…i want everything but what i’m hitting asleep 💤

Gekko said:
To the best of my knowledge, the single line mez and ae mez are handled separately so the chaoticxxx setting should not affect your ae line.

From what I have seen it will load/use either the PBAEMez or TargetRingAEMez depending upon which of those two will have a higher mob level limit. The PB also adds a debuff, but the duration is shorter.

I was concerned a while back because there was a gap between my single and AE Mez. I updated the PBAEMez line and bam, no more gap.

If I am mistaken, I am sure Chats or Sic will clarify.
Click to expand...
So i ran into this too because i dont usually krono toons till 110’and I wanted my gold/silver enchantes to use beam first…but then inunderstood why they use spells first, FTP chars cant rely on AA’s so they try to use spells first.

Maybe that’s not the why…but its the only way most if it works. I had a back and forth with @Sic on it and for best outcomes you do want to get your aa’s asap for optimal performance that’s why i usually recommend tank/cleric/enchanter krono order…then dps
 
Question:

1661881880143.png

although i havent noticed this before but i would assume that the enchanter would utilize the AA versus the spell.

1661881940356.png

he is not using the AA tash and elects to use the spell tash.

1661882004101.png

1661882064794.png
even though i have the tash aa at max. so he is casting the group version versus the AA. Any ideas? and Thanks
 
thx sic so should tash be disabled and tash AOE enabled?

KS1980 said:
thx sic so should tash be disabled and tash AOE enabled?
Click to expand...
got it

1661882559130.png

thanks so much sic

now that thats rectified, another question. Does MQ2Enchanter just not have a spell set for gem slot 13? im not using BYOS but i can load up any spell on gem slot 13 or just delete all slot 1-13 and he only memes spells for slot 1-12. thanks
 
@KS1980 assuming your 120 (maybe it works on lower levels) mem your nuke that gives mana back to the group(can’t recall name on my phone) in slot 13. Plug-in will use that spell.
 
Is there a way to set the Plugin Output to only show the spells that it will use? I am not really interested in spells that are way below current level nor spells that it will never load.

I am thinking /enc reload is my best bet and then just purchasing the highest lvl from each group.....
 
Last edited:
Oldman66 said:
Is there a way to set the Plugin Output to only show the spells that it will use? I am not really interested in spells that are way below current level nor spells that it will never load.

I am thinking /enc reload is my best bet and then just purchasing the highest lvl from each group.....
Click to expand...
No, it only outputs spells we use :p just because we don't memorize it fulltime doesn't mean it won't use it under different circumstances like byos.

And nah, yo[BGCOLOR=initial]u don't even need to reload. Just buy the highest level one, and then it won't show the lower level ones unless you need more than one from that spell line, in which case it will show the next best ones.[/BGCOLOR]

It intentionally spits out all of the sub ones for several different reasons
 
Thank you Brother! I am clueless on enchanter spells. /enc missing is giving me all spells and levels. If I use /enc reload it shows the same list but adds which group the belong to. Spells for dummies(me) :xd:
 
Question: Throttling Grip

Although I have set USEDOT off and USENUKE OFF, is there a reason why the enchanter continues to cast Throtlling Grip?

1662385297744.png

1662385342113.png

Thanks.
 
KS1980 said:
Question: Throttling Grip

Although I have set USEDOT off and USENUKE OFF, is there a reason why the enchanter continues to cast Throtlling Grip?

View attachment 41754

View attachment 41755

Thanks.
Click to expand...
yes, there is, but i understand why the expectation not to, i will change that as the expectation and the FAQ says it respects usedot

Q. My enchanter is chain casting Breathing Dot?
A. The BreathingDot line is used as a nuke (still respects UseDot). At higher levels, the front-loaded damage is very strong.
 
Question: any chance that CWTN plugins can summon thier pet before thy decide to dish out Group buffs? More specifically for example shaman and enchanter would just do thier group buffs before even summoning thier pet whereas thier buffs are beneficial for pets? Thanks
 
We do check for pet first (in shaman), enchanter i can adjust to check summon sooner because it should
 
Last edited:
You must log in or register to reply here.
Plugin - MQ2Enchanter
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -