• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Bst

Plugin - MQ2Bst 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (103) Reviews (32) History Discussion Terms and conditions
cool - i wasn't sure if i could make a permanent xtarget file of sorts. Basically, powerleveling. One group getting xp, 10 ish toons helping out. So, all are me, all in guild, all on same PC, but not in raid or group. Is this a possible add on in the future? too many or xtargeting
 
mb4xy3 said:
cool - i wasn't sure if i could make a permanent xtarget file of sorts. Basically, powerleveling. One group getting xp, 10 ish toons helping out. So, all are me, all in guild, all on same PC, but not in raid or group. Is this a possible add on in the future? too many or xtargeting
Click to expand...
eq has built in xtarget sets.
so whatever you're doing and you want to populate with your xtarget set - just load that xtarget set
1614719852513.png
 
ya, but i owuld have to load a set, wait for the toon to buff while attacking on pulls, then realize when he is done, then load another set, do the same, etc. that just istn' feesible.
 
The_Klaw said:
On TLP (Riz) I noticed that Spirit Frenzy isn't used during the burn and Mend Companion doesn't seem to automatically get cast to quick heal our pets. Can we add Spirit Frenzy to the burn routine? And, add Mend Companion (or perhaps a toggle for it?) to the mending line but force it to cast (it only casts on the pet by default) if the pet's HP falls below 2500?
Click to expand...
If you would like, I could share with you the hot keys I use for my beast on live, when were doing 2 dif burns. Has the SF and mend comp in it, if so let me know its no prob at all
 
Hello, is there a explain or tutorial or something for the new function "SlickHow"? or that function not ready yet?
 
jchk said:
Hello, is there a explain or tutorial or something for the new function "SlickHow"? or that function not ready yet?
Click to expand...
from the patch notes

there was always "StickHow" with 1 entry that was defaulted.

now there are (10) stickhows 0-9, and a "stick selection" that allows you to specify which of those you want to use.

They are preloaded, the 0 is a regular default, 1 is left side, and 2 is right side - the rest are all just populated with the same regular default - you can change these to whatever stick you want if you have a custom stick you would like to use.

2-26-2021
CWTN Plugins - ALL
- StickHow has been replaced with StickSelection, with StickHow0 - StickHow9 options available.
-- AS ALWAYS the "stickhow" options are only for during an assist mode.
-- The default for "castery" classes has been updated to be more functional for castery classes
-- AS ALWAYS Do not use percent signs in the stickhow listings, unless you double percent it like: 55%%.
--- You will crash otherwise.
-- So if are currently using a custom StickHow you will want to ensure you go and update your StickHow0. Since the StickSelection is 0.
-- There are now (10), yes that many, StickHow0-StickHow9, options you can pre-define in your settings ini.
-- The UI window now has a dropdown for stickselection choice
-- you can also swap with slash command /zerk stickselection 2
Click to expand...
 
Sic said:
from the patch notes

there was always "StickHow" with 1 entry that was defaulted.

now there are (10) stickhows 0-9, and a "stick selection" that allows you to specify which of those you want to use.

They are preloaded, the 0 is a regular default, 1 is left side, and 2 is right side - the rest are all just populated with the same regular default - you can change these to whatever stick you want if you have a custom stick you would like to use.
Click to expand...
OH wow! got it. Awesome new choices we can play with. Thx Sic! Awesome work !
 
Raidien1 said:
On the tlp he doesn't sit to med in between combat. Possible to get a toggle to sit down in between combat.
Click to expand...
Sustained said:
No you were correct he was getting hit and pet was assisting @ 100% regardless camp range making pulling on him very difficult. I do not have pet hold as well as im on TLP
Click to expand...
Sustained, did you ever get a chance to see if this fixed your issue? I never heard anything from anyone about it.

1615068859172.png
 
I never got a chance to try this out i was attempting to help a friend with his plugin he started with bst and wanted to make him puller. im sure he still doesnt have pethold so i will let you know how it goes.
 
Hey guys so I really like Mq2 and redguides. But I recently bought the Mq2BST plugin and I am having trouble. What happens is I sent the mod to assist. When the MT of the group pulls mob the BST won't engage. His pet won't either. Then I try to reload the plugin and it crashes completely. If you guys can help it would be awesome.
 
Make sure your main assist has his role set as MA. Otherwise the BST won't engage.
 
Kk thanks. Knowhave another issue with my EQBC server when I go to run it from my Mq2 tab it wont open up?? When I run my logins I can still connect but I think that might cause issues..
 
Are you saying you don't see the window? Might try reloading your UI skin. But that's just a guess.
 
MA also has to be a melee, typically the tank will be a melee so that works, but just in case for other group makeups, the MA must be a melee, cause rogues wont assist an enchanter, for example...
 
Undefeated said:
Hey guys so I really like Mq2 and redguides. But I recently bought the Mq2BST plugin and I am having trouble. What happens is I sent the mod to assist. When the MT of the group pulls mob the BST won't engage. His pet won't either. Then I try to reload the plugin and it crashes completely. If you guys can help it would be awesome.
Click to expand...
sounds like either a: your MA isn't within melee distnace of the mob or b: you don't have your settings set appropriately.

is the mob coming within your campradius? (this is your red circle on your camp). if not adjust your campradius to whatever size you need/want
 
I had to make my SK the MT and the MA and it works. Question. I play my SK without running /mac kissassist and for some reason he always HT when it is up and I am in combat.
 
Undefeated said:
I had to make my SK the MT and the MA and it works. Question. I play my SK without running /mac kissassist and for some reason he always HT when it is up and I am in combat.
Click to expand...
for man/most automation situations its best to have the tank as MA and MT unless you're doing something *super specific*.

harmtouch - that is an mq2melee setting.

/melee load
/melee harmtouch=0
/melee save
 
Amarth said:
MA also has to be a melee, typically the tank will be a melee so that works, but just in case for other group makeups, the MA must be a melee, cause rogues wont assist an enchanter, for example...
Click to expand...
That's actually not true. They'll assist whomever is the MA of the group, at the designated life% set in that character's setup; for example, autoassistat 99, meaning we'll assist the MA when the target mob gets to 99% life.
 
BlankStare said:
That's actually not true. They'll assist whomever is the MA of the group, at the designated life% set in that character's setup; for example, autoassistat 99, meaning we'll assist the MA when the target mob gets to 99% life.
Click to expand...
currently with the cwtn plugins the MA needs to be a character that is within melee range of the mob (which i already mentioned above.) - so someone meleeing - currently you can't MA off a ranger or a non-meleeing wizard.
 
at level 45 my shaman is casting Spirit of Bih'Li and my bst is casting Spirit of the Wolf over it, it's a never ending battle till they run our of mana or run into something to kill lol. I'm hoping in a few levels one of em get's an upgrade and ends this debate. as a work around I pause all when I want to med up.
 
Rock said:
at level 45 my shaman is casting Spirit of Bih'Li and my bst is casting Spirit of the Wolf over it, it's a never ending battle till they run our of mana or run into something to kill lol. I'm hoping in a few levels one of em get's an upgrade and ends this debate. as a work around I pause all when I want to med up.
Click to expand...
turn one of them off for usesow - I would suggest turning off the bst since its sow and not bih'li (which has atk)

shm compares current movement speed before casting, but bst doesn't - i'll look at getting it updated
 
Last edited:
How does BandoSwap work/function and what is it's purpose other than the obvious? I am getting an error message "We don't have bandolier sets and can't use BandoSwap. So, I think it would be safe to assume that I should have Bando's set up so that this could be used in the event a particular is more susceptible to a particular type of weapon?? Thanks for your replies.
 
Medicman said:
How does BandoSwap work/function and what is it's purpose other than the obvious? I am getting an error message "We don't have bandolier sets and can't use BandoSwap. So, I think it would be safe to assume that I should have Bando's set up so that this could be used in the event a particular is more susceptible to a particular type of weapon?? Thanks for your replies.
Click to expand...
I explain bandoswap in both the FAQ and the Video.

You need a set that has a 2hander, and a set that is a mix of 1h/h2h, they don't have to be named anything special (as explained in the video). it will swap to your 2hander during Vindication or during DFury, and swap back to your 1h/h2h set outside.

for modern game I suggest the mnk/bst 2hander, and the mnk/bst rod/katar 1h/h2h combo


Q. What is BandoSwap?
A. BandoSwap will check your bandolier sets for a 1h or h2h set (or combo of those), and check if you have a 2h set (it goes top to bottom in the list, no need to name it specifically).
When you are outside of "Vindication" / "DFury" you will keep using your 1h/h2h set, but during Vindication and DFury you will swap to 2h set for that sweet extra damage.
 
I'm currently using MQ2BST on Rizlona and I've noticed that if the BST's warder dies while the BST is low on mana he stops fighting and won't melee or anything until he's got the mana back to summon the warder again. Even in Manual I can't get him to melee until he's summoned that warder. Wondering if I have a setting wrong or something.
 
Arazmus said:
I'm currently using MQ2BST on Rizlona and I've noticed that if the BST's warder dies while the BST is low on mana he stops fighting and won't melee or anything until he's got the mana back to summon the warder again. Even in Manual I can't get him to melee until he's summoned that warder. Wondering if I have a setting wrong or something.
Click to expand...
turn off combatsummonpet if you don't want him trying to do combatsummonpet stuff.
 
Just purchased this, cannot get it to load in game/

I tried the basic commands to get it to load I.E. /bst reload, /bst show etc etc and it tells me in my MQ window (the only window there) couldn't parse /bst reload, /bst show?

I have it watched and updated in my plugins in my red guides launcher with all my other CWTN plugins and they work. I am sure it is something dumb on my end that you all always help me get through.

Thank you and excited to give this plugin a go for sure
 
tigwelder76 said:
Just purchased this, cannot get it to load in game/

I tried the basic commands to get it to load I.E. /bst reload, /bst show etc etc and it tells me in my MQ window (the only window there) couldn't parse /bst reload, /bst show?

I have it watched and updated in my plugins in my red guides launcher with all my other CWTN plugins and they work. I am sure it is something dumb on my end that you all always help me get through.

Thank you and excited to give this plugin a go for sure
Click to expand...

Hi Tig, just need to /plugin mq2bst load first. You can't use any of the plugin commands until you've loaded the plugin.
 
why does my BL constantly try to switch spells from Ikatiar's blood to Ekron's chill?? am i missing something in settings
 
You must log in or register to reply here.
Plugin - MQ2Bst
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -