So after a few beers found that my extended target window wasn't updating after my last raid even though i put them back to auto. Had to select Auto Add Hater Targets, dont know how that got unchecked. I set everything back to normal and targets were showing up and then BST would start attacking again.
-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter Sic
- Start date
- Seller
- #682
yeah, shoulda probably mentioned "i don't have any mobs on xtarget"
Grainer
Member
- Joined
- Dec 15, 2020
- RedCents
- 40¢
Is there a command to not use dots and use nukes instead? It would make more sense when growl is active from Feralgia than spamming dots, the dots by the way drain mana very quickly. I realize I can use byos, just curious if there is a DoDots 0 command for mq2bst.
- Seller
- #684
you can adjust your dotmanamin
- Seller
- #687
there is no pet pulling and we don't plan on adding it at this time
- Seller
- #690
yeah that's definitely not a thing (as in this shouldn't be happening - we don't say "hey don't do stuff unless you have byos on") so something is wonky, but we'll figure it out
going to need much more information to try and figure out what's up with your toon.
can you pm me your mq2bst_dudebro.ini (your settings file from your release folder)
a screensnip of your /bst missing
what lvl is your bst?
what mode are you trying to use?
have you tried killing your pet? I've seen people get bugged out pet's when leveling without recreating them
are you sure you have your group main assist assigned in your group window so it knows who to assist?
Last edited:
Bst is 111 now. Has had issues since I tried loading it from 105ish-110
It will pull if I use pullertank but wont actually attack on any mode
Have killed pet/summoned new ones
Have unloaded and reloaded mq2bst (updated plugin from rg launcher)
Have tried different people as MA/tank/puller in group including myself and even solo not in a group
Will send ya the ini and missing spells
*actually will take a quick video and send
It will pull if I use pullertank but wont actually attack on any mode
Have killed pet/summoned new ones
Have unloaded and reloaded mq2bst (updated plugin from rg launcher)
Have tried different people as MA/tank/puller in group including myself and even solo not in a group
Will send ya the ini and missing spells
*actually will take a quick video and send
- Seller
- #692
Please send the information i request. just sending me a video isn't going to help.
so it does pull? but doesn't attack - this sounds like you need to adjust your settings - which is why i asked for you to send them
please send the ini and show /bst missing (tho missing is less important since it is doing stuff) - it sounds like you just don't have your campradius set appropriately.
Hello, L115 Beastlord on Test server seems to be acting wonky. During a fight he continually tries to swap between 2 spells and actually does nothing, no melee, no pet attack etc. This happens no matter the setting, Manual, Chase or Assist. haven't tried it on tank as I have a SK tank in group. Also wanted to mention that i've tried deleting the MQ2BST.dll and reloading it.
- Seller
- #696
thanks will take a look - if the mean time you can likely turn off combatsummonpet or turn off usemending
- Seller
- #697
@Wyntyr will be fix't next build.
thanks for the report - just turn off combatsummonpet or usemending for the time being.
I did some updating to combatsummonpet and i borked something up in the process.
sorry
thanks for the report - just turn off combatsummonpet or usemending for the time being.
I did some updating to combatsummonpet and i borked something up in the process.
sorry
- Seller
- #699
- Seller
- #701
yw Wyntry - sorry about that
- Seller
- #703
well if you have pet hold, we always pet hold your pet.
this is "Companion's Discipline"
if you don't have pet hold and you are getting hit - your pet is going to go and attack.
if you don't have pet hold and are getting hit i'd suggest spamming back pet back off button or maybe using huntertank mode to fight the mob where its at - or have someone else pull
- Seller
- #706
well then you're going to need to back him off and/or get that AA - we're not sending him in until eq ads hold/ghold pets auto attack if you get hit.
looks like companion's discipline is lvl 59 and SoL - so since bsts come with sol, you will have to wait 59 levels and 6 AAs until eq doesn't auto send your pet in
I'll see if there's anything we can do as far as backing it off - but i suspect that might introduce other issues elsewhere
- Seller
- #710
we med if we're in assist mode and we no longer have mobs on xtarget (or other modes like chase mode and tank sits down). tlp or otherwise
all the cwtn plugins function this way.
I am having an issue with Mq2bst being laggy... my whole team runs on CWTN plugins and they all work flawlessly except mq2bst. The framerates drop to 30fps when the plugin is running. the reason i know its the plugin is becuase as soon as i pause the plugin or unload it my frame rates shoot back up and i have zero lag. Im running an I9 with 32 gigs of ram and an RTX 3080 its def not a computer problem. im only using 30 percent of my cpu and 70 percent of my gpu. Any ideas as to why he screen is choppy/laggy? It's worth noting that he does everything hes suposed to to... it just bothers me that when im on his screen its not smooth.
- Seller
- #712
no, not a clue.
double check this isn't mq2autoclaim which will do that sometimes and you need to open your market place (doesn't sound like it if you pause or unload bst and its fine - but no idea)
Has anyone encountered this? If my BST dies during combat, once he is rezzed the plugin no longer seems to work. I can switch to manual and then just let him melee but tha's it. I have to log off then back in to get the plugin to run again. It is actually doing this with both Zerk and BST plugins.
- Seller
- #714
if you mean while fighting for that fight, it means your MA needs to clear their target so the toons re-aquire their MA's target to start fighting. it won't take a rez and then instantly start flying back into combat again without the MA giving them a fresh target. This is with all of the cwtn class plugins.
I have a friend I am trying to help get MQ2bst up and running. He has a brand new Asus gaming laptop with windows 10 on it. Whenever we start up MQ2bst on his laptop pause off, mode 1(assist), the BL sits and then does nothing. Set autoassistat 100, bring a mob into camp, it doesn't even target the mob. I do the same thing on my computer it works fine. I've uninstalled everything twice, still the same results on his laptop. He's not very technical, so I'm doing alot of this over zoom and screensharing. what kind of information is needed to help troubleshoo this problem?
Thanks,
Lugnut
Thanks,
Lugnut
- Seller
- #717
does he have mq2nav setup with meshes? it would kick him out of assist mode and tell him he needs meshes.
does he have his group's MA assigned in the group window?
what's your friends RG username i can reach out
Try posting in the thread for the specifik plugin and if you dont specify the problem I'm pretty sure it will be impossible to help you.