• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Bst

Plugin - MQ2Bst (2 Viewers) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (103) Reviews (33) History Discussion Terms and conditions
Hello,

Thank you for the plug in, its great! I have a Troll bst. My summoned pet is a basilisk and only 1.39 tall, but very bulky and long. Having petshrink on doesn't effect him because of his vertical adversity. I tried adding pet earing to downtime clicky but it nonstop spams shrink. I'm thinking, if I want him auto shrunk, that I might need to use an illusion. However, I was wondering if there is another solution for my low long buddy, as I prefer his current form.
 
JustaDad said:
Hello,

Thank you for the plug in, its great! I have a Troll bst. My summoned pet is a basilisk and only 1.39 tall, but very bulky and long. Having petshrink on doesn't effect him because of his vertical adversity. I tried adding pet earing to downtime clicky but it nonstop spams shrink. I'm thinking, if I want him auto shrunk, that I might need to use an illusion. However, I was wondering if there is another solution for my low long buddy, as I prefer his current form.
Click to expand...
<3 low long buddy <3 he's glorious

unfortunately, due to no standard for single/double-shrunk we only shrink to under 2.04

some pets actually ***grow*** when you shrink them

I'd recommend using brownie illusion or another that allows you to visibly see if they have weapons in hand or not
 
Sic said:
<3 low long buddy <3 he's glorious

unfortunately, due to no standard for single/double-shrunk we only shrink to under 2.04

some pets actually ***grow*** when you shrink them

I'd recommend using brownie illusion or another that allows you to visibly see if they have weapons in hand or not
Click to expand...
Thanks for the super fast reply! I think I'll just manually do it. The whole reason for making a troll was my LLB. Don't wanna sacrifice that for a manual click or 2.
 
Hello,

Not sure when this started, but for some reason my bst no longer casts dicho/dissi. I've tried toggling on and off the use lowest progressive setting and in both cases, he never casts the spell. This is something recent as I never had an issue with him casting it before. Not using BYOS and am in chase mode. Level 115 in ToV era.
 
doogie said:
Hello,

Not sure when this started, but for some reason my bst no longer casts dicho/dissi. I've tried toggling on and off the use lowest progressive setting and in both cases, he never casts the spell. This is something recent as I never had an issue with him casting it before. Not using BYOS and am in chase mode. Level 115 in ToV era.
Click to expand...
hrm i haven't seen that, i'll take a look
 
Sic said:
hrm i haven't seen that, i'll take a look
Click to expand...
hi Sic, I am having the same issue, no matter if lowestprogessive is checked or not, he and another also doesn’t seem to be wanting to use gba, ferocious, or savage rancor anymore also. Same as the person two posts up, I never use byos and am on chase mostly.
 
Kruuger said:
hi Sic, I am having the same issue, no matter if lowestprogessive is checked or not, he and another also doesn’t seem to be wanting to use gba, ferocious, or savage rancor anymore also. Same as the person two posts up, I never use byos and am on chase mostly.
Click to expand...
yarp, progressive spell will be fixed this morning, currently only gonna progressive spell during burn =p oops I'm not sure about the other things but i'll be building later today, chase has nothing to do with anything, nor does byos.

gba, fero and savage rancor are burn abilities with requirements if/when to use them, i'll take a peak but don't see at a quick glance there being an issue
 
Sic said:
yarp, progressive spell will be fixed this morning, currently only gonna progressive spell during burn =p oops I'm not sure about the other things but i'll be building later today, chase has nothing to do with anything, nor does byos.

gba, fero and savage rancor are burn abilities with requirements if/when to use them, i'll take a peak but don't see at a quick glance there being an issue
Click to expand...
Thanks boss
 
Sic said:
yarp, progressive spell will be fixed this morning, currently only gonna progressive spell during burn =p oops I'm not sure about the other things but i'll be building later today, chase has nothing to do with anything, nor does byos.

gba, fero and savage rancor are burn abilities with requirements if/when to use them, i'll take a peak but don't see at a quick glance there being an issue
Click to expand...
Thank you Sic! Appreciate your time and hard work creating and maintaining all of these awesome plugins!
 
Sic said:
Sic updated MQ2Bst with a new update entry:

03/11/2024



Read the rest of this update entry...
Click to expand...
hey boss, im still having issues not casting ecliptic, also seems to be never using ruuabris, is progressive linked to dotmanamin? or anything else? I had him grouped with another beast recently and im not sure if maybe that might have messed it up? he was perfect like a week ago, been turning off and on any ability i could think of could possibly have some sort of conflict.
 
Kruuger said:
hey boss, im still having issues not casting ecliptic, also seems to be never using ruuabris, is progressive linked to dotmanamin? or anything else? I had him grouped with another beast recently and im not sure if maybe that might have messed it up? he was perfect like a week ago, been turning off and on any ability i could think of could possibly have some sort of conflict.
Click to expand...
sorry about that, that's obnoxious (and no one mentioned it and i didn't notice)
simple typo made it fail :'( will rebuild this morning.

thanks for following up, i appreciate it
 
darkstardruid said:
I mean... sure but were saying the addon can't do some of its functions? If no shm is present bst focus would be nice.
Click to expand...
well, firstly, no, we can't assume that other classes are doing things we want them to do, eventually when actors get integrated, maybe we'll be able to leverage that - but no.

secondly, swapping to focus and then back leads me to believe there is something else happening - like maybe it wants to buff a pet, but the pet is doing the "let's spaz in and out of range" thing

the only time we go to memorize focus, is when we think we should be casting focus.

darkstardruid said:
View attachment 59553

Spells missing according to initialization of the plugin. Lvl 90.
Click to expand...
thanks - the only reason we memorize focus is to cast it, so unmemorizing to do something else is suspect - i'm betting it is a spazzed out pet
 
Sic said:
well, firstly, no, we can't assume that other classes are doing things we want them to do, eventually when actors get integrated, maybe we'll be able to leverage that - but no.

secondly, swapping to focus and then back leads me to believe there is something else happening - like maybe it wants to buff a pet, but the pet is doing the "let's spaz in and out of range" thing

the only time we go to memorize focus, is when we think we should be casting focus.


thanks - the only reason we memorize focus is to cast it, so unmemorizing to do something else is suspect - i'm betting it is a spazzed out pet
Click to expand...
If I see this behavior again I'll keep this in mind to check. Ty
 
What type 3 augs would you suggest for a 125 beastlord running the cwtn plugin? Hasn't needed to do much tanking yet
 
Kilroy03 said:
What type 3 augs would you suggest for a 125 beastlord running the cwtn plugin? Hasn't needed to do much tanking yet
Click to expand...
I would start with looking at the memmed spells / used spells / used aa's/discs and grab those.

Can also look at the info tab on the plugin window under spells/discs and see which ones are available / needed / high priority
 
was reading this thread just to see what bout the pluging for one of my fav classes is. A bit of advice form a Main bst. don't have the plugin use ecliptic fury. Have it use the level 101 Dichotomic fury instead. There is no good reason to every use any other spell in this line. All levels and rank give the same dps boost. the only thing that changes is the amount of hp/end/mana it regen. it cost you 6k more mana to cast the 116 one and the difference between the hp/end/mana regen just really not worth it.

​

 
strongbus said:
was reading this thread just to see what bout the pluging for one of my fav classes is. A bit of advice form a Main bst. don't have the plugin use ecliptic fury. Have it use the level 101 Dichotomic fury instead. There is no good reason to every use any other spell in this line. All levels and rank give the same dps boost. the only thing that changes is the amount of hp/end/mana it regen. it cost you 6k more mana to cast the 116 one and the difference between the hp/end/mana regen just really not worth it.

​

Click to expand...

👍
 
Took a MQ break for @ 6 weeks - Just went back to using it on my Beastlord.

Have a full LS raid geared BL - Tier 1/2/3.

Some issues I've immediately noticed:
Will burn regardless of if burn/burn always is toggled or not.
Randomly self targets and does...Nothing. If it were casting something, I'd understand...But he just sits there. It's done this pretty much every fight. Sometimes it assists back, most of the time it does not.

Didn't have these issues before my break so, trying to figure it out.
 
RubberBunny said:
Took a MQ break for @ 6 weeks - Just went back to using it on my Beastlord.

Have a full LS raid geared BL - Tier 1/2/3.

Some issues I've immediately noticed:
Will burn regardless of if burn/burn always is toggled or not.
Randomly self targets and does...Nothing. If it were casting something, I'd understand...But he just sits there. It's done this pretty much every fight. Sometimes it assists back, most of the time it does not.

Didn't have these issues before my break so, trying to figure it out.
Click to expand...
we don't burn without your burn conditions being met - burnalways, burnnow, burnallnamed, or your burncount being met. we just dont.

we don't randomly target and then do nothing --- BUT, it sounds like you're in manual mode, you target yourself for a buff, and then you don't reassist because you're in manual mode, so there's nothing to re-assist

you need to be in an assist mode (i'd suggest mode 2 for moving around and mode 1 for static camp) with a groupmain assist set - you need to have your assistat value where you want it, and your campradius a size that allows the mob to be inside it - default is 60 --- your MA also needs to be "up in the mob's shit" inside your camp (red circle on your map)

sounds like you are running some conflicting automation and/or don't have your settings setup correctly

please check out the "how to ask for help" and the rest of the info in the sticky

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
 
Sic said:
we don't burn without your burn conditions being met - burnalways, burnnow, burnallnamed, or your burncount being met. we just dont.

we don't randomly target and then do nothing --- BUT, it sounds like you're in manual mode, you target yourself for a buff, and then you don't reassist because you're in manual mode, so there's nothing to re-assist

you need to be in an assist mode (i'd suggest mode 2 for moving around and mode 1 for static camp) with a groupmain assist set - you need to have your assistat value where you want it, and your campradius a size that allows the mob to be inside it - default is 60 --- your MA also needs to be "up in the mob's shit" inside your camp (red circle on your map)

sounds like you are running some conflicting automation and/or don't have your settings setup correctly

please check out the "how to ask for help" and the rest of the info in the sticky

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
Click to expand...
I'll be more concise and better technically describe the issues I experienced.

BurnALLNamed and BurnAlways were and are, off.
My understanding was that if BurnAllNamed and BurnAlways were off - BurnCount would not equal the conditions for a burn - However, if it's independent, than that's the cause.

Was doing a small raid on Anniversary content - The BST was tabbed out as I was focused on the SK - In ASSIST mode and RaidMode - As well as manually, actually - The BST would randomly target himself.
Now, I use BYOSCustom because the spell lineup still doesn't allow for Ven Conjunction - Thus, I click it manually - So there was no buff on the bar, the character did not stop to memorize a spell, because the process would've completed - He just stood there, targeting himself.

I will test these parameters more this weekend and will have a more thorough answer ready.
 
RubberBunny said:
My understanding was that if BurnAllNamed and BurnAlways were off - BurnCount would not equal the conditions for a burn - However, if it's independent, than that's the cause.
Click to expand...
nah , there are 4 ways to meet burn conditions

burnallnamed
burnalways
burncount being met
executing a burnnow

RubberBunny said:
Was doing a small raid on Anniversary content - The BST was tabbed out as I was focused on the SK - In ASSIST mode and RaidMode - As well as manually, actually - The BST would randomly target himself.
Click to expand...
and assistmode with a RAIDMA designated in your raidwindow?

we don't randomly target ourself - we target ourself to do something should we need to - if you don't have a valid MA - in raidmode would require raidmode and raidassist set in the cwtn plugins and a raid assist set in eq raid window

RubberBunny said:
Now, I use BYOSCustom because the spell lineup still doesn't allow for Ven Conjunction - Thus, I click it manually - So there was no buff on the bar, the character did not stop to memorize a spell, because the process would've completed - He just stood there, targeting himself.
Click to expand...

you didn't turn on usealliance/forcealliance? turn those on we then put alliance in gem 13 (forcealliance will skip the group member check)
 
Currently running a beastlord at 95, but even with Slowall and Slownamed on it doesn't load any slow. The assigned spell in 'spells & discs' is 'Sha's Reprisal Rk. II' but doesn't seem to attempt to load it or use it in any way.
 
koredan said:
Currently running a beastlord at 95, but even with Slowall and Slownamed on it doesn't load any slow. The assigned spell in 'spells & discs' is 'Sha's Reprisal Rk. II' but doesn't seem to attempt to load it or use it in any way.
Click to expand...
Q. I am not memorizing slow?
A. Level 90 you get your first Maelstrom spell and you don't get Sha's Reprisal AA until 100, so you have a gap until you get that AA. You can BYOS or BYOS Custom if you want to manually memorize your slow spell until you get that AA.
 
Ahh yes, another case of not reading the FAQ. Thanks for the reply though. Great work on all that you do.
 
Hello :)

Some recent and not sure if there is an internal check. (which i believe there is)

However, re-read FAQs and lvl 115 bst doesnt play nice with lvl 120 beast and still gets into a buffing contest trying to override the lvl 120 spell.

Like i said recent and is mainly during different raids, ie: on Live and Test fyi

any insight would be great!
 
Grpsmashin said:
Hello :)

Some recent and not sure if there is an internal check. (which i believe there is)

However, re-read FAQs and lvl 115 bst doesnt play nice with lvl 120 beast and still gets into a buffing contest trying to override the lvl 120 spell.

Like i said recent and is mainly during different raids, ie: on Live and Test fyi

any insight would be great!
Click to expand...
unfortunately this is due to what eq tells mq about buffs stacking.

you should probably byos on your 115 until that situation doesn't exist
can't imagine your 115 is doing much on 120+ raids =p
 
You must log in or register to reply here.
Plugin - MQ2Bst
Next unread thread 🦁

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)
Back
Top
Cart

Cart

Total -