-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter Redbot
- Start date
without more information - it sounds like you're running MQ - and have mq2maps loaded with your map open with details ---
if you *actually* mean your inventory - no i can't think of any reason why redfetch would have anything to do with that. you might be thinking of MQ and not redfetch ---
These are most likely due to a bad install. If this happens, try the following:
open a powershell terminal, navigate to the directory that holds redfetch.exe (likely your Downloads folder) and type,
./redfetch.exe self restoreThat’s the best part
Just point redfetch to your old install if you want to keep that install.
Or make a new one and drag over your config and resources folder
No. Not settings (other than default)
Redfetch is just a patcher, so it patches from redguides and puts them where you tell them.
Almost exclusively settings files aren't overwritten, which is why you can drag over your config folder if you wanted to - but just pointing your redfetch to your current install location is totally ok too.
so ive come back after over a year and see this new redfetch thingy .. im playing on an old laptop that still has win 8.1 .. ya ya i know it sux but i only have 4gig ram to work with and it plays EQ fine 1 or 2 instances np ..
so i tried to download and install redfetch and go thru the config settings but then i get some error not sure what it is but thats as far as it goes .. ive got the redfetch icon on the screen and when i dbl click it it try's to load but then i get that fog horn error sound .. inside the redfetch window is a bunch of jarbled mess ..
im almost positive its because redfetch is not win 8.1 compatible ?? but confirmation would be nice..
this laptop is not upgradable .. so until i can get a cheap laptop with win 10 or 11.. im screwed on macroquest i guess..
I dont even see an error log in the redfetch directory
so i tried to download and install redfetch and go thru the config settings but then i get some error not sure what it is but thats as far as it goes .. ive got the redfetch icon on the screen and when i dbl click it it try's to load but then i get that fog horn error sound .. inside the redfetch window is a bunch of jarbled mess ..
im almost positive its because redfetch is not win 8.1 compatible ?? but confirmation would be nice..
this laptop is not upgradable .. so until i can get a cheap laptop with win 10 or 11.. im screwed on macroquest i guess..
I dont even see an error log in the redfetch directory
Unfortunately mq itself I don't think would support windows 8 (I know it doesn't support 7)so ive come back after over a year and see this new redfetch thingy .. im playing on an old laptop that still has win 8.1 .. ya ya i know it sux but i only have 4gig ram to work with and it plays EQ fine 1 or 2 instances np ..
so i tried to download and install redfetch and go thru the config settings but then i get some error not sure what it is but thats as far as it goes .. ive got the redfetch icon on the screen and when i dbl click it it try's to load but then i get that fog horn error sound .. inside the redfetch window is a bunch of jarbled mess ..
im almost positive its because redfetch is not win 8.1 compatible ?? but confirmation would be nice..
this laptop is not upgradable .. so until i can get a cheap laptop with win 10 or 11.. im screwed on macroquest i guess..
I dont even see an error log in the redfetch directory
So even aside redfetch to patch with all the goodies you might need to update/upgrade
- Joined
- Dec 1, 2020
- RedCents
- 1,337¢
Im not able to download this file REDFETCH, can you provide a working link please :-)
github.com
NO WORK, perhaps im missing something....
GitHub - RedGuides/redfetch: Fetch EverQuest software from the RedGuides API
Fetch EverQuest software from the RedGuides API. Contribute to RedGuides/redfetch development by creating an account on GitHub.
github.com
https://www.redguides.com/community/resources/redfetch.3177/download
Unless your level 2 expired?
Download button at the top of the resource
Unless your level 2 expired?
Download button at the top of the resource
- Joined
- Dec 1, 2020
- RedCents
- 1,337¢
- Joined
- Dec 1, 2020
- RedCents
- 1,337¢
Worked :-) !!!!!! Thanks
woot woot!
redguides launcher is deprecated (will not received future updates, and may have things that don't work).
redfetch is the new way to update redguides - and it has a bunch of function and features that are leaps and bounds better than rg launcher
Not sure why, but RedFetch isn't grabbing 100% of my resources when I update using the Easy Update Button. It has been missing MQ2Rogue on both of my computers the last couple updates. The update a single resource worked last time to manually update it.
I ran the Clear Download Cache and re-ran the easy update and it had the same issue.
Any advice?
Thanks
I ran the Clear Download Cache and re-ran the easy update and it had the same issue.
Any advice?
Thanks
I was installing Redfetch and it got to the part where it sets up the VM.
Windows rebooted in the middle of the process, and now when I try to run
the Redfetch installer it just closes instantly with no error.
I already rebooted, but the installer still won’t open.
Looks like the forced reboot left behind a corrupted VM or partial install.
Has anyone run into this before or know how to fully clean the leftover
files so the installer can run again?
Windows rebooted in the middle of the process, and now when I try to run
the Redfetch installer it just closes instantly with no error.
I already rebooted, but the installer still won’t open.
Looks like the forced reboot left behind a corrupted VM or partial install.
Has anyone run into this before or know how to fully clean the leftover
files so the installer can run again?
open a powershell terminal, navigate to the directory that holds redfetch.exe (likely your Downloads folder) and type,
./redfetch.exe self restore
you are not level 2
nah, it's just mad you're not level 2. I need to work on the ux for level 1 people some more.
Got ya a month though, give the big button another push
Thank you! Sorry, I did miss that bit. Appreciate it - Pushing now!
Edit: that worked. Is it just the compiling of MacroQuest that requires level 2, or is there more to it?
Hey my dude, we have entire areas of the site that are only* open to level 2 members, full of discussions, scripts, etc.
Thankfully, now that Red gave you a month, it should be pretty easy to maintain it, with a little bit of community involvement!
Check out
- Joined
- Jun 12, 2015
- RedCents
- 58,244¢
@Redbot HALP
Code:
---------------------------
redfetch
---------------------------
Tip: Press Ctrl+C to copy this error report.
ReadError: [SSL: SSLV3_ALERT_BAD_RECORD_MAC] sslv3 alert bad record mac (_ssl.c:2638)
Traceback (most recent call last):
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_transports\default.py", line 101, in map_httpcore_exceptions
yield
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_transports\default.py", line 250, in handle_request
resp = self._pool.handle_request(req)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\connection_pool.py", line 256, in handle_request
raise exc from None
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\connection_pool.py", line 236, in handle_request
response = connection.handle_request(
pool_request.request
)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\connection.py", line 103, in handle_request
return self._connection.handle_request(request)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\http11.py", line 136, in handle_request
raise exc
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\http11.py", line 106, in handle_request
) = self._receive_response_headers(**kwargs)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\http11.py", line 177, in _receive_response_headers
event = self._receive_event(timeout=timeout)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_sync\http11.py", line 217, in _receive_event
data = self._network_stream.read(
self.READ_NUM_BYTES, timeout=timeout
)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_backends\sync.py", line 126, in read
with map_exceptions(exc_map):
~~~~~~~~~~~~~~^^^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\cache\distributions\_13424265379977983397\python\Lib\contextlib.py", line 162, in __exit__
self.gen.throw(value)
~~~~~~~~~~~~~~^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpcore\_exceptions.py", line 14, in map_exceptions
raise to_exc(exc) from exc
httpcore.ReadError: [SSL: SSLV3_ALERT_BAD_RECORD_MAC] sslv3 alert bad record mac (_ssl.c:2638)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\redfetch\main.py", line 632, in main
run_tui()
~~~~~~~^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\redfetch\main.py", line 269, in run_tui
_initialize_auth()
~~~~~~~~~~~~~~~~^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\redfetch\main.py", line 59, in _initialize_auth
auth.authorize()
~~~~~~~~~~~~~~^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\redfetch\auth.py", line 280, in authorize
if refresh_token(client_id, client_secret, redirect_uri=redirect_uri):
~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\redfetch\auth.py", line 351, in refresh_token
response = httpx.post(TOKEN_ENDPOINT, headers=headers, data=payload, timeout=10.0)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_api.py", line 304, in post
return request(
"POST",
...<13 lines>...
trust_env=trust_env,
)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_api.py", line 109, in request
return client.request(
~~~~~~~~~~~~~~^
method=method,
^^^^^^^^^^^^^^
...<8 lines>...
follow_redirects=follow_redirects,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
)
^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_client.py", line 825, in request
return self.send(request, auth=auth, follow_redirects=follow_redirects)
~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_client.py", line 914, in send
response = self._send_handling_auth(
request,
...<2 lines>...
history=[],
)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_client.py", line 942, in _send_handling_auth
response = self._send_handling_redirects(
request,
follow_redirects=follow_redirects,
history=history,
)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_client.py", line 979, in _send_handling_redirects
response = self._send_single_request(request)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_client.py", line 1014, in _send_single_request
response = transport.handle_request(request)
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_transports\default.py", line 249, in handle_request
with map_httpcore_exceptions():
~~~~~~~~~~~~~~~~~~~~~~~^^
File "C:\Users\Rene\AppData\Local\pyapp\cache\distributions\_13424265379977983397\python\Lib\contextlib.py", line 162, in __exit__
self.gen.throw(value)
~~~~~~~~~~~~~~^^^^^^^
File "C:\Users\Rene\AppData\Local\pyapp\data\redfetch\13424265379977983397\0.7.0\Lib\site-packages\httpx\_transports\default.py", line 118, in map_httpcore_exceptions
raise mapped_exc(message) from exc
httpx.ReadError: [SSL: SSLV3_ALERT_BAD_RECORD_MAC] sslv3 alert bad record mac (_ssl.c:2638)
---------------------------
OK
---------------------------couple things:
- you're post in redfetch post but asking about MQ issues
Build: MacroQuest (Elevated) this means eq is getting launched as admin - if you're running redfetch as admin - dont. if you're just running mq as admin - also dont
it also says your MQ is from january, which seems like a problem
You just need to set redfetch to emu.
Make sure you've configured Redfetch to point to your emu mq directory... if you don't have one, create one for all the emu mq stuff to go to. In the event that live is back in business, you don't want to risk messing up the live mq directory.
You can launch emu MQ from here in Redfetch...
Make sure you've configured Redfetch to point to your emu mq directory... if you don't have one, create one for all the emu mq stuff to go to. In the event that live is back in business, you don't want to risk messing up the live mq directory.
You can launch emu MQ from here in Redfetch...
I think I have a minor problem with Redfetch in that, for historic reasons, I have 2 entries for licenses for MQ2Druid. One is expired and one is current.
I don't see a way to delete the expired one but Redfetch seems to be checking licenses and acting differently now - when it sees it, it doesn't download updates to MQ2Druid like it used to.
I can get around it by manually downloading MQ2Druid but it would be nice to have Redfetch see the current license and act on it (or, if we can delete the outdated, expired license so that it doesn't case a problem, that would work too!)
Small thing and probably a rare case, I know ... sorry!
I don't see a way to delete the expired one but Redfetch seems to be checking licenses and acting differently now - when it sees it, it doesn't download updates to MQ2Druid like it used to.
I can get around it by manually downloading MQ2Druid but it would be nice to have Redfetch see the current license and act on it (or, if we can delete the outdated, expired license so that it doesn't case a problem, that would work too!)
Small thing and probably a rare case, I know ... sorry!