Plugin - MQ2Shaman (1 Viewer) 3.1.52471.15

[durango773]

Make sure your background FPS is set high enough (recommend using built in MQ frame limiter), also.. some servers are piles of poop lag, and while the plugin asked to do things (close book, stand up) server can sometimes be napping.

 

[Sic]

Hey Friends! I've been using CWTN SHM for several months now. I also use the Necro, Zerker, Monk, Eskay, and mage. I only seem to have this issue on the Shm. His spell book keeps getting stuck open, like it's trying to mem, but no purple line. I only run the game while I'm in my office working on other things for my biz, but it'll cause the tank to drop and the group to wipe. I changed the setting for "Stuck Spell Gems" in the INI thinking that may fix it but it still happens every 15 mins to 3 hrs intermittently. Any ideas?

Did you check the FAQ and do those things?

The only way that can happen is if you are getting starved for background resources (like not using frame limiter).

Can also turn on use melee

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<


Check for stick gems doesn't have anything to do with spell book.

 

[RebelHeartActual]

Did you check the FAQ and do those things?

The only way that can happen is if you are getting starved for background resources (like not using frame limiter).

Can also turn on use melee

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<


Check for stick gems doesn't have anything to do with spell book.

Still learning my way around this elaborate maze, Thanks for not smacking me too hard.

Frame limiter seemed to fix it! Thanks guys!

 

[RebelHeartActual]

OK, i lied. Tried FPS at 60 in fore and background, still running into book issues. Tried it again at 80 and with 9 instances open it crashed one, still had issues. Use melee makes him liiks silly bashing mobs with a big dumb stick. Any other suggestions?

 

[BlueBug]

Make sure your background FPS is set high enough (recommend using built in MQ frame limiter), also.. some servers are piles of poop lag, and while the plugin asked to do things (close book, stand up) server can sometimes be napping.

I've run into the same issue only once. So not much of an issue really.
But curious what you think I should run FG and BG FPS at? Presently running 25FPS in BG and 120FPS in FG on an AMD 5900x and 3090ti. With 6 toons running at about 7% CPU usage each.
Is BG of 25 decent?

Thanks!

BB~

 

[durango773]

I run quite a few shaman, never had a issue. Did you watch Sic's vid on Framelimiter, and set it up to a baseline ok (might take little tweaks after)?

 

[BlueBug]

I run quite a few shaman, never had a issue. Did you watch Sic's vid on Framelimiter, and set it up to a baseline ok (might take little tweaks after)?

I did way back, but watched his videos like I did Breaking Bad- In a binge.
Don't want to hijack this thread so will move over to his video thread to ask additional questions.

Thanks guys!

BB~

 

[Sic]

OK, i lied. Tried FPS at 60 in fore and background, still running into book issues. Tried it again at 80 and with 9 instances open it crashed one, still had issues. Use melee makes him liiks silly bashing mobs with a big dumb stick. Any other suggestions?

I've run into the same issue only once. So not much of an issue really.
But curious what you think I should run FG and BG FPS at? Presently running 25FPS in BG and 120FPS in FG on an AMD 5900x and 3090ti. With 6 toons running at about 7% CPU usage each.
Is BG of 25 decent?

Thanks!

BB~

This isn't plugin specific. It is client specific.

If your client is starved for cpu resources this can happen. Doesn't matter if you've got a great PC. If your CPU is pegged out then it can happen. If you have things like file, scanning or file syncing happening consuming resources away from macroquest being able to process stuff in the background, then also you're starving your clients.

If your background FPS is set too low, we actually adjust it. But if you're using frame limiter, it shouldn't matter.

Now keep in mind with all of the new UI updates that ever request is making a bunch of people are having very significant performance problems. Which could exacerbate this particular scenario.

My suggestions are exactly the same as the first suggestions that I made which are make sure you have frame limiter setup, consider turning on use melee which you should anyway with a shaman in my personal opinion, You can also revert your UI to the non-new UI pieces and see if that impacts your performance

 

[RebelHeartActual]

This isn't plugin specific. It is client specific.

If your client is starved for cpu resources this can happen. Doesn't matter if you've got a great PC. If your CPU is pegged out then it can happen. If you have things like file, scanning or file syncing happening consuming resources away from macroquest being able to process stuff in the background, then also you're starving your clients.

If your background FPS is set too low, we actually adjust it. But if you're using frame limiter, it shouldn't matter.

Now keep in mind with all of the new UI updates that ever request is making a bunch of people are having very significant performance problems. Which could exacerbate this particular scenario.

My suggestions are exactly the same as the first suggestions that I made which are make sure you have frame limiter setup, consider turning on use melee which you should anyway with a shaman in my personal opinion, You can also revert your UI to the non-new UI pieces and see if that impacts your performance

Okay, so use Melee and Wack mobs? That helps because it forces the SB closed?

 

[Sic]

Okay, so use Melee and Wack mobs? That helps because it forces the SB closed?

Yep.

Even if your client is starved in the background, forcing your toon to stand and fight the mob closes your spellbook

 

[Boring]

Not sure if this is just me or?

Made a new shammy. Below 106, I guess you only have 12 spell gems you can mem. After 106, you can have 13. Dinged 106 and rejoiced when I got my 13th spell gem.

Shammy won't mem anything in the 13th gem spot. I do not have BYOS running, I can unmem that spell spot and MQ2 shaman won't mem anything into that spot. I tried Loadout DPS, Loadout Heal. Nothing. I stopped MQ2Shaman and restarted it. I camped the toon out and relogged in. Still won't use the 13th spot. I can manually mem anything into there and it is not used. Any ideas?

Shammy is doing everything else correct, it seems. Healing, dotting, buffing. Just won't use the 13th spell gem slot.

Edited to add: If I un-mem any of the other gem spots, the program immediately remems a spell into that spot (as I would expect).

 

[ChatWithThisName]

Not sure if this is just me or?

Made a new shammy. Below 106, I guess you only have 12 spell gems you can mem. After 106, you can have 13. Dinged 106 and rejoiced when I got my 13th spell gem.

Shammy won't mem anything in the 13th gem spot. I do not have BYOS running, I can unmem that spell spot and MQ2 shaman won't mem anything into that spot. I tried Loadout DPS, Loadout Heal. Nothing. I stopped MQ2Shaman and restarted it. I camped the toon out and relogged in. Still won't use the 13th spot. I can manually mem anything into there and it is not used. Any ideas?

Shammy is doing everything else correct, it seems. Healing, dotting, buffing. Just won't use the 13th spell gem slot.

Edited to add: If I un-mem any of the other gem spots, the program immediately remems a spell into that spot (as I would expect).

Alliance (starts at 103 with Ancient Alliance) if usealliance
or
Chaotic (starts at level 104 with Chaotic Venom) if you have it.

Check /shm missing
if you're missing things, you should get them, so the plugin can use them.

 

[Sic]

Not sure if this is just me or?

Made a new shammy. Below 106, I guess you only have 12 spell gems you can mem. After 106, you can have 13. Dinged 106 and rejoiced when I got my 13th spell gem.

Shammy won't mem anything in the 13th gem spot. I do not have BYOS running, I can unmem that spell spot and MQ2 shaman won't mem anything into that spot. I tried Loadout DPS, Loadout Heal. Nothing. I stopped MQ2Shaman and restarted it. I camped the toon out and relogged in. Still won't use the 13th spot. I can manually mem anything into there and it is not used. Any ideas?

Shammy is doing everything else correct, it seems. Healing, dotting, buffing. Just won't use the 13th spell gem slot.

Edited to add: If I un-mem any of the other gem spots, the program immediately remems a spell into that spot (as I would expect).

Yep, as chat said

 

[Boring]

Ty sirs!

 

[Vrakenor]

Just started a new group and got MQ2Shaman for one of my toons. Only level 23 right now but have developed a problem with her. I have a higher level DRU to give this group buffs and one of them is Skin like Nature. Well the SHM wants to buff Inner Fire and it conflicts with Skin. So the SHM casts Inner Fire over and over again.

Anyway to make her stop doing that? I tried unloading the plugin and re loading it, no help there. Tried logging out and back and still does it. Any help would be much appreciated. Thanks.

Vrak

 

[Sic]

Just started a new group and got MQ2Shaman for one of my toons. Only level 23 right now but have developed a problem with her. I have a higher level DRU to give this group buffs and one of them is Skin like Nature. Well the SHM wants to buff Inner Fire and it conflicts with Skin. So the SHM casts Inner Fire over and over again.

Anyway to make her stop doing that? I tried unloading the plugin and re loading it, no help there. Tried logging out and back and still does it. Any help would be much appreciated. Thanks.

Vrak

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

yep, block any spell you don't want. Check the FAQ for info

 

[Vrakenor]

Thanks Sic, I forgot about the blocked spell thingie. Sheesh so much to remember for this game.

Vrak

 

[Sic]

Thanks Sic, I forgot about the blocked spell thingie. Sheesh so much to remember for this game.

Vrak

Yah, game been around for so long, lots of ins and outs

 

[ChatWithThisName]

I had honestly hoped that making it so you can just block spells you don't want would make it easy to remember. Don't want a spell? Just block it, same way you would with a merc, or if you have that one ranger that likes to cast SoE on the group when you don't like to levitate, you just block the thing you don't want.

 

[Vrakenor]

I hear ya Chat, I just had a brain fart is all. Oh btw I have had to do that for 4 more spells lol, I guess that's what happens when you have a BST and SHM in your group. I keep saying getting old sucks. Can't even remember my wife's name sometimes...oh wait is that a bad thing?

Vrak

 

[Sic]

I hear ya Chat, I just had a brain fart is all. Oh btw I have had to do that for 4 more spells lol, I guess that's what happens when you have a BST and SHM in your group. I keep saying getting old sucks. Can't even remember my wife's name sometimes...oh wait is that a bad thing?

Vrak

It only happens at low/mid levels, not so much at all in current era game.

 

[ChatWithThisName]

It only happens at low/mid levels, not so much at all in current era game.

Yeah late game you can remember your wife's name in my experience. The grind sucks you in.

 

[Twinkeltoes]

Is it possible to get rezing classes like Shm/Clr to rez out of group after a toon has been called? My scenario - Tank group with a dps group outside it someone in dps group dies and a healer shaman or druid w/e calls the corpse on the extended target. Toon is called but corpse is still there with the toon "live" on extended target. So the rezing classes Clr/Shm have a live toon on extended target and don't see the corpse. The tank sees it has a corpse nearby and won't run.

 

[Sic]

Is it possible to get rezing classes like Shm/Clr to rez out of group after a toon has been called? My scenario - Tank group with a dps group outside it someone in dps group dies and a healer shaman or druid w/e calls the corpse on the extended target. Toon is called but corpse is still there with the toon "live" on extended target. So the rezing classes Clr/Shm have a live toon on extended target and don't see the corpse. The tank sees it has a corpse nearby and won't run.

Hrm, I think I understand what you're saying. I'll take a look

 

[Dragonslayer]

A new effect right after logging in at GL and activating MQ2Shaman:


Could not pause mq2Shaman clicking at the "logo" as usuall would be possible, clould not camp, as cast attemts would interrupt camp.
Finally had to close task with taskmanager.
After relaunching eq on shaman effect was gone.
No other automation where running as far as I know.

 

[Sic]

A new effect right after logging in at GL and activating MQ2Shaman:
View attachment 49439

Could not pause mq2Shaman clicking at the "logo" as usuall would be possible, clould not camp, as cast attemts would interrupt camp.
Finally had to close task with taskmanager.
After relaunching eq on shaman effect was gone.
No other automation where running as far as I know.

What spell? Can you show me the mq2shaman window, be because unless meleeing your combat dummy in your Guild Hall, we're not casting detrimentals, and not casting any in the lobby/pok

 

[durango773]

inb4 afk nuke..

 

[Dragonslayer]

Happened just once. When logging into gl all my mq2xxx are paused. Once I saw a suggestion how to modify the setup to automatically pause all mq2xxx when entering gl. I used this to pause them all always at gl. At the moment I clicked on the mq2shaman to activate it to get the buffing done, the spam started and I found no way to stop it but killing the eq task.
The spam was so fast, I could not see the cast-window nor recognize elsewhere which spell was casting.
Felt a little stressd at the very moment, as I didn’t want anyone to recognize the unusual behavior of the char.
So after clicking once and after some moments another time onto the logo where usually I pause mq2shaman I attemted /camp desktop unsucessfully and after that Ctrl-alt-del Taskmanager - and stopped the eq-task.
I did not took the time, to really understand what was happening or how to fetch further possibly useful informations.
As it started at the moment I unpaused mq2shaman I presumed it was somehow related to it, without beeing able to tell if it was really the case.

As it happened only this one time and never before nor after, I presume there must have been some incomplete loading of whatever causing this one time malfunction. I can’t recreate it, so I cannot deliver additional information. As it happened only once, I don’t consider it an issue.
Likely it was just something with my pc which somehow hindered mq to work propper this one time.
At this time I logged in my bard and my shaman contemporary as usual at this time of day. The bard didn’t show any unusal behavior and after restarting the shaman he did fine as well for the rest of the evening.

 

[eqsubi15]

While MQ2Shaman is paused, I still see my shaman casting "Wintry Gift", "Ancient Bargain", "Zrelik's Recourse", "Composite Roar", and "Spiritual Swell" and "Ennui"

Un-pausing and re-pausing the plugin doesn't help. Casting invis on myself doesn't work as he just breaks it and continues.

Looks like it might be caused by MQ2Twist.

 

[Sic]

While MQ2Shaman is paused, I still see my shaman casting "Wintry Gift", "Ancient Bargain", "Zrelik's Recourse", "Composite Roar", and "Spiritual Swell" and "Ennui"

Un-pausing and re-pausing the plugin doesn't help. Casting invis on myself doesn't work as he just breaks it and continues.

Looks like it might be caused by MQ2Twist.

We 100% do not do stuff while paused.

And if you don't see it saying so in the shaman window then it is not us.

Please don't make me add MQ2 twist to things added to be unloaded.

 

[Many_Whelps]

MQ2Twist also does not do stuff unless you tell it to. 100% you have something else running automation on top of mq2shaman.

 

[ChatWithThisName]

MQ2Twist also does not do stuff unless you tell it to. 100% you have something else running automation on top of mq2shaman.

Quite literally was typing pretty much that lol.

 

[Dragonslayer]

While MQ2Shaman is paused, I still see my shaman casting "Wintry Gift", "Ancient Bargain", "Zrelik's Recourse", "Composite Roar", and "Spiritual Swell" and "Ennui"

Un-pausing and re-pausing the plugin doesn't help. Casting invis on myself doesn't work as he just breaks it and continues.

Looks like it might be caused by MQ2Twist.

Times ago I used to "guide" my group from my Bard. Therefore, amongst others, I had a hotbutton to launch kissassist on all chars. In the meantime I changed my behavior and guide my group from the sk. The Hotbutton to launch KA for Al, dass on the bard I took away from Row 1 of the hotbutton-bar and move it to row 2, where I even forgot it. Further I got used to the benefit of several MQ2 Xxx-plugin.
Not long time ago I noticed the Shaman was doing stuff, while I paused MQ2shaman.
It took a while until I understood, that I accidentally activated KA on the Shaman via the old hotbutton on the bard, because the hotbar has been at row 2 instead on row 1.

Could it be, that accidentally KA has been activated on your shm without intentions and without noticing it?

 

[eqsubi15]

Times ago I used to "guide" my group from my Bard. Therefore, amongst others, I had a hotbutton to launch kissassist on all chars. In the meantime I changed my behavior and guide my group from the sk. The Hotbutton to launch KA for Al, dass on the bard I took away from Row 1 of the hotbutton-bar and move it to row 2, where I even forgot it. Further I got used to the benefit of several MQ2 Xxx-plugin.
Not long time ago I noticed the Shaman was doing stuff, while I paused MQ2shaman.
It took a while until I understood, that I accidentally activated KA on the Shaman via the old hotbutton on the bard, because the hotbar has been at row 2 instead on row 1.

Could it be, that accidentally KA has been activated on your shm without intentions and without noticing it?

I think cause my bard is on the same account, when I logged off the bard and switched to the shaman, maybe twist was still active?

 

[Mogley]

While MQ2Shaman is paused, I still see my shaman casting "Wintry Gift", "Ancient Bargain", "Zrelik's Recourse", "Composite Roar", and "Spiritual Swell" and "Ennui"

Un-pausing and re-pausing the plugin doesn't help. Casting invis on myself doesn't work as he just breaks it and continues.

Looks like it might be caused by MQ2Twist.

I use MQShaman all the time and when on pause he never casts anything. I use pause usually when an unfortunate death has occured so I put him on pause and sit him down. I use it on all my tunes that I play, Sk, Cleri, Chanter,Rogue and Bst. Never had a problem like that with any of them. You have something else running in the background

 

[Sic]

I use MQShaman all the time and when on pause he never casts anything. I use pause usually when an unfortunate death has occured so I put him on pause and sit him down. I use it on all my tunes that I play, Sk, Cleri, Chanter,Rogue and Bst. Never had a problem like that with any of them. You have something else running in the background

Because we don't. It isn't a mystery or up for debate, tho I appreciate the "+1 to it working as it should"

It has been determined to be mq2twist running.

 

[learfool]

I am hoping a moderator can help me. New to the CWTN Class Plugins. On EMU Project Lazarus. Have RedGuides Very Vanilla. Have paid for MQ2Shaman, MQ2War, MQ2Monk, MQ2Rogue, MQ2Cleric. Have used "/plugin mq2shaman load" to try to load (and the same for the other classes) and I get the error "plugin 'mq2shaman' could not be loaded: loadlibrary failed with error 0x0000c1: %1 is not a valid win32 application." I have read on other posts that you state that the error is because I am out of date and need to patch. I used RG Loader to 'reinstall' veryvanilla... but I did not see a way to patch. What am I missing?

 

[Amarth]

cwtn plugins do not work on emu iirc/afaik at the moment. sic has a post shortly, I'm sure.

 

[ABDon]

I am hoping a moderator can help me. New to the CWTN Class Plugins. On EMU Project Lazarus. Have RedGuides Very Vanilla. Have paid for MQ2Shaman, MQ2War, MQ2Monk, MQ2Rogue, MQ2Cleric. Have used "/plugin mq2shaman load" to try to load (and the same for the other classes) and I get the error "plugin 'mq2shaman' could not be loaded: loadlibrary failed with error 0x0000c1: %1 is not a valid win32 application." I have read on other posts that you state that the error is because I am out of date and need to patch. I used RG Loader to 'reinstall' veryvanilla... but I did not see a way to patch. What am I missing?

https://www.redguides.com/community/threads/cwtn-plugins-mq-emu.83633/

 

[learfool]

So this video was posted Oct 1, 2022 and he was using CWTN Plugins in the Video; then, on the forum post linked above Sic promised to release CWTN for EMU eventually.... was there a patch or update at that time that broke things? In other words, how was it working in this video and then not working now?