Combat Assist MQ2Shaman 2446

Basic:
/shm help - shows the help menu
/shm show - Shows the CWTN UI window
/shm hide - Hides the CWTN UI window
/shm toggleui - Toggles visibility of the CWTN UI Window
/shm reload - updates the skills/abilities/discs, updates clickies from the INI etc.
/shm ShowSettings - Will output all the settings and their current values (IE: On/Off/true/false/their number value.
/shm missing - Shows what spells/tomes/abilities you are missing
/shm pause true/false/on/off/0/1 - Pauses the plugin from doing anything

/shm mode Manual|Assist|Chase|Vorpal 0|1|2|3|4|5|6|7|8
Mode 0 - Manual --- Manual
Mode 1 - Assist --- assist your MA and returns to camp
Mode 2 - ChaseAssist --- chasses and assists your MA
Mode 3 - Vorpal Mode (Assist but no camp or chase) Mode 3 -- THIS IS NOT A TANKING MODE)
Mode 4 - Tank --- tank stuff
Mode 5 - PullerTank --- pull and then tank
Mode 6 - Puller Assist --- pull and then assist MA
Mode 7 - SicTank Mode --- sets a camp, and does tank stuff, but doesn't return/sit down
Mode 8 - Hunter Tank mode --- runs around and kills stuff

Raid Mode:
/shm RaidMode true/false/on/off/0/1 - Sets if you want to use the Raid Assist instead of the Main Assist for getting valid targets.
/shm RaidAssistNum 1-3|Name - Sets if you should use Raid Assist 1, 2, or 3 or person by name when in RaidMode. This person must be assigned raid assist in your everquest raid window.

Pulling & Camp Related:
/shm CampRadius ## - Sets the campradius to the value provided. If no value is provided it outputs the current value.
/shm DisablePullAbility on/off/true/false/0/1 - allows you to disable the assigned pull ability
/shm Radius ## - This is your pull radius
/shm zRadius ## - This is your vertical pull radius
/shm zHigh ## - This is your vertical pull radius above you
/shm zLow ## - This is your vertical pull radius below you
/shm CampOverlapBuffer - is the distance out of Camp to help group members (assigned puller excluded).
/shm DoCampfire - Turns on dropping a campfire
/shm CampfireDistance ## - Create a new campfire if campfire is more than this distance from camp.
/shm Ignore - adds your target to the pullignores.ini file in your release folder - will skip this mob in the pull routine.
/shm Unignore - removes your target or typed name from your pullignores.ini file in your release folder.
/shm ShowIgnore - Outputs a list of NPC's being ignored. May show the previous zone if you haven't gone into puller mode in your current zone.
/shm GroupWatch 0|1|2|3|4 - Everyone, Healer, CC&Healer, Self, Cleric Only
/shm HpMedStart # - percentage of health you want to start waiting at.
/shm HpMedEnd # - percentage of health you want to stop waiting at.
/shm ManaMedStart # - percentage of mana you want to start waiting at.
/shm ManaMedEnd # - percentage of mana you want to stop waiting at.
/shm LevelMin # - Where # is the lowest level NPC you want to pull.
/shm LevelMax # - Where # is the maximum level NPC you want to pull.
/shm PullArc # - Sets an arc in the direction of your camp heading to the degress provided. Shows the Arc on the map displaying that area.
/shm GoToCamp - runs back to your camp (like if you were in sictank mode)
/shm debugpull on once - this will do 1 cycle of all the mobs and tell you why it isn't pulling mob by mob. This will notify you if you have no nav path, or out of zradius, or regular radius, or on ignore, etc.
/shm debugduringpull on - this will tell you what is happening as you're pulling.

General:
/shm AutoAssistAt ## - Sets the autoassistat value to the number provided. If no number is provided it tells you what the current value is.
/shm AutoDismount true/false/on/off/0/1 - Automatically dismount from your horse.
/shm AutoRemoveInvul true/false/on/off/0/1 - Automatically remove "Touch of the Divine" and similar.
/shm AutoStandOnFeign true/false/on/off/0/1 - Sets if you want the plugin to automatically stand if you are Feigning.
/shm UseAoE true/false/on/off/0/1 - Sets UseAoE to the provided value.
/shm AOECount ## - Use AoE at or above this number of mobs on XTarget.
/shm BeepOnNamed true/false/on/off/0/1 - Beeps on named (when in a tank mode).
/shm BurnCount ## - Uses Burn at or above this number of mobs on XTarget.
/shm BurnAllNamed true/false/on/off/0/1 - Sets using BurnAllNamed to the provided value.
/shm BurnAlways true/false/on/off/0/1 - Sets if you should always burn if a burn is up.
/shm BurnNow - will force a burn.
/shm ChaseDistance ## - the distance at which you would like to move to your MA.
/shm StopBurnNow - will force stop "burn now".
/shm ForceAlliance true/false/on/off/0/1 - Force the plugin to use the character's allianace
/shm UseAlliance true/false/on/off/0/1 - Sets if you should use Alliance or not.
/shm UseCures true/false/on/off/0/1 - Use cure spells/items/abilities.
/shm UpdateWinTitle true/false/on/off/0/1 - Sets if you want your EQ Window Title to get updated by the plugin
/shm StickSelection 0-9 - changes what "Stick Selection" you want to use for assist modes.
/shm SwitchWithMA true/false/on/off/0/1 - You can not turn this off on the caster classes.
/shm UseStick true/false/on/off/0/1 - Sets if you want the plugin to use MQ2MoveUtils to stick to a mob for combat (MQ2Nav will not go behind a mob)
/shm UseSwimFix true/false/on/off/0/1 - Will swim down to a mob to engage
/shm UseGlyph true/false/on/off/0/1 - Sets if you want to use the Glyph of Destruction line of Glyph's during Primary Burns

Clickies:
> See AddClicky Info <

Class Specific:

Loadout:
(loadout change your spell loadout, not behavior)
/shm loadout 0, 1, 2 - healing, hybrid, dps
/shm BYOS - check the byos/byos custom video in the sticky
/shm CheckForStuckGems true/false/on/off/0/1 - Sets if you want to try and "unstick" your spell gems - this will happen in every mode other than manual, and we use the Companion's Aegis AA.
/shm MemCureAll true/false/on/off/0/1 - Will memorize your "Cure All" line
/shm ShmEpic 0/1/2 - When to use epic - 0, 1, 2 for never, burn only, combat.
/shm SummonFoodDrink true/false/on/off/0/1 - Will summon food (useful for low lvl etc)
/shm UseAncestralAid true/false/on/off/0/1 - Use Ancestral Aid
/shm UseAttentiveSpirit true/false/on/off/0/1 - Use "Spirit" line of buffs
/shm UseAvatar true/false/on/off/0/1 - Use Avatar (you only do this 85 and below)
/shm UseCheetah true/false/on/off/0/1 - Use Communion of Cheetah AA
/shm UseCanniSpell true/false/on/off/0/1 - Memorize (for non byos) and use Cannibalize Spell line
/shm UseDot true/false/on/off/0/1 - Use Dots
/shm UseFocus true/false/on/off/0/1 - Use Focus Lines
/shm UseGroupShrink true/false/on/off/0/1 - Use Group Shrink AA and Shrink spells to shrink group
/shm UseGrowth true/false/on/off/0/1 - Use Growth line
/shm UseHaste true/false/on/off/0/1 - Usage of lower lvl haste (not implimented yet)
/shm UseNuke true/false/on/off/0/1 - Turn off nukes
/shm UseMalo true/false/on/off/0/1 - Use Malo AA (or spell)
/shm UseMaloAoE true/false/on/off/0/1 - Wind of Malaise AA
/shm UsePet true/false/on/off/0/1 - Use your pet
/shm UsePreincarnation true/false/on/off/0/1 - Use Preincarnation Spell AA
/shm UseRegen true/false/on/off/0/1 - Use Regen line
/shm UseResponsiveSpirit true/false/on/off/0/1 - Use Responsive Spirit
/shm UseRez true/false/on/off/0/1 - Rezzes
/shm UseRezCall true/false/on/off/0/1 - Uses the "Call of the Wild" AA during the rez routine while in combat.
/shm UseRezStick true/false/on/off/0/1 - uses Staff of the Forbidden Rites
/shm UseSlow true/false/on/off/0/1 - Uses Slow
/shm UseSlowAoE true/false/on/off/0/1 - Uses SlowAoE AA
/shm UseSow true/false/on/off/0/1 - Uses SoW spell line / lupine spirit AA
/shm UseSpiritCall true/false/on/off/0/1 - Use Spirit Call AA during burn (swarm pet)
/shm UseSquall true/false/on/off/0/1 - Use Squall
/shm UseVisionaryUnity true/false/on/off/0/1 - Use Visionary's Unity AA (chance to trigger swarm pets)
/shm UseXTargetBuffing true/false/on/off/0/1 - Sets if you want to do XTarget Buffing (do not need to specify which slot)
/shm UseXTargetHealing true/false/on/off/0/1 - Sets if you want to do XTarget Healing (do not need to specify which slot)

/shm CanniAAMana # - the mana value you want to use your canni AA at
/shm CanniSpellMana # - the mana value you want to use your canni spell at
/shm DotManaMin # - the miminum mana value you have before using dots
/shm DotHp ## - Mob health to stop dotting at
/shm DotHPNamed ## - Named health to stop dotting at
/shm MendingMA # - the health value of MA you want to use the mending line
/shm MendingNotMA # - the health value of Non-MAs you want to use the mending line
/shm NukeManaMin # - the minimum mana value you have before nuking
/shm RecklessMA # - the health value of MA you want to use the Reckless line at
/shm RecklessNotMA # - the health value of Non-MAs you want to use the Reckless line at
/shm STHoTMA # - the health value of MA you want to use STHoTs at
/shm STHoTNotMA # - the health value of Non-MAs you want to use STHoTs at

Reporting:
/shm ReportCA true/false/on/off/0/1 - Reports CA usage
/shm ReportAbility true/false/on/off/0/1 - Reports Ability Usage
/shm ReportCast true/false/on/off/0/1 - Reports Spell Casts
/shm ReportAutoDrop true/false/on/off/0/1 - Reports Auto Dropping
/shm ShowTargeting true/false/on/off/0/1 - Reports when we change target
/shm ReportAassist true/false/on/off/0/1 - Reports when we grab assist target

GHBuffBot:

/shm GHBuffBot true/false/on/off/0/1 - Toggles the Guild Hall Buff Bot Functionality
/shm GHBuffSilent true/false/on/off/0/1 - If on, will never send anyone a tell.
/shm GHBuffGuildOnly true/false/on/off/0/1 - If on, will require the "requester" to also be a member of your guild.
/shm BuffRequestPhrase <buffme> - allows you to change the request phrase