• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Shaman

Plugin - MQ2Shaman 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (114) Reviews (65) History Discussion Terms and conditions
has anyone pointed out yet that the shaman plugin will buff yourself first, then summon a pet, then buff again? can we make it so pet gets summoned, then we only buff once?
 
dcb500 said:
has anyone pointed out yet that the shaman plugin will buff yourself first, then summon a pet, then buff again? can we make it so pet gets summoned, then we only buff once?
Click to expand...
I would rather get my focus out before i do my pet, even if it is an extra cast after the fact, this is/was intentional.

all other spell mem buffs are after pet checking other than focus (other than summoning food, but that isn't a buff, only mentioned because of it memorizing - or preincarn/sow because that would be much lower level)
 
Odd bug. When I claim "Overseer Rare Agents x2" from "Elite Agent Echo" item given when retiring purple agents, the MQ2shaman plugin output window updates that : pullAA: Turgur's Swarm.
 
Rare Spawn said:
Odd bug. When I claim "Overseer Rare Agents x2" from "Elite Agent Echo" item given when retiring purple agents, the MQ2shaman plugin output window updates that : pullAA: Turgur's Swarm.
Click to expand...
No, it isn't a bug.

We cycle through your spells when you get a reward received - in case spells or aas change etc. Due to how pull aas are stored/checked, it is gonna spit it out each time.
 
Hi Sic and CWTN, so very sorry for the contious quetions.

Shamans option USE CHEETAH ON

the aa description of this aa is listed as follows:

1670605226876.png

although the information on the AA tab says your tatgets group, i believe this has changed to group only.

Reasoning:

I am running 2 shamns in 2 diferent groups and the both are trying to cast it and its not landing on the group that none of the shamans are. Note: they are on XTarget Buff
1670605406286.png

Shaman #1 and Shaman #2 continues to try to cast cheetah on an XTARGET buff allowed player but there isnt a shaman in that specific group.


if this has been addressed i apologize
 
Last edited by a moderator:
ok ty i'll take a look.

hrm. we actually already don't try and cast it on xtarget members
I adjusted how we do this specifically because of this AA back in August of 2020
1670606350791.png

can you just 100% confirm the person they are trying to cast upon is in fact an xtarget member and not a group member.

can you confirm you are not having red error stack checking errors

edit: can you verify you are or are not in a raid with raidmode on? I'm betting you are =p, which means this needs an update not to check raid members
edit edit: hrm nope, trying to replicate it with xtarget or with raid, and it isn't doing it
 
Last edited:
Sic said:
ok ty i'll take a look.

hrm. we actually already don't try and cast it on xtarget members
I adjusted how we do this specifically because of this AA back in August of 2020
View attachment 44086

can you just 100% confirm the person they are trying to cast upon is in fact an xtarget member and not a group member.

can you confirm you are not having red error stack checking errors

edit: can you verify you are or are not in a raid with raidmode on? I'm betting you are =p, which means this needs an update not to check raid members
edit edit: hrm nope, trying to replicate it with xtarget or with raid, and it isn't doing it
Click to expand...
Hi Sic, every thing you had stated is correct with the exeption of confiming if im in raid mode. Yes in this istuation i am in raid mode. Thank you Note: come to believe this behavior does not exsist when not in raid mode. ince again than you
 
Request:
please consider to swap Dot "Obea" for the new "Tegi Pandemic" for the standard setup.
Motivation:
- I am happy with the standard setting and do not know, what would change if I start to use byos, apart from just the one spell swapped.
- "Tegi Pandemic" has the same casttime than "Obea" but delivers atleast 50% more dps. On top of that the inflicted dots run twice as long, which will save recast time on nameds.
 
Dragonslayer said:
Request:
please consider to swap Dot "Obea" for the new "Tegi Pandemic" for the standard setup.
Motivation:
- I am happy with the standard setting and do not know, what would change if I start to use byos, apart from just the one spell swapped.
- "Tegi Pandemic" has the same casttime than "Obea" but delivers atleast 50% more dps. On top of that the inflicted dots run twice as long, which will save recast time on nameds.
Click to expand...
I made a post about spells.

Yep. I plan on checking a few things, but we already do use pandemiccombo in dps loadout. Hexdot in 7, pandemiccombo is 5

On mobile ATM, will check later.
 
vearroyo said:
Doesnt appear to be using the new Roar Line spells from NOS.

Ecliptic Roar - Still memming Composite Roar instead

Just FYI
Click to expand...
it does.

this means you're likely using a raid bp that gives you extended duration to composite. which we're going to use over shorter duration ecliptic

> MQ2Shaman FAQ <

Q. Why am I using Dissident over Composite?.
A. We will use Dissident if you are wearing tbl/tov raid t1/t2 bp after feb 12th, 2021 as the tbl/tov raid bp gives you double duration on your dissident.

Q. Why am i Using Composite over Ecliptic?
A. We will use Composite if you are wearing the cov/tol double duration bp
 
Before I try to make a React or other fancy thing I don't know how to do, does MQ2Shaman have any magic built in that checks for the bard epic buff before it fires up? If not, is the best way to solve that to add a cond in the Bard KA to check for the shaman spell and then fire the BoV?
 
Berkz said:
Before I try to make a React or other fancy thing I don't know how to do, does MQ2Shaman have any magic built in that checks for the bard epic buff before it fires up? If not, is the best way to solve that to add a cond in the Bard KA to check for the shaman spell and then fire the BoV?
Click to expand...
No, we intentionally don't have that option. Bard will have a "wait for shm epic" but I strongly don't recommend shaman waiting for bard. They are too busy of a class, in our opinion, to wait.

May it be an option later? Maybe. Plans to do it? No
 
Gotcha! Thanks Sic. I will put a cond in bard KA as soon as I figure how to do it LOL
 
Shaman uses the old spell

It has four levels of Ecliptic Roar spell

but still use 5lvl Composite Roar spell
 
tridmar said:
Shaman uses the old spell

It has four levels of Ecliptic Roar spell

but still use 5lvl Composite Roar spell
Click to expand...
what are you using for automation? you didn't say or post in a place where it would indicate.

I'm going to guess you're using mq2shaman, because that is in your downloads, in which case a: please post in the correct location, and b: please read the FAQ

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

Q. Why am I using Dissident over Composite?
A. We will use Dissident if you are wearing tbl/tov raid t1/t2 bp after feb 12th, 2021 as the tbl/tov raid bp gives you double duration on your dissident.

Q. Why am i Using Composite over Ecliptic?
A. We will use Composite if you are wearing the cov/tol double duration bp

can you confirm what you're using so i can move this to the correct location?
 
Brando said:
Playing with the EMU version of the plugin and after purchasing Pack of the Wolf AA it's spamming it over and over again. Added Spell: Pack of the Wolf and Spell: Pact of the Wolf Effect to the blocked spells but the spamming behavior continues. Any advice?
Click to expand...
I have same problem. I know this is from a few years ago, and I saw the response from CWTN. Just curious if anyone found a fix besides turning off cwtnbuffs on all the characters and buffing manually.
 
jj429 said:
I have same problem. I know this is from a few years ago, and I saw the response from CWTN. Just curious if anyone found a fix besides turning off cwtnbuffs on all the characters and buffing manually.
Click to expand...
No, unfortunately - that is how you have to handle that and you shouldn't use mq2 legacy and the mq2 legacy plugins. They are unsupported and will not receive updates.

There is a sticky pinned about cwtn class plugins and emu, please check it out
 
Group is sk, bard, rog x3 and the shaman. All are CWTN except of course the bard. Any help appreciated.
 
Any chance shams could please get a Shrink Pet toggle?

Thank you for your work on this! My sham is heart of my crew.
 
Tebus said:
Any chance shams could please get a Shrink Pet toggle?

Thank you for your work on this! My sham is heart of my crew.
Click to expand...
we already shrink the group - we're not going to have an additional toggle for shrinking the pet when that can cover it. shaman dog is also weird where double shrink can actually make it bigger.

Due to eq and how it handles models, we only shrink when over a certain size (2.04) specifically because a model/spawn does not give an indication on how small it can be, and we don't want to spam try and shrink something

I suggest and strongly recommend get a pet metamorph totem - bixie or viritik (spelling) are my recommendations, as you can see if they are holding weapons
 
Sic said:
we already shrink the group - we're not going to have an additional toggle for shrinking the pet when that can cover it. shaman dog is also weird where double shrink can actually make it bigger.

Due to eq and how it handles models, we only shrink when over a certain size (2.04) specifically because a model/spawn does not give an indication on how small it can be, and we don't want to spam try and shrink something

I suggest and strongly recommend get a pet metamorph totem - bixie or viritik (spelling) are my recommendations, as you can see if they are holding weapons
Click to expand...
Thanks for explaining sir!
 
Could you add a check box so that Lanquid Bite always stays enabled? Doing AOE's and an option to use it would be a nice to have.
Thanks.
D
 
Deeyoh said:
Could you add a check box so that Lanquid Bite always stays enabled? Doing AOE's and an option to use it would be a nice to have.
Thanks.
D
Click to expand...
no, don't plan on doing that.

we ONLY toggle it off when we go to use turgurs, and then we'll put it back if it was on previously.

I could see an argument to be made that we don't turn that off when useaoe is on - but we won't be adding another toggle.

would not toggling that off when useaoe is turned on meet your needs?
 
Good Afternoon RedGuiders !

I'm not sure if this has been addressed or not, but I wanted to notify the powers that be. I am in a group with a cleric (with plugin) and a shaman (with plugin). They are both level 41 currently. The shaman is attempting to buff the cleric with Talisman of Tnarg and it won't hold due to Armor of Protection, yet he is continuously trying to do this. I know that I could block the spell on the cleric, but is there a way for the shaman to recognize that this won't hold and stop attempting? Thanks again for a great product with the plugins (I currently have 8 of the plugins), which make me very happy :)
 
Linqdedd83 said:
Good Afternoon RedGuiders !

I'm not sure if this has been addressed or not, but I wanted to notify the powers that be. I am in a group with a cleric (with plugin) and a shaman (with plugin). They are both level 41 currently. The shaman is attempting to buff the cleric with Talisman of Tnarg and it won't hold due to Armor of Protection, yet he is continuously trying to do this. I know that I could block the spell on the cleric, but is there a way for the shaman to recognize that this won't hold and stop attempting? Thanks again for a great product with the plugins (I currently have 8 of the plugins), which make me very happy :)
Click to expand...
Hi linq, thanks for the kind words, and glad you're enjoying things

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

check the mq2shaman FAQ - what to do with spells that eq/mq report stacking that dont are addressed there.

1675033611841.png
 
Sic said:
no, don't plan on doing that.

we ONLY toggle it off when we go to use turgurs, and then we'll put it back if it was on previously.

I could see an argument to be made that we don't turn that off when useaoe is on - but we won't be adding another toggle.

would not toggling that off when useaoe is turned on meet your needs?
Click to expand...
That would be perfect actually. Since it would be clear that AOE damage would be going out.

Thanks,
D
 
Deeyoh said:
That would be perfect actually. Since it would be clear that AOE damage would be going out.

Thanks,
D
Click to expand...
perfect, thanks for talking that out with me, that makes good sense to me (and no extra toggle needed)
 
Sic said:
perfect, thanks for talking that out with me, that makes good sense to me (and no extra toggle needed)
Click to expand...
Just wanted to follow up. I have been using AOE constantly since the change was made. Works great!!! Thanks for the update.
 
I asked a similar question about the Necro but having the same issue with the Shaman. Using MQ2Shaman and the need to target a specific player in the group to hit them with a cure. Tried with Assist/BYOS and Vorpal/BYOS and it kept popping back to healing the main tank/assist. Would I be best served to put a Cleric in the group or is there a way to make this work with the Shaman.
 
You must log in or register to reply here.
Plugin - MQ2Shaman
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -