• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Paladin

Plugin - MQ2Paladin 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (54) Reviews (8) History Discussion Terms and conditions
quick Pally plug appreciation post:

this has got to be my favorite of the newer plugins so far, up until this was released i never gave pallys a thought .... i main drive on a warrior but always had sks as knights ... this plug does the pally class a lot of justice. i love it and use them more now then sks ... thanks for all the hard work you guys put into this.

cheers
 
519helvis said:
quick Pally plug appreciation post:

this has got to be my favorite of the newer plugins so far, up until this was released i never gave pallys a thought .... i main drive on a warrior but always had sks as knights ... this plug does the pally class a lot of justice. i love it and use them more now then sks ... thanks for all the hard work you guys put into this.

cheers
Click to expand...
thanks 519,

Pallies aren't as fun for me "driving" as sk, but the class itself is pretty awesome - and for automation i think they're a sleeper PL tank because of the rez functionality
 
Is there any kind of interaction that would stop my paladin from using Staff of Forbidden Rites? I'm not quite sure what information to provide as I'm not seeing any output, he just isn't using it with UseRezStick activated. I have tried with "UseRez" both on and off.
 
Gambler said:
Is there any kind of interaction that would stop my paladin from using Staff of Forbidden Rites? I'm not quite sure what information to provide as I'm not seeing any output, he just isn't using it with UseRezStick activated. I have tried with "UseRez" both on and off.
Click to expand...
no, not really

there's this in the FAQ

Q: I don't want to rez everyone in combat, I swap targets too much.
A: You can use your "GroupWatch" to determine who you want to rez > in combat <. Paladin is the only plugin we use groupwatch outside of pulling, but it is a nice way to not rez people you don't want to rez while in combat. outside of combat we would rez anyone like normal.
 
Sic said:
no, not really

there's this in the FAQ

Q: I don't want to rez everyone in combat, I swap targets too much.
A: You can use your "GroupWatch" to determine who you want to rez > in combat <. Paladin is the only plugin we use groupwatch outside of pulling, but it is a nice way to not rez people you don't want to rez while in combat. outside of combat we would rez anyone like normal.
Click to expand...
TYVM Sic. I remember reading that a long time ago before I had the rezstick now that you pointed it out. Cheers.
 
Update notes didn't post.
MQ2Paladin: |
- Will now use Autoskill for bash

Paladins being magical creatures will now accidentally bash in combat. This is from a built in eq feature called /autoskill. In case you're wondering why the plugin output window doesn't mention we're using bash, it's because the plugin isn't using it, EQ is. The plugin doesn't even realize how amazing your paladin is now. So if you're here to tell me that bash isn't bashing, I'm here to tell you that bash is bashing without telling you it's bashing every time it's bashing.
 
Wrong forum
So sorry if this is the wrong place to be asking/posting this. So my 3 boxing has been really great so I decided to add another to my growing family. But suddenly, everything stopped working. All they want to do is try and buff the newest toon. I think it's because my first 3 are already 85, and the newly added toon is just 59. But everything runs normally when I remove the 59 :( What level should he at least be get these buffs everyone is trying to cast on him? This is just an example of what I see one of my 85 toons attempting to cast on 59.
MQ2Paladin:: Casting ~~>Sworn Keeper RK. III on 59
MQ2Paladin:: Casting ~~>Sworn Keeper RK. III on 59
MQ2Paladin:: Casting ~~>Sworn Keeper RK. III on 59
MQ2Paladin:: Casting ~~>Sworn Keeper RK. III on 59
MQ2Paladin:: Casting ~~>Sworn Keeper RK. III on 59

Am I totally just doing something wrong? Please share your words of wisdom to this lowly noob trying to learn all these new things. Thank you all so much for taking the time to help out with my inquiry.
 
Hi Joeshie,

Did you try blocking that spell ID on the level 59 toon for now?

Q. I appear to be chain casting Brells - or some other spell?
A. There are a few of these buffs that eq/mq reports stack that do not or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built-in EverQuest feature - right-click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

/blockspell add me id
/blockspell add pet id
 
Hi there, yes that was my initial train of thought to block the spell. But my pally is still trying to cast it. Same thing from my 85 BL trying to cast on 59 with his spells. Everyone wants to buff the lil guy haha. So I am now slowly trying to level him up but was just wondering if I am totally missing something.
 
joeshie said:
Hi there, yes that was my initial train of thought to block the spell. But my pally is still trying to cast it. Same thing from my 85 BL trying to cast on 59 with his spells. Everyone wants to buff the lil guy haha. So I am now slowly trying to level him up but was just wondering if I am totally missing something.
Click to expand...
mq2paladin questions go in the mq2paladin thread (i know you said various toons but specifically you're asking about mq2paladin)

you would either a: block the spells on "the little guy" or b: go byos on everyone so you don't buff.

there isn't anything in spell data that says "this is the level this spell can be cast upon, even if there are some basic rules around that, so we're going to try and cast on people that we think we can.

blocking the specific spell (on the toon that it is being cast upon) does, 100% make it so we don't cast that buff on them.

so your lvl 59 dude you would block "Sworn Keeper RK. III"
 
Ohhh BYOS! Thanks for the hand and sorry for posting in the wrong place. Not used to posting as well.
 
Yes the plugins are totally my cup of tea. So I was slightly bummed when everything suddenly "froze" (everyone else wanting to just buff) than them helping me kill everything.
 
I have tried a few things with groupwatch and have still been unsuccessful at getting my lvl 95 paladin to use staff of forbidden rites. I have turned off all other rezzes in my group. Killed group members and he will not rez them. My shaman uses her rez stick just fine. Are there any other interactions that need to be true for the rezstick to fire on group members other than groupwatch?
 
Gambler said:
I have tried a few things with groupwatch and have still been unsuccessful at getting my lvl 95 paladin to use staff of forbidden rites. I have turned off all other rezzes in my group. Killed group members and he will not rez them. My shaman uses her rez stick just fine. Are there any other interactions that need to be true for the rezstick to fire on group members other than groupwatch?
Click to expand...
userez has to be turned on
userezstick has to be turned on

are you sure you have the correct rez stick that we use? or do you have one other other versions of it? we use item ID = 56616

we also don't use rez stick in safe zones - so if you're just killing yourself in the guild lobby/hall, we're not going to do it there.
you could /pal debugrez on and then tell me what it spits out (you'll prolly want to PM or block out names)
 
I'm no expert with stick settings, but with this going my pally essentially stuns the first mob, while the other 3 to 4 continue to run in, then he runs to that first mob to fight it, all the other mobs are now behind him and ripping him to shreds while he doesn't give a crap, does anyone know a good stick setting to avoid this? It's in tank mode for this btw.
 
Gorlio said:
I'm no expert with stick settings, but with this going my pally essentially stuns the first mob, while the other 3 to 4 continue to run in, then he runs to that first mob to fight it, all the other mobs are now behind him and ripping him to shreds while he doesn't give a crap, does anyone know a good stick setting to avoid this? It's in tank mode for this btw.
Click to expand...
There isn't a stick to swap around.

You're not target locked, change targets if you want to change targets, we won't swap around
 
Ahh that's too bad, I was hoping there would be some kind of setting that would realize there are a bunch of things smacking me in the butt, better take 5 steps backward and let the one I'm tanking come to me.
 
Gorlio said:
Ahh that's too bad, I was hoping there would be some kind of setting that would realize there are a bunch of things smacking me in the butt, better take 5 steps backward and let the one I'm tanking come to me.
Click to expand...
Are you not using CC? Should let CC do it's job.
 
Nah, ber bst mnk brd shm pal. I can survive 8-10 fine when I'm actually driving him and positioning properly, but without the MG mesh working I wanted to just pull with bard and hoped the pally bot program would tank close to as well as I can just playing him. Bard is too low for ae mez and I don't think it comes out until UF anyways.
 
This is a great plugin, it's so fun to watch the Paladin just dominate DPS whenever the Necro in the group lands the undead conversion nuke.
 
I'm trying to diagnose an issue I've been having with my pally

Whenever I pull one specific named my pally doesn't do anything, just sits in camp and watches the monk fight. I've watched him do it numerous times, he works fine once i manually pick a target but any time i get that named, regardless of how many mobs come with it, pally does nothing. If i don't manually pick the target eventually my monk tends to kill the named and then he'll stand up and go back to work like normal, break over.

named in question:

everquest.allakhazam.com

Coleoptera Assault Sweeper

Everquest Mob, NPC, Bestiary Information for Coleoptera Assault Sweeper
everquest.allakhazam.com everquest.allakhazam.com
 
shiftup said:
I'm trying to diagnose an issue I've been having with my pally

Whenever I pull one specific named my pally doesn't do anything, just sits in camp and watches the monk fight. I've watched him do it numerous times, he works fine once i manually pick a target but any time i get that named, regardless of how many mobs come with it, pally does nothing. If i don't manually pick the target eventually my monk tends to kill the named and then he'll stand up and go back to work like normal, break over.

named in question:

everquest.allakhazam.com

Coleoptera Assault Sweeper

Everquest Mob, NPC, Bestiary Information for Coleoptera Assault Sweeper
everquest.allakhazam.com everquest.allakhazam.com
Click to expand...
With the limited information I can only say that we don't have anything in the code that says to not help with that mob.

But, my guess is a campradius issue. Try increasing your camp radius.
This is assuming the monk is pulling and the Paladin is on assist or tank mode.
 
Did you check the FAQ about large mobs and campradius? I'm betting this mob is outside your camp like cwtn said
 
Sic said:
Did you check the FAQ about large mobs and campradius? I'm betting this mob is outside your camp like cwtn said
Click to expand...
I did read FAQ, I'm not seeing anything related to mob size though?

edit: Found it on the SK one, it's listed there but not in the pally one. Thanks!

Copy/pasting here for the answer:

Q. Sometimes a mob keeps hitting me but i don't engage? Ex. Dracoliches
A. This means you need to make your campradius bigger, as the mob is likely a "large" model mob and is hitting you from outside your campradius.
 
Problem: UseRemorseFallen | UseStanceBuff

Both of these /Slash Command reports back invalid
1700658354798.png

Command Information Page does show a slash command for

/pal UseRemorseFallen true/false/on/off/0/1 - Use Remorse of the Fallen.

But Does Not have a Slash Command for "UseStanceBuff"

Thanks
 
KS1980 said:
Problem: UseRemorseFallen | UseStanceBuff

Both of these /Slash Command reports back invalid
View attachment 53420

Command Information Page does show a slash command for

/pal UseRemorseFallen true/false/on/off/0/1 - Use Remorse of the Fallen.

But Does Not have a Slash Command for "UseStanceBuff"

Thanks
Click to expand...
k thx
 
lanceval said:
Hi There,
Just started to use this plugin with a lvl 100 Paladin but it does not memorize and use gem #12.
it is staying empty.
I don't have anything missing except Epic.
Ini file is not customized.
Code: 
[General]
FontSize=font 4
[toon name]
Show=1
I filled it with a custom BYOS for the time being.
What spell is supposed to be in gem 12 ?
Click to expand...
that ini isn't even something for you to look at at all, and showing it to me just shows your font size and if you have it visible. that's not even your settings file (which also would not be helpful).

gem12 we put preservation if you have usepreservation turned on (and not otherwise memorized) and otherwise ForceT4 (if not memorized).

if you have an empty gem, you can just put a spell in it, you don't even have to byos custom - if it isn't putting a gem in it, it won't take something out of it.

since you don't have your progressive spell at 100, we put preservation in gem 10

you get your progressive spell at lvl 101.
 
After this last update I'm getting stuck in a memorize loop on aego/hp buffs. (Memming aego, then regular slot 8 without firing the buff) It started by defaulting to symbol without that option checked. Blocked that spell and it went back to aego.
 
You must log in or register to reply here.
Plugin - MQ2Paladin
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -