• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Enchanter

Plugin - MQ2Enchanter (3 Viewers) 3.1.52471.11

He is in a loop now of memming the new aura, and memming an older nuke he probably shouldnt be casting now, attached is the new nuke aura and what its doing.
can you pause and tell me what the aura that the new aura gives you is called? a snip from your aura window would be helpful

Unfortunately the client information doesn't know what the aura spell is *actually* supposed to be called, and EQ has a bunch of longtime fucked auras

my enchanter isn't 130, so i can't cast it myself
 
can you pause and tell me what the aura that the new aura gives you is called? a snip from your aura window would be helpful

Unfortunately the client information doesn't know what the aura spell is *actually* supposed to be called, and EQ has a bunch of longtime fucked auras

my enchanter isn't 130, so i can't cast it myself
sure thing, like this?
 

Attachments

  • AURAS.png
    AURAS.png
    22.1 KB · Views: 0
@Kruuger lemme know if that fixes it for you

He is now using the best nuke which is really nice, but is still on the mem new aura drop aura mem mindreap chain. I tried turning replication off to see if maybe there was some confusion but didn't work. I actually think this exact same thing happened in LS.
 

Attachments

  • output.png
    output.png
    236.9 KB · Views: 0
He is now using the best nuke which is really nice, but is still on the mem new aura drop aura mem mindreap chain. I tried turning replication off to see if maybe there was some confusion but didn't work. I actually think this exact same thing happened in LS.
well no, replication is for the spell not the aura - you'd pick a different aura if you didn't want to use that aura.

it is memorizing and casting it because it doesn't think you have the aura it gives --- can you screensnip your current auras.

you don't need to snip me that it is memorizing, casting, then memorizing a new spell, and then rinse/repeat - i understand that, we need to figure out why - and how to fix it.

usually i'd log my enchanter on and see it first hand, but mine isn't 130
 
Just updated plugin and the problem is still there. Aura disappears a few seconds after cast. This causes enchanter to keep casting
this is not enough information to do anything with at all.

please see the "how to ask for help"
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<< :)

I'm going to need the following:

- what auras you are using (specifically by name and rank)
- if you cast them manually what is the full name in your aura window
 
Just updated plugin and the problem is still there. Aura disappears a few seconds after cast. This causes enchanter to keep casting
Your license is expired. You did not update because your license isn't active anymore. So the plugin works, but did not get the update. Your existing plugin will stop working next time EQ does an update unless you renew.
 
Your license is expired. You did not update because your license isn't active anymore. So the plugin works, but did not get the update. Your existing plugin will stop working next time EQ does an update unless you renew.
lol thanks for checking - I definitely wouldn't have guessed dude saying that he just updated but he didn't.

yikes
 
Your license is expired. You did not update because your license isn't active anymore. So the plugin works, but did not get the update. Your existing plugin will stop working next time EQ does an update unless you renew.
ahhh, ty. i'll get a new one.

as for more info, i'm merely echoing all info already posted. next time i'll try to get register values, stack traces, etc.
 
Been using this for a week, and I've noticed that my Enchanter sporadically casts slow on mobs. I have the proper check boxes checked in the settings box, and it's happened so much so that a mob will just go completely unslowed, that I've had to put in my slow clickie from PoTime in the Offensive Clickies to get my Enchanter more things to use to slow the mobs. She's just not using Helix to slow for half the mobs. What's going on?
 
Been using this for a week, and I've noticed that my Enchanter sporadically casts slow on mobs. I have the proper check boxes checked in the settings box, and it's happened so much so that a mob will just go completely unslowed, that I've had to put in my slow clickie from PoTime in the Offensive Clickies to get my Enchanter more things to use to slow the mobs. She's just not using Helix to slow for half the mobs. What's going on?
howdy pshayes7 that sounds frustrating.

please make sure you familiarize yourself with our FAQ which includes a part about "how to ask for help".

There are only a few things we would prioritize over tash and slow - mezzing and charming are pretty high on that list

I'm going to assume you mean the AA "Slowing Helix" and not one of the earlier spells from our "slow" line called "___ helix"

I'm going to assume you have "UseSlow" and "UseSlowAE" enabled - if not those have to be on to do those respective things.

I'm going to assume you have your group MA assigned (we only slow your group MA's target, we don't willy nilly target stuff)

We slow mobs that are at/below your assistat value (or if you are meleeing them already), they'd need to not have a better slow on them already

We slow mobs that are inside your campradius and on xtarget (unless we're already targeting it and melee is on)

if we're using Enveloping Helix (UseSlowAE) we do that first since the 3m cooldown and covers more mobs

After checking for Enveloping Helix, we check for Slowing Helix -> if we don't have Slowing Helix AA, we check if we have Serpent of Vindication and use that -> if we don't have either of those (or slow stick isn't ready), we check if we have a slow spell memorized, that they dont have the buff on them, and if they don't already have a "slower" slow buff
 
For AoE Mez it is only wanting to load and use Entrancing Stare (125). Will not load the new Hypnotic Stare (130). If you use BYOS to slot it, it wont cast in mob count situations where it should.
 
For AoE Mez it is only wanting to load and use Entrancing Stare (125). Will not load the new Hypnotic Stare (130). If you use BYOS to slot it, it wont cast in mob count situations where it should.
thanks.

as always the important bit is what the plugin says is in the group - byos (with very few exceptions) only uses the spells it says it uses.

in this case the upgrade is just missing but i'll add
 
Question: Enchanter constantly keeps moving out of tanks ranger to attack

Exactly why is my enchanter constantly keep moving? i she is doing nothing but mezzing and dotting but she always moves around 1766672614579.png

Thank you
 
Last edited by a moderator:
Question: Enchanter constantly keeps moving out of tanks ranger to attack

Exactly why is my enchanter constantly keep moving? i she is doing nothing but mezzing and dotting but she always moves around View attachment 73791

Thank you
If it doesn't have line of sight and needs to mez it will.

You know to check FAQ before asking, please try and do so. Your question to it being in FAQ ratio is too high

Q. My enchanter is sometimes moving to do stuff when I don't have usemelee on?

A. If you are in any mode other than manual mode, you will move to mez if you don't have line of sight and the mob is in your camp radius. You will also move to get into your combat routine for things like tashing, slowing, debuffing, and to get combat going. Since our caster classes are always going to assist their MA, even in manual mode (because manual mode is really designed for melee classes), you can just go in manual mode to disable
 
Question: Enchanter constantly keeps moving out of tanks ranger to attack

Exactly why is my enchanter constantly keep moving? i she is doing nothing but mezzing and dotting but she always moves around View attachment 73793

Thank you
I replaced your image with one with less of your toon names in it. Hopefully we can take more care in the future not to include names in your posts.
 
Odd question perhaps, during burns, my enchanter keeps "moving" around target; unlike my wizard or mage etc who lock on target and cast away. Because the enchanter keeps moving, he does not cast. Any insight? ive tried changing stances, etc.
 
Odd question perhaps, during burns, my enchanter keeps "moving" around target; unlike my wizard or mage etc who lock on target and cast away. Because the enchanter keeps moving, he does not cast. Any insight? ive tried changing stances, etc.
Usemelee + mob flipping so he keeps trying to get to the back?
 
Odd question perhaps, during burns, my enchanter keeps "moving" around target; unlike my wizard or mage etc who lock on target and cast away. Because the enchanter keeps moving, he does not cast. Any insight? ive tried changing stances, etc.
If it doesn't have line of sight and needs to mez it will.

You know to check FAQ before asking, please try and do so. Your question to it being in FAQ ratio is too high

Q. My enchanter is sometimes moving to do stuff when I don't have usemelee on?

A. If you are in any mode other than manual mode, you will move to mez if you don't have line of sight and the mob is in your camp radius. You will also move to get into your combat routine for things like tashing, slowing, debuffing, and to get combat going. Since our caster classes are always going to assist their MA, even in manual mode (because manual mode is really designed for melee classes), you can just go in manual mode to disable
is it moving to get los to mez? 2 messages above you answered a similar question, which is in the FAQ both in-game and on the forums.

outside of if you are usemelee and naving to the mob and then utilizing your stickhow, or moving to get los to mez we don't do "willy nilly" movement
 
is it moving to get los to mez? 2 messages above you answered a similar question, which is in the FAQ both in-game and on the forums.

outside of if you are usemelee and naving to the mob and then utilizing your stickhow, or moving to get los to mez we don't do "willy nilly" movement
Single mob. No need to mez. I do have Use melee on - I am not flipping the mob.

I cant explain it otherwise. Thanks for the replies, I shall keep trying to rectify it.
 
Single mob. No need to mez. I do have Use melee on - I am not flipping the mob.
well - assuming you have your group ma set (otherwise we would try and mez the mob since it wasn't being targeted by your group assigned ma) - but i would check your stickhow

the default for casters in StickHow0 is 55% !front moveback loose uw

re: only during burns - that is pretty suspect - there's nothing that we're doing for movement during burns we wouldn't be doing otherwise in the aforementioned times we move.

I would double check you're not having "follow me" stuck on, or otherwise /stick or /afollow in a hotkey or something

other than that the only thing i can think of is if you're not using framelimiter (or new ui engine) and you're having background performance problems - this *certainly* can cause issues with box movement in the background
 
sic, tried figuring it out myself. i just bought but he keeps running to fight instead of staying put, melee is off stick is off is he casting something that he has to run to mob for ? he doesnt do it every time and doesnt melee just stands there and casts then runs back after mob dead.. sorry i know jack about ench and cant figure it out
 
sic, tried figuring it out myself. i just bought but he keeps running to fight instead of staying put, melee is off stick is off is he casting something that he has to run to mob for ? he doesnt do it every time and doesnt melee just stands there and casts then runs back after mob dead.. sorry i know jack about ench and cant figure it out
in the faq and in a few comments above you.

if you are in any mode other than manual and a mob is entering your campradius and it needs to mez it but it doesn't have LOS - it will move to it
 
oh ok i did try looking through faq and commands first! but ty
Q. My enchanter is sometimes moving to do stuff when I don't have usemelee on?
A. If you are in any mode other than manual mode, you will move to mez if you don't have line of sight and the mob is in your camp radius. You will also move to get into your combat routine for things like tashing, slowing, debuffing, and to get combat going. Since our caster classes are always going to assist their MA, even in manual mode (because manual mode is really designed for melee classes), you can just go in manual mode to disable this.
 
yes, by rank specifically, has always been like that and we've talked about it before :)
that is on purpose
I have 3 diff enchanters with 3 diff ranks of this spell... they're basically doing nothing other than casting this spell on blocked people
 
I have 3 diff enchanters with 3 diff ranks of this spell... they're basically doing nothing other than casting this spell on blocked people
sorry to hear that - unfortunately there's no way to be like "some spells we care about blocked by specific rank and others we care about any amount of blocking" so we block it by rank specifically - you could byos on the toons you don't want to do the meleeauspicing or put their reagent in the bank.

We only buff tank classes with this
 
Plugin - MQ2Enchanter

Users who are viewing this thread

Back
Top
Cart