• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Enchanter

Plugin - MQ2Enchanter (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (117) Reviews (34) History Discussion Terms and conditions
Kookies said:
For what it's worth, the reason it's such a strong nuke at 120 is because of the "Enhanced Ruin" AA line. At level 85 I don't think Enchanters have that AA so it really should only be used as a DoT.

Enhanced Ruin's description is deceptive. It claims to only help DoTs, but it also modifies the nuke linked to DoTs when it's applied in a classic EQ Math setting.
Click to expand...
we still respect dotmanamin for breathing dot, even for nuke purposes. and we only use it in the aformentioned capacity after it does more damage than chroma nuke
 
I just started using this program and i am getting very..mixed results. Sometimes it works, sometimes it doesn't quite often my enchanter just sits around the whole battle doing nothing even there is a mob to kill. sometimes it works great.



I have the tank set as the main assist.

settings.PNG

I have a good bulk of the spells it mentions on startup but not all of them. Do i need ALL of the spells, even the lower levels ones? Or is it smart enough to choose something else?

I really just want to get this running properly. Do I turn it on with kissassist, or do i just ignore kissassist?
 
cjswanson1355 said:
I just started using this program and i am getting very..mixed results. Sometimes it works, sometimes it doesn't quite often my enchanter just sits around the whole battle doing nothing even there is a mob to kill. sometimes it works great.



I have the tank set as the main assist.

View attachment 53262

I have a good bulk of the spells it mentions on startup but not all of them. Do i need ALL of the spells, even the lower levels ones? Or is it smart enough to choose something else?

I really just want to get this running properly. Do I turn it on with kissassist, or do i just ignore kissassist?
Click to expand...
Group main assist assigned, enchanter in the group. Mobs need to enter the camp radius. You can visibly see your camp radius if you turn on layer 3 of the eq in game map.

Please choose your aura1 and aura2.
NukeManaMin and DoTManaMin should be set appropriately based on when you want the enchanter to stop DoTing and Nuking.
Other than it's hard to know what is going on with the information provided.

You do not need all the spells. It will use the lower level ones if it can.
Do not run it with kissassist. Ever
 
By and large If the plugin says you're missing something, you should get it.

Mob has to be in your campradius, with your group assigned main assist fighting the mob in melee range.

To nuke you have to have your nukemanamin and to dot your dotmanamin
 
cjswanson1355 said:
How do I save my settings? The video just says "use a slash command." What slash command do I use?
Click to expand...
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

That sticky there takes you on a full journey into understanding and navigating through the cwtn class plugins. The video there shows you the commands, faq, etc for each plugin and how to find that information.

mq2enchanter has
Overview, Commands, Instructions, FAQ, etc

if you click the "Commands" tab you will see the slash commands
1700232818592.png
 
The video and documentation do not tell me how to save settings. The video just tells me to use the slash command. What slash command? If I go to the commands documentation the save command is not listed.

So if i go to the link here: https://www.redguides.com/community/resources/mq2enchanter.1612/field?field=commands

There is nothing that states how to save the settings.

Sorry, not train to be a pain. I have spent a couple hours now today trying to figure out how to save the settings.
 
cjswanson1355 said:
The video and documentation do not tell me how to save settings. The video just tells me to use the slash command. What slash command? If I go to the commands documentation the save command is not listed.

So if i go to the link here: https://www.redguides.com/community/resources/mq2enchanter.1612/field?field=commands

There is nothing that states how to save the settings.

Sorry, not train to be a pain. I have spent a couple hours now today trying to figure out how to save the settings.
Click to expand...
there is no explicit save command. those slash commands persist the setting.
if you do /enc UseDot on, then dots are saved as on.
 
cjswanson1355 said:
The video and documentation do not tell me how to save settings. The video just tells me to use the slash command. What slash command? If I go to the commands documentation the save command is not listed.

So if i go to the link here: https://www.redguides.com/community/resources/mq2enchanter.1612/field?field=commands

There is nothing that states how to save the settings.

Sorry, not train to be a pain. I have spent a couple hours now today trying to figure out how to save the settings.
Click to expand...
The slash command is what saves the settings. The buttons on the settings page are temporary changes
 
cjswanson1355 said:
The video and documentation do not tell me how to save settings. The video just tells me to use the slash command. What slash command? If I go to the commands documentation the save command is not listed.

So if i go to the link here: https://www.redguides.com/community/resources/mq2enchanter.1612/field?field=commands

There is nothing that states how to save the settings.

Sorry, not train to be a pain. I have spent a couple hours now today trying to figure out how to save the settings.
Click to expand...
the commands are in the command tab.

use the slash command.

eq is fundamentally controlled by slash commands

/who

/char

/wave

all slash commands

the commands tab has all the slash commands for mq2enchanter

/enc help - shows the help menu

typing "/enc help" and then pressing enter is "using the slash command '/enc help'" and then that would show you that information
added to the Sticky

Q. I don't know what a slash command is - What is a slash command?
A. A slash command is something like /who. You type / followed by other stuff. EQ has made you use slash commands forever. the interaction with MQ and MQ utilities all utilize slash commands as well. A slash command for mq2eskay might be /shd help or /shd usebeza on.
 
cjswanson1355 said:
Logged in today and keep getting this error on all of my CWTNs.

do I need to reinstall and reconfigure everything again? I have had these for less than a week.View attachment 53481
Click to expand...
If you have already checked the RG Launcher Plugin Tab then read the following:
- The RG Launcher is unable to *delete* old files.
-- This means you will get an error box if you don't have a current plugin that matches the mq build
-- your options are:
--- a: purchase a license
--- b: delete the old .dll in your plugin folder, and/or
--- c: change your macroquest.ini to MQ2PluginName=0 under [Plugins]
 
Maybe I missed this somewhere in another class plugin, but is there a setting somewhere that determines what buffs to cast on certain classes? My enc will cast haste/clarity on the SK if I click the buffs off, but won't on the necro. I know necro doesn't need either but how does it determine SK needs the buff vs the necro?
 
theocracy said:
Maybe I missed this somewhere in another class plugin, but is there a setting somewhere that determines what buffs to cast on certain classes? My enc will cast haste/clarity on the SK if I click the buffs off, but won't on the necro. I know necro doesn't need either but how does it determine SK needs the buff vs the necro?
Click to expand...
Does you necro have mana regen already? I feel like it does. Bet chanter buff doesn't stack with it. So we're not going to cast if we know it won't stick. Also chanter probably doesn't waste their mana with hasting the pure caster necro.
 
ChatWithThisName said:
Does you necro have mana regen already? I feel like it does. Bet chanter buff doesn't stack with it. So we're not going to cast if we know it won't stick. Also chanter probably doesn't waste their mana with hasting the pure caster necro.
Click to expand...
But how does it determine the need for haste or not on specific classes (besides the plugin clicked UseHaste)? I'm trying to get her to cast Mana Flare on local comp chars but will only do haste and clarity.
 
theocracy said:
But how does it determine the need for haste or not on specific classes (besides the plugin clicked UseHaste)? I'm trying to get her to cast Mana Flare on local comp chars but will only do haste and clarity.
Click to expand...
"How" is a lot more complicated an answer than one might expect.
The "I'm trying to get her to cast Mana Flare" bit is something we can discuss as opposed to how does it do what it does.

So that's part of the "Replication" group. So you're going to need UseReplication on.

In the future, it's more helpful if you provide more information. Instead of just a question, try including other information.
I want XYZ to happen.
I tried ZYX but was unable to get it to work.
Here is what happens.
here is what I expect to happen.

If spell related, the group the spell is in would also be useful.
 
theocracy said:
But how does it determine the need for haste or not on specific classes (besides the plugin clicked UseHaste)? I'm trying to get her to cast Mana Flare on local comp chars but will only do haste and clarity.
Click to expand...
We cast mana replication on local characters (on mq2cwtnbuffs), who mq says it stacks on, and who can cast, when you have usereplication on
 
ChatWithThisName said:
"How" is a lot more complicated an answer than one might expect.
The "I'm trying to get her to cast Mana Flare" bit is something we can discuss as opposed to how does it do what it does.

So that's part of the "Replication" group. So you're going to need UseReplication on.

In the future, it's more helpful if you provide more information. Instead of just a question, try including other information.
I want XYZ to happen.
I tried ZYX but was unable to get it to work.
Here is what happens.
here is what I expect to happen.

If spell related, the group the spell is in would also be useful.
Click to expand...
Perfect thank you.

UseReplication is on. Enc is in the group with necro and they are on the EQBCS server. Will not use Mana Flare.
 
theocracy said:
They are on the same computer as well.
Click to expand...
Pause your necro and click off all their buffs and see if the enchanter casts Mana Flare on them. If it does, then the necro has something that prevents them from getting them buff, IE: it doesn't stack.
Then unpause the necro and see what overwrites it.

1700779794315.png
 
theocracy said:
Still no dice, just wants to cast Clairvoyance.
Click to expand...
double check all your blocked buffs on your necro - you can see in the above screenshot that it does cast on a necro

since we're already casting other buffs, it is likely either:
- blocked
- doesn't stack

just to confirm - you are getting *other* buffs on your necro, right?
 
ChatWithThisName said:
Does it say "Casting XYZ on NecroNameHere" when it casts other stuff? Perhaps you're just getting group buffs? Have you tried unloading and loading cwtn buffs plugin perhaps?
Click to expand...
Yes it'll cast group C with nec on target like the picture. Nothing is blocked. Must have really screwed something up because now he won't cast lich anymore.

Edit: Weird but will cast Lich in zones besides GL/GH/PoK.
 
theocracy said:
Yes it'll cast group C with nec on target like the picture. Nothing is blocked. Must have really screwed something up because now he won't cast lich anymore.
Click to expand...
Well the necro definitely casts lich if it can use lich on the necro.
I'm leaning towards this is something wrong with the way you have things setup somehow.
All I can do is take the information you're providing and test to see if it's valid by checking those things in game.
Since up to this point everything you're saying we've checked and it's working as intended on our end.
I would also point out that if this were not an issue with something on your end then other users would be reporting the same.

So something you're doing or the way you've got MQ installed etc is likely the problem. It's just a matter of determining the issue.

So lets go through a list of things.
Is the necro in your group?
If not, are they on XTarget with XTargetBuffing on?
Is your MQ stored in a network drive like OneDrive-DropBox-or something else that could cause those files to be locked.
Have you excluded the MQ folder from virus scanners.
Have you loaded either a class plugin, or MQ2CWTNBuffs?

If you cast these spells manually, do you get any output from EQ about it, such as not stacking blocked by something else, doesn't land on them for one reason or another?
 
ChatWithThisName said:
Well the necro definitely casts lich if it can use lich on the necro.
I'm leaning towards this is something wrong with the way you have things setup somehow.
All I can do is take the information you're providing and test to see if it's valid by checking those things in game.
Since up to this point everything you're saying we've checked and it's working as intended on our end.
I would also point out that if this were not an issue with something on your end then other users would be reporting the same.

So something you're doing or the way you've got MQ installed etc is likely the problem. It's just a matter of determining the issue.

So lets go through a list of things.
Is the necro in your group?
If not, are they on XTarget with XTargetBuffing on?
Is your MQ stored in a network drive like OneDrive-DropBox-or something else that could cause those files to be locked.
Have you excluded the MQ folder from virus scanners.
Have you loaded either a class plugin, or MQ2CWTNBuffs?

If you cast these spells manually, do you get any output from EQ about it, such as not stacking blocked by something else, doesn't land on them for one reason or another?
Click to expand...
Necro is grouped with Enc
They are on Xtar with Xtarbuff on.
Enc will cast Voice of Clairvoyance if I click off Lich.
Necro will cast Lich now and overwrite VoC and enc won't try to cast it again (not in PoK/GL/GH).
MQ is in folder on desktop on C: drive. Necro/Enc/CWTNBuffs plugins loaded.
Can manually cast Mana Flare on necro and lands, if I click or let fade enc won't recast.

Appreciate the help on this.
 
theocracy said:
Necro is grouped with Enc
They are on Xtar with Xtarbuff on.
Enc will cast Voice of Clairvoyance if I click off Lich.
Necro will cast Lich now and overwrite VoC and enc won't try to cast it again (not in PoK/GL/GH).
MQ is in folder on desktop on C: drive. Necro/Enc/CWTNBuffs plugins loaded.
Can manually cast Mana Flare on necro and lands, if I click or let fade enc won't recast.

Appreciate the help on this.
Click to expand...
Try removing the necro from XTarget. Shouldn't matter, but may as well try.
 
Added a mage to the group, casts VoC on mage and haste on mages pet. No Mana Flare on mage

Edit: Ok think I got it. UseNightsTerror has to be off. I guess that is part of the same spell line and with that checked won't use Mana flare in hopes of casting that instead?
 
Do you have a Gem 9? Have you got Mnemonic Retention to at least rank 1?
I feel like you're level 70 and should have gotten an AA from level 55 OOW expansion. But perhaps I've made an assumption here that has cost us both a bit more time than it should have.
 
Feature request: Charm immune list.
For example, in Old Bloodfield, there is a blue Ikaav that spawns that will trigger the charm script and suicide or basically be disabled because it's spamming charm on this mob. This mob is mezzable but not charmable and there are mobs of the same name that will be commonplace in your pulls in this zone so you would not want them on your MezImmune list.
 
juice999 said:
Feature request: Charm immune list.
For example, in Old Bloodfield, there is a blue Ikaav that spawns that will trigger the charm script and suicide or basically be disabled because it's spamming charm on this mob. This mob is mezzable but not charmable and there are mobs of the same name that will be commonplace in your pulls in this zone so you would not want them on your MezImmune list.
Click to expand...
There is immune logic for various things on our todo list. We're aware, we'll get to it.
 
You must log in or register to reply here.
Plugin - MQ2Enchanter
Next unread thread 🦁

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Back
Top
Cart

Cart

Total -