-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
Twinkeltoes
Active member
- Joined
- Jan 8, 2022
- RedCents
- 698¢
I've been having a few issues with this, not sure why.
1) it was trying to spam Slowing Helix on mobs and failing, just spamming it and getting Your ability failed. Timer has been reset. (AA is 8/8 and I have Constraining Coil in my spell book)
2) I have Aura's set to Aura1: Spell Focus Aura, Aura 2 Learner's Aura. But I'm getting spammed (during downtime) "Memorizing: Enhancing Aura in slot: 8" which it doesn't do and drops my other two aura's I ended up manually loading.
1) it was trying to spam Slowing Helix on mobs and failing, just spamming it and getting Your ability failed. Timer has been reset. (AA is 8/8 and I have Constraining Coil in my spell book)
2) I have Aura's set to Aura1: Spell Focus Aura, Aura 2 Learner's Aura. But I'm getting spammed (during downtime) "Memorizing: Enhancing Aura in slot: 8" which it doesn't do and drops my other two aura's I ended up manually loading.
1. Check you don't have interrupt turned on if you don't want to interrupt for stuff. That is likely your issue
FAQ
Q. My enchanter appears to be chain interrupting something?
A. This means you have interruptformez turned on - and likely you are firing an AA ability between spell cooldowns, but your regular spells come off cooldown before the AA is casting. You can disable InterruptForMez with /enc interruptformez off
2. enhancing aura is spell focus.
I've tried a few thing and have been searching for a bit probably using wrong terms or wording and can not find the answer on how I can have mq2chanter either not load or load in a paused state rather then immediately start summoning and buffing as soon as I enter world.
is there a command line i can add in game? in the mq2chanter folder? or in a toons cfg file? or something else?
Any help would be greatly appreciated
is there a command line i can add in game? in the mq2chanter folder? or in a toons cfg file? or something else?
Any help would be greatly appreciated
You can use cfg files to do things like that.
If you have any plugin set to be loaded it will be loaded upon startup, and we intentionally don't allow the plugins to start up paused.
But you can use a .cfg file to do anything you want
As answered here: https://www.redguides.com/community/threads/cwtn-plugin-load-unload.81626/#post-512754
please make sure to check and post in the appropriate location
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
from the mq2enchanter commands page
/enc show or /enc toggle as @Lidori mentioned.have a good one (and you're welcome since you said thank you)
Hello there, I just got this plugin.. After I tried shaman and sk I got kinda hooked on trying more of them.. Now that I tried this enchanter one I stumbled upon an issue I've been searching and scratching my head for a couple of hours now.. It keeps buffs up nicely, but the issue I'm having that buffing is the only thing it does.. It dosnt tash, mez, slow or anything other then buffing.. I have it on manual mode, I've tried to change the mode but it instantly changes back to manual mode.. I'm sure it's an easy explanation to the issue I'm just new to this. Anyone have any idea on how to solve the issue?
Combat Assist - MQ2Enchanter - Extra info
www.redguides.com
Q. Trying to go mode 1 but says I need a mesh?
A. The plugins require mq2nav for movement. You will need to run the mesh updater in your RedGuide's Launcher. Please watch the video > HERE <
if you get kicked out of all modes into manual mode it is because you need to get your mq2nav and nav meshes setup.
To do other stuff like dps and debuffing make sure you have your group MA assigned in your group window.
Please make sure to check the CWTN info sticky as well
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
I have a question about settings that I couldn't find answers to. My enc won't mez until there are only 3 mobs on the xtarget. On a 5 pull, nothing is mezzed until 2 are dead. Doesn't even attempt to mez. I have UseChaotic off, UseCharm off, InterruptForMez off, UseMez on and the character is in chase mode. The mobs aren't on the mezimmune list.
I have AoECount=3, BurnCount=7
I'll attach a screenshot of the settings, as well as the plugin output showing not even attempting to Mez or AeMez until 2/5 are dead. Do I have something configured incorrectly? I've tweaked the BurnCount up to 7 because I thought maybe it was triggering burn on a 5 pull, and not mezzing as a result but that didn't solve it either. I've turned off UseChaotic and InterruptForMez, to try to see if that was a conflict, and still not working correctly.
The plugin output is just the one pull of the 5 mobs, you can see where it is unpaused before the pull, and it's reproducable as it's the first pull of the Rat mission, and all 5 mobs appear on autohater.
Expected action would be AE Tash, and AEMez, since UseAoE=Off, and they aren't damaging spells. Or is that configuration setting different for enc and I need to turn it on?
Thanks for the help, these plugins are fantastic!
I have AoECount=3, BurnCount=7
I'll attach a screenshot of the settings, as well as the plugin output showing not even attempting to Mez or AeMez until 2/5 are dead. Do I have something configured incorrectly? I've tweaked the BurnCount up to 7 because I thought maybe it was triggering burn on a 5 pull, and not mezzing as a result but that didn't solve it either. I've turned off UseChaotic and InterruptForMez, to try to see if that was a conflict, and still not working correctly.
The plugin output is just the one pull of the 5 mobs, you can see where it is unpaused before the pull, and it's reproducable as it's the first pull of the Rat mission, and all 5 mobs appear on autohater.
Expected action would be AE Tash, and AEMez, since UseAoE=Off, and they aren't damaging spells. Or is that configuration setting different for enc and I need to turn it on?
Thanks for the help, these plugins are fantastic!
Attachments
well, that depends.
we use animations to check for if mobs are mezzed are not - some mobs have borked animations so we can't detect, unfortunately not much to do in this case if they're in a state where they look mezzed but not
your aoecount has nothing to do with it
your burn count has nothing to do with it
we use the TargetRingAEMez, the PBAEMez if there are more than 2 xtargets
we use Chaotic or singlemez when there are two or fewer xtargets (or your ae mezzes gems are not ready)
I would check your mez ignores and ensure you don't have mobs ignored that you want to mez. (i know you said they aren't)
I would ensure you didn't make your xtarget window with a bunch of non-valid slots.
they need to be "autohater" and you also need to ensure you have your xtarget window set to automatically add targets
Autohater is set to auto in all 7 slots, I verified all 5 mobs were on the autohater when I switched over to Enc to see if it was casting mez and just being resisted. Ignores is empty in both boxes. In the output you can see it detects scavenger03 as it cast tash on it. But then it returns to nuking scavenger04 until it's dead, then attempts to mez scavenger03. So it is seeing that the mob is there on autohater, but is prioritizing nuking 04 instead of mezzing 03 or 04. Even if there was an auto-hater issue, the fact it uses tash, then returns to nuking a different mob and returns to the original to mez later seems like something isn't right? Unless this is one of the weird models where the animation is causing the issue?
can you echo out some animation numbers? or you can use the macro evaluation utility in the alt-~
either /echo ${Target.Animation} or ${Target.Animation} in your eval
respond back with some numbers (they'll likely change)
yeah 129 and 143 are used as mez animations in some places, so this would be why
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,141
Animations are different for different mob races/classes, I'm always interested in finding spawns that don't act as they are expecting to act animation wise so that I can keep the mez animations properly documented so that I can account for as many scenarios as possible. Unfortunately there's a ton of mobs, and being able to test them all personally can be a hassle for sure. If you share which spawn it is then we can look at that specifically. You said "Scavanger04" or whatever. There's only two that show up even having "Scavanger" in the name, and both are in the same zone. If you can confirm the zone and full name of the mob in PM or here or whatever so that these can be looked into it would help to make it hopefully work better in the future.
Twinkeltoes
Active member
- Joined
- Jan 8, 2022
- RedCents
- 698¢
Searched and couldn't find anything. For some reason my enchanter likes to move around and be close to mobs, and yes UseMelee is turned off. I'm not sure why she doesn't stay put like my other casters.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,144
Hylander is correct. If they are in the camp radius and you lack line of sight to mez, the enchanter will move toward the mob with nav until Line of Sight is obtained so that they can mez the mob.
Twinkeltoes
Active member
- Joined
- Jan 8, 2022
- RedCents
- 698¢
That's what I was thinking at first. But all her spells are range 200 (254) so I'm not sure why she would move for mez. It might be a LoS issue. But it looked to me there shouldn't be any LoS problems with her and the rest of the casters did not have LoS issues, and they all group around each other.
My tank's camp radius tends to be between 30-60 so everything should be in her range.
they move specifically for line of sight as cwtn/hylander mentioned - not for range
Q. My enchanter is sometimes moving to do stuff when I don't have usemelee on?
A. If you are in any mode other than manual mode, you will move to mez if you don't have line of sight and the mob is in your camp radius.
mq2 enchanter knows nothing and doesn't care about your tank's camp radius
Faazed
Clearly Not of This Planet
- Joined
- Dec 6, 2020
- RedCents
- 1,488¢
I now have to have my chanter on Melee Mode on , otherwise she likes to run off into the sunset and stand in new places if on manual, if on assist she likes to do a zone-wide run for seemingly exorcise purposes, not to come back until the mob is killed. Fortunately I just put AA's into Enchanter Tripple Attack with a 2h so now it makes sense to have her attacking.... before you ask where is that aa I am firmly kidding.
sounds like you have either a: a conflicting macro running or b: you have followme stuck on on some other character or c: you have a wild and whacky mesh that runs you all over
we only run back to our own camp after fights, we don't run anywhere that is not our camp / ma --- so there's nothing where we would run to one spot of the zone, then run across the zone to do stuff and then come back - unless for some reason you made your campradius stupidly large, which is also a bad idea.
Faazed
Clearly Not of This Planet
- Joined
- Dec 6, 2020
- RedCents
- 1,488¢
Two zones with notorious bad meshes. In fact, didn't you and I already talk about specifically combat scar morweena camp? If not, yup, that is a zone that can have nav issues due to your mesh.
Twinkeltoes
Active member
- Joined
- Jan 8, 2022
- RedCents
- 698¢
for me, it is in some zones like BloodFields and Shadow Valley that pathing is extremely screwy. my chanter runs around all over the zone. I've gotten to the point where if I"m able to I shut her mez off and just have bards mez. But typically I only use her in same group as bards if I have a huntr raid going on where I want to get everyone an achievement.
might want to fix your mesh if you're experiencing screwy pathing
@Sic Quick question about MQEnchanter, if I may. Because my enchanter is only mid-level, I had a question about spells, missing spells, and spell gems. I was curious if the plugin logic is such that for each spell gem there is an associated "spell class" and then the highest known from that class is loaded? For example let's say gem #1 is single target mez, and the highest available for the current enchanter level is XYZ, but the enchanter only has in his spellbook ABC which is lower level than XYZ, will MQEnchanter load ABC in the gem slot and then report to the player "Yo dumb ass. You need to buy spell XYZ."?
I guess that could be a universal question across all the CWTN plugins. Will the plugin load the highest available "known" spell but inform the player that they need upgrade spells. Oh second question just came up. Will the plugin also offer advice as to missing AA's/recommended AA's/
Thanks for the help.
I guess that could be a universal question across all the CWTN plugins. Will the plugin load the highest available "known" spell but inform the player that they need upgrade spells. Oh second question just came up. Will the plugin also offer advice as to missing AA's/recommended AA's/
Thanks for the help.
what?
have you used them? they do all of these things.
if you're interested in trying them out, they are included for the test server with your RG lvl 2
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
re aa: - no get your AAs, it will use what you can, but you should, in fact, get them all.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,160
I would absolutely test copy and check out all the plugins and make sure they're what you are after. It sounds like they are since all the things you're asking for are already a thing in the plugins with the exception of recommended AA's. Honestly, with autogrant being a thing it's pretty hard not to have AA's you should have at least at some level once you're high enough to own them.
The plugins being free on the test server is 100% geared towards players like yourself who would love to try them prior to committing to making a purchase.
Keep in mind that every plugin has it's own nuances and checking the FAQ page for each resource is highly recommended.
Here is the FAQ for the Enchanter plugin.
Combat Assist - MQ2Enchanter - Extra info
www.redguides.com