• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Enchanter

Plugin - MQ2Enchanter (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (117) Reviews (34) History Discussion Terms and conditions
Will i need to do this for all my spells on the silver accounts or just the ones that are buffs?
 
Turaj Steelfist said:
Will i need to do this for all my spells on the silver accounts or just the ones that are buffs?
Click to expand...
that's a good question. the buffs are obviously going to be an issue, but the plugins will likely still try and cast the wrong spells for anyone who has rank2+ spells and who went silver.
 
OK thanks for the knowledge. I will most likely go gold for a month, enc and shm could use more AAs anyhow. Maybe you awesome programmer types will have a fix for it soon. I wish programming didn't look like Greek to me.
 
For some reason my enchanter will not work the settings options never appears. I have other chars that are fine but I have been having trouble with this enchanter for a long time.
any help will be appreciated. ty
 
Mamawolf said:
For some reason my enchanter will not work the settings options never appears. I have other chars that are fine but I have been having trouble with this enchanter for a long time.
any help will be appreciated. ty
Click to expand...
hi mamawolf,

is this for mq2enchanter? you didn't post in the mq2enchanter thread so i don't know. (but assuming as it is in plugin section so i merged it)

Make sure you check out the stickied threads that go over mostly all the stuffs.

> Getting Started With the CWTN Plugins Including UI stuffs <

Here is the UI thread:



MQ2Enchanter Commands
you can /enc show


You also appear to be on the old mq2 "legacy" and i would strongly encourage you to upgrade to macroquest "Next" ASAP > Guide <

as mentioned in the sticky thread > here < ToL spell upgrades are in the Next version only
 
I am very familiar with these plugins.. and I have the Mez box checked... but for some reason Ench will not mezz. I watched the video and combed and combed things and cannot figure out why.. Any direction I can be given as to
help figure out why?
 
lukenbill941 said:
I am very familiar with these plugins.. and I have the Mez box checked... but for some reason Ench will not mezz. I watched the video and combed and combed things and cannot figure out why.. Any direction I can be given as to
help figure out why?
Click to expand...
what mobs specifically? i ask because we use animations to check for things, so it is possible that a new mob/model has an idle animation that we think means it is mezzed.

also as always, would want to check your mezz immunes, especially if you have it set to auto mez immune.

also you're on "legacy"

> 100% would suggest upgrading to macroquest "Next" asap.<

you might still be using old mez spells which don't mez the level of mobs you're fighting
> Plugins not using new spells? <
 
Last edited:
Ohh possibly, it is in the new Vex Thal. The Ahkeva models. Not sure about the Shades, not fighting those ATM.
 
lukenbill941 said:
Ohh possibly, it is in the new Vex Thal. The Ahkeva models. Not sure about the Shades, not fighting those ATM.
Click to expand...
i edited with some more information, please double check that as well.

it is also likely that you're using old spells because you're on legacy and aren't using spells that can effect the level of mobs you're fighting.
 
The_Klaw said:
My chanter keeps loading Psychosis as a nuke instead of my new Ancient: Neurosis nuke.
Click to expand...
they aren't the same spell line. psychosis is a timer 1 spell and neurosis is a timer 2 spell line.

Without going through everything to see what is timer 2, i don't think we use the timer 2s at all, we definitely don't use any of the ancients in the lineup.

I can take a look sometime later, if we want to incorporate these into the chromanuke line

redeqcrap said:
Have you moved to next?

Click to expand...
while i appreciate trying to help not only is the The_Klaw on next, but what you said has nothing to do with the spells he is asking about :(
 
jmastema said:
I like this plugin so much I bought and I don't think I have an enchanter.
Click to expand...
maybe the chanter you have is just so good that he does his job and you never hear from him so you forget that he's there.

then he is waiting for "pappa" to tell him how proud of him you are, but since you forgot, you never do, and then he gets sad.

he gets bitter as he gets older, and the corruption fills his soul and then he comes after all of us in our sleep
 
Sic said:
maybe the chanter you have is just so good that he does his job and you never hear from him so you forget that he's there.

then he is waiting for "pappa" to tell him how proud of him you are, but since you forgot, you never do, and then he gets sad.

he gets bitter as he gets older, and the corruption fills his soul and then he comes after all of us in our sleep
Click to expand...
Be a great story arc for the next expansion
 
Great plugin ! Is there a way I can modify the ability or way my enchanter is pulling? Currently set to PullerAssist mode and is pulling with a melle attack, but would like to set it to pull with tash. Thank you again
 
Everquest112233 said:
Great plugin ! Is there a way I can modify the ability or way my enchanter is pulling? Currently set to PullerAssist mode and is pulling with a melle attack, but would like to set it to pull with tash. Thank you again
Click to expand...
it pulls with tash unless you "disablepullability" - if for some reason it can't get los, it might still go up to pull, but when you load the plugin it will tell you what its pullability is

However, i need to update the "pullability" to work with the tol version "edict". so if you're asking about new spell, then yeah that needs an update
 
I think that could be it, I've never used my enc to pull before and hes lvl 120. I've tried clicking a few different options but it seems to pull with a melle hit which isn't bad, its breaking mezed mobs in order with it too which is great.
Thank you again
 
Hello all,

I'm still pretty new to the CWTN plugins. I am using the plugins for SK, Shaman, Cleric, Mage, and Enchanter, the Wizard is using KA. To date, I've played the SK in Mode 7 for everything. If I want to drive and pull with my enchanter, would I set the mode to 6 or 7 and put the SK in Mode 4? Right now I have the SK set to MT and MA. Would I still keep the MT and MA set to SK? When the Enchanter returns to camp, I assume the SK would pick up the mob and do tank stuff and the Enchanter would do Enchanter stuff?

Thanks in advance for any assistance.
 
The enchanter determines what they should mez based on what ISN'T targeted by the MA. So being the MA on the enchanter will cause issues with mezzes. Not to mention with the Enchanter assigned as the MA could also cause issues with SwitchWithMA if you assigned MT to the SK and then had them on ChaseAssist with AssistAt set to 100. Finally, if the enchanter does switch targets to mez, the idea is that they would reaquire the MA's target and resume combat. Which they can't do if they are the MA. It means if they switch and somehow did mez the mob, they wouldn't switch off that mob and thus would break the mez they just casted. The enchanter is designed as a support role and is not intended to be the driver for those reasons. I recommend considering these issues moving forward when you determine who should pull, who should be the MA, and how you would like your group to act.
 
My enchanter keeps casting tash and doesn't dot or dd the mobs which makes her useless what do i do to fix it she has all 120 spells and she is 120
 
Fyrepheonix17 said:
My enchanter keeps casting tash and doesn't dot or dd the mobs which makes her useless what do i do to fix it she has all 120 spells and she is 120
Click to expand...
that's not much information to go on. is the mob tashed? is your server lagging and your debuffs on the mob aren't populating like normal?

you can turn off usetash if you want to not use tash

you also appear to be using legacy mq2? you should definitely consider moving to next, as there are no spell updates for 116+ on legacy
 
Thanks CWTN for the quick reply. Perhaps I titled this incorrectly. I just want to be able to pull with the Enchanter? I was intending to leave the MT and MA set to the SK. In order to do that, what mode would I place the enchanter in and what mode should the SK be in? Or from your comments, I should not attempt to pull with the enchanter period? Would I be able to do this if I replaced the enchanter with a bard running KA? When I played a long time ago, I used a bard as my main, so I'm fairly familiar on how to play. Not so much the SK, but I'm learning.
 
If you only want to pull with the chanter (and presumably switch back to SK once back in camp), I'd think either manual mode (sorry I don't remember the number) would work and change back once in camp or you could just pause while you pull and unpause when you get back in camp. It's easy enough to hotkey this I believe with /enc pause on and /enc pause off
 
Seafox said:
Thanks CWTN for the quick reply. Perhaps I titled this incorrectly. I just want to be able to pull with the Enchanter? I was intending to leave the MT and MA set to the SK. In order to do that, what mode would I place the enchanter in and what mode should the SK be in? Or from your comments, I should not attempt to pull with the enchanter period? Would I be able to do this if I replaced the enchanter with a bard running KA? When I played a long time ago, I used a bard as my main, so I'm fairly familiar on how to play. Not so much the SK, but I'm learning.
Click to expand...
you would leave the SK in a tank mode (assigned group main tank and group main assist) if you wanted it to tank mobs that entered camp that were on xtarget.
 
So I just downloaded this plugin and I can not seem to get it to load. I stared with VV live and recently converted to Next, so I have 2 directories. The original release version and now the new directory for MQNext. I placed the mq2enchanter.dll in both the mqnext\plugins and also the release directory. Rebooted and loaded the plugin while having "live" selected on the launcher because that was where the plugin showed up to load. It does not show up on the plugins tab when I change to MQNext. When I try to load the plugin in game, it gives me the following error. What did I do wrong?



EDIT 5 min later - Just launched EQ from Live instead of MQNext and the plugin loaded and she came alive instantly!!!!!!! I guess the cwtn plugins dont work with MQnext yet?
 
Last edited:
There is sticky in the CWTN plugin section, explaining it can take up to 4 hours for it to sync and be availible.

Also, uhh shouldnt be moving stuff around manually with the CWTN files... unpleasant things could/will result.
 
The dll that is posted in the thread is not up to date. The redguides patcher will provide the current version of the dll and put it in the correct directory. Please check the plugins section of the patcher and confirm that you see the plugin there.

For next, the licenses sync from VV to next every 4 hours, so patcher may not know about your license for the plugin on next for a few hours.

Note: the plugins are not compatible between VV and next, they are two different platforms. You should move to next for all the new features.
 
redeqcrap said:
The dll that is posted in the thread is not up to date. The redguides patcher will provide the current version of the dll and put it in the correct directory. Please check the plugins section of the patcher and confirm that you see the plugin there.

For next, the licenses sync from VV to next every 4 hours, so patcher may not know about your license for the plugin on next for a few hours.

Note: the plugins are not compatible between VV and next, they are two different platforms. You should move to next for all the new features.
Click to expand...
I forgot about the delay with the patcher. I unzipped it in the MQnext folder from the download, but the plugin does not show yet. I guess I need to wait until it shows up.

So no more need to look at the live option., Just stay with mqnext
 
Psy said:
So I just downloaded this plugin and I can not seem to get it to load. I stared with VV live and recently converted to Next, so I have 2 directories. The original release version and now the new directory for MQNext. I placed the mq2enchanter.dll in both the mqnext\plugins and also the release directory. Rebooted and loaded the plugin while having "live" selected on the launcher because that was where the plugin showed up to load. It does not show up on the plugins tab when I change to MQNext. When I try to load the plugin in game, it gives me the following error. What did I do wrong?

View attachment 36000

EDIT 5 min later - Just launched EQ from Live instead of MQNext and the plugin loaded and she came alive instantly!!!!!!! I guess the cwtn plugins dont work with MQnext yet?
Click to expand...
you can't willy nilly move files around from mq2 to next.

there is a stickied thread that explains the next licenses sync every 4 hours.

1639848775663.png



this means that you manually dragged files around - don't do that. let the launcher handle it.

also, please post in the correct location. mq2enchanter question goes in the mq2enchanter thread.


Make sure you also check out > Getting Started With The CWTN Class Plugins Info <
 
Sic said:
you can't willy nilly move files around from mq2 to next.

there is a stickied thread that explains the next licenses sync every 4 hours.

View attachment 36001



this means that you manually dragged files around - don't do that. let the launcher handle it.

also, please post in the correct location. mq2enchanter question goes in the mq2enchanter thread.


Make sure you also check out > Getting Started With The CWTN Class Plugins Info <
Click to expand...
Sorry...feeling like an idiot here, but I'll get it!!

I unzipped the mq2enchanter into the directory I installed next into (VVMQNext) and into the plugins directory. I assume thats where they go and then just wait up to 4 hours for the launcher to show the plugin?

I only unzipped it into the old release folder because I was afraid next was still using files from there. Sounds like I just need to ignore the release folder from now and only use the VVMnext folder correct?
 
Psy said:
Sorry...feeling like an idiot here, but I'll get it!!

I unzipped the mq2enchanter into the directory I installed next into (VVMQNext) and into the plugins directory. I assume thats where they go and then just wait up to 4 hours for the launcher to show the plugin?

I only unzipped it into the old release folder because I was afraid next was still using files from there. Sounds like I just need to ignore the release folder from now and only use the VVMnext folder correct?
Click to expand...
no, don't unzip anything.

use the redguides launcher


LAUNCHER

This thing.

if your next plugin isn't showing yet - that either means a: your license hasn't sync'd yet (0-4 hours, 6 times a day as mentioned) or you need to refresh your launcher.

but let the launcher handle downloading and moving files to the correct location.

manually downloading the mq2 file and slapping it in to your next install will not work. you are putting gasoline into a jet engine.

1639851081290.png

It has a "Plugins" tab.
 
You must log in or register to reply here.
Plugin - MQ2Enchanter
Next unread thread 🦁

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Back
Top
Cart

Cart

Total -