• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Bst

Plugin - MQ2Bst (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (103) Reviews (32) History Discussion Terms and conditions
Trevallion said:
Thanks for the explanation and the command to look at the height. For some reason, I was expecting the pet to be the same size relative to the characters (after shrinking), so I just thought the shrink wasn't working. After logging in just now, I can confirm the pet is 1.44, so if that's the correct size, that's what it should be. I did notice that when I manually hit the pet with the Diminutive Companion AA, the height afterward is .96.

Again, not a big deal, just thought it wasn't working as intended. Thanks for looking into it.
Click to expand...
some forms allow a different size with a "double shrink" than others. using the 1.44 is a "safe" way to not get stuck trying to spam double shrink something that won't take a double shrink. I personally hate the giant fat ass bear and other forms anyhow and i usually use one of the metamorph totems like the scorpion for visibility or the vitrik or similar if i want to be able to visually see their weapons.

I guess i could put together a list of all the pets and all the pet illusion forms to see that the highest double shink value is - but that is definitely not on the agenda atm.

if you had a pet form or pet illusion form that only went down to 1.66, yet tried to shrink anything above 1.50, for example, you would just spam it. unfortunately, that I'm aware of, there is no information that we can check like "max shrunk ass size" (but that would be awesome if we could heh)

so yeah, working as intended
 
Sic said:
some forms allow a different size with a "double shrink" than others. using the 1.44 is a "safe" way to not get stuck trying to spam double shrink something that won't take a double shrink. I personally hate the giant fat ass bear and other forms anyhow and i usually use one of the metamorph totems like the scorpion for visibility or the vitrik or similar if i want to be able to visually see their weapons.

I guess i could put together a list of all the pets and all the pet illusion forms to see that the highest double shink value is - but that is definitely not on the agenda atm.

if you had a pet form or pet illusion form that only went down to 1.66, yet tried to shrink anything above 1.50, for example, you would just spam it. unfortunately, that I'm aware of, there is no information that we can check like "max shrunk ass size" (but that would be awesome if we could heh)

so yeah, working as intended
Click to expand...
Thanks, Sic.

I spent the last 7 years as a developer, and I in no way would waste time on this. You've given me everything I wanted--an explanation for how it works and that it's working as intended. I have a workaround for the FAB (fat arse bear) with the AA, and you've given me another that I wasn't aware of. When I left, your pets were based on race and you got what you got. Sounds like there are cosmetic changes for them now that I didn't know about. Thanks for getting back to me and definitely don't worry about this as a development issue.

Have a good evening.
 
Trevallion said:
Thanks, Sic.

I spent the last 7 years as a developer, and I in no way would waste time on this. You've given me everything I wanted--an explanation for how it works and that it's working as intended. I have a workaround for the FAB (fat arse bear) with the AA, and you've given me another that I wasn't aware of. When I left, your pets were based on race and you got what you got. Sounds like there are cosmetic changes for them now that I didn't know about. Thanks for getting back to me and definitely don't worry about this as a development issue.

Have a good evening.
Click to expand...
Thanks Trevallion, appreciate the time you took to give the feedback!
You also have a good one
 
Hiya,

my 113 Bst doenst use any buffs (Focus,Talatak, Spiritual Insigt and other buffs).
Iam using MQ2Bst and all buffs like Focus are enabled...

Anyone has a Idea whats going wrong ?

Thanks and have a good one.
 
Drygon said:
Hiya,

my 113 Bst doenst use any buffs (Focus,Talatak, Spiritual Insigt and other buffs).
Iam using MQ2Bst and all buffs like Focus are enabled...

Anyone has a Idea whats going wrong ?

Thanks and have a good one.
Click to expand...
Did you watch the mq2bst video and check the faq?
you need to have cwtnbuffs running (which the plugin will load for you).

are you in byos? - you will not do spell gem buffs if you are in byos.
 
Hey Sic,

thanks for the fast response... yeah iam using mq2 since its released.. but startet on new server a new bst and run into this isue 2-3 days ago (l think around lvl 111 or so).
I have all the buff Plugins loaded (Kissbuff and CTWbuff) but he only buffs shared fero..

Any Idea ?
 
Drygon said:
Hey Sic,

thanks for the fast response... yeah iam using mq2 since its released.. but startet on new server a new bst and run into this isue 2-3 days ago (l think around lvl 111 or so).
I have all the buff Plugins loaded (Kissbuff and CTWbuff) but he only buffs shared fero..

Any Idea ?
Click to expand...
you do not need kissbuffs and you should unload it on all your characters.

yes i had an idea and i asked you a question you didn't answer. :p

are you in byos? - you will not do spell gem buffs if you are in byos. (unless they are memorized).

buffing also checks for stacking - so is it possible that you already have those buffs or better?
 
Hey,

kissbuff unloaded and iam not in BYOS Mode... spell gem loading is also stuck.. if i cancel a spell he doesnt reload it automaticaly...
 
Drygon said:
Hey,

kissbuff unloaded and iam not in BYOS Mode... spell gem loading is also stuck.. if i cancel a spell he doesnt reload it automaticaly...
Click to expand...
Please pm me your MQ2Bst_toonname.ini from your release folder
 
Im not sure if this plugin has the capability, but is there a way to set a char outside of group, but set to assist the groups main tank? Without being in a raid, im just doing group content.
 
Mysta said:
Im not sure if this plugin has the capability, but is there a way to set a char outside of group, but set to assist the groups main tank? Without being in a raid, im just doing group content.
Click to expand...
howdy Mysta
no, we don't have out of group assisting built in for the cwtn plugins at this time
 
Sic said:
howdy Mysta
no, we don't have out of group assisting built in for the cwtn plugins at this time
Click to expand...

No worries, bst will be in group soon...just trying to push extra deeps =D still an amazing plugin!!
 
Mysta said:
No worries, bst will be in group soon...just trying to push extra deeps =D still an amazing plugin!!
Click to expand...
Depends how your doing it, If the bst is out of group, set it to "slow all" and tank mode, with reg groups MT on Xtarget as heals at 99-100%.. 99% of the time, it will agro and take care of business. CWTN tools are awesome, just have to get creative sometimes.
 
Just join redguides. immediately, purchased mq2bst. Loved everything about it. but i am looking around, dont seem to find "Pet Pull" command. is there such thing on mq2bst? or will it be possible to add it in later? Just a note. i know nothing about programming, so if is impossible. Please excuse my ignorant. Thank you for your great service to the community.
 
jchk said:
Just join redguides. immediately, purchased mq2bst. Loved everything about it. but i am looking around, dont seem to find "Pet Pull" command. is there such thing on mq2bst? or will it be possible to add it in later? Just a note. i know nothing about programming, so if is impossible. Please excuse my ignorant. Thank you for your great service to the community.
Click to expand...
howdy @jchk Welcome to RedGuides

there is not pet pulling, and likely won't be at least any time soon.
 
I am here to say, this is super awesome... been using this like crazy... is soo well written and easy to use. I already purchased all that can be paid for... I will find time to test them all out.... but using the two that I used daily... already feels is amazing. I am really looking for the rest of the class you will release (Hope is near future). I will be extremely happy and willing to paid for them. Maybe you can sell them in a full package or something in the future =D hahaha =D really really awesome, thank you.
 
Stupid question. Is there a way or a command to save my current setting? so I don't need to reclick everything, everytime I log on?... today the server keeps going down so have been resetting alot =D so just asking if that is even a choice... hahaha
 
If you click settings in the windows, it acts as "hotswap"
To save the settings, you have to use the commands to change the settings.
Like /bst useaoe on, will save the AoE use on the beastlord.
 
jchk said:
Stupid question. Is there a way or a command to save my current setting? so I don't need to reclick everything, everytime I log on?... today the server keeps going down so have been resetting alot =D so just asking if that is even a choice... hahaha
Click to expand...
Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10<
 
Prolly know already,
Loaded in today and went and bought the new spells, and bst window says Venomous Coalition from Alliance is not a valid spell!! Please report to CWTN
 
I keep crashing when I try and use assist mode. As soon as the BST starts attacking, it crashes. I looked through the discussion and coudlnt find a solution to the problem.
 
Not sure if is my computer alone or about the last patch update. Seems like after the last update my removeillusion button doesn't remove illusion anymore. anyone else having the same issue?
 
N
jchk said:
Not sure if is my computer alone or about the last patch update. Seems like after the last update my removeillusion button doesn't remove illusion anymore. anyone else having the same issue?
Click to expand...
No issue here. Its a cwtn commons setting across all the plugins and all plugins are removing illusions as expected.

What illusion isnt being removed?
 
Last edited:
jchk said:
Shammy, group werewolf. Not removing it... I have to do it manually.
Click to expand...
Weird - removing pact of wurine
1607787749426.png

but definitely not removing group pact of the wolf (i always block that on everyone so i never noticed).

I'll look into it - thanks for the followup @jchk
 
@jchk - ah I know why.

So despite not saying so, Group Pact of the Wolf Form actually gives you a cha mod - this is the same style illusion you would get from a mission/quest that makes you a "gnoll" or a "bixie" or w/e so you can be their faction and receive their modifier. We intentionally don't remove these illusions as it might give a headache when you're trying to do a quest/mission and are given one of these illusions.

I have a way of adding this illusion specifically to the remove illusions and i'll touch base with cwtn, but i don't see any reason why we can't make it remove this as well since its clearly not related to a mission/quest/faction
1607790596668.png
 
Ahh! I see, Thx for the super fast update Sic! Tip my hat off to you, good Sir!
 
Sic said:
are you getting a .dmp?
Click to expand...

A little error message pop up? If thats what you mean, no. It just crashes and goes away.

I've noticed its definitely only when a mob is engaged. All my other apps from you work fine with no issues, so I don't understand whats going on with MQ2BST.
 
shakin_bakin said:
A little error message pop up? If thats what you mean, no. It just crashes and goes away.

I've noticed its definitely only when a mob is engaged. All my other apps from you work fine with no issues, so I don't understand whats going on with MQ2BST.
Click to expand...
yes, a box would pop up and put a .dmp file in your mq2->release->logs folder - pm me those files if you had any - they would be mq2bst blah blah blah .dmp

no .dmp file is pretty tough to try and figure out what's causing it. just about impossible without being able to reproduce it
 
not sure if there is somthing i am missing but my bst is just chain casting Astounding Velocity, new to bst class so i maybe doing somthing wrong with it. i have unloaded the plugin then loaded it back up got ride of pet and re-summoned. Thank you for reading this!
 
Iindian said:
not sure if there is somthing i am missing but my bst is just chain casting Astounding Velocity, new to bst class so i maybe doing somthing wrong with it. i have unloaded the plugin then loaded it back up got ride of pet and re-summoned. Thank you for reading this!
Click to expand...
well, you're going to have to provide a little more information.

is the spell landing on your pet?

someone mentioned in another thread that eq is busted atm and buffs aren't actually landing like it should. so if its not landing, and spell is ready, then we're going to cast it.
 
ok nm sorry, i didnt notice that my account went to Silver and when it did that my Bst just kept casting Rnk 2 but only rank 1 was going on the pet so it thought it didnt have the spell on it. thank you sorry about that!
 
Looked up but cant see wher anyone posted this.

Today when i started playing my bst account keeps crashing, zerk account is on that computer and runs fine. have rebooted computer, reset VV. Unloaded plugin and reloaded it, but inside of 20 mins he crashes again.
 
You must log in or register to reply here.
Plugin - MQ2Bst
Next unread thread 🦁

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Back
Top
Cart

Cart

Total -