• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Bst

Plugin - MQ2Bst 3.1.52471.11

i am having an issue where bst is spamming focus on himself over and over trying to overwrite old focus that has 58 minutes left
 
i am having an issue where bst is spamming focus on himself over and over trying to overwrite old focus that has 58 minutes left
its been discussed here quite a few times - there is still an issue with mq2kissbuffs after dying/zoning sometimes where it thinks you need buffs - if you manually click off a buff on the character it is trying to cast upon it will stop. there will be an update to mq2kissbuffs soon.
 
Thanks for the support man. Appreciate you always being on it.
I'll be having some good paragon updates coming here in the next patch or two, including the ability to end/mana levels for both para and focused para.
I also squashed this current bug of not casting it when it should
 
nice plugin..loving it

as ppl said, my bst keep casting focus on baby cleric but it wont land cause she's low level (lvl 96 so i guess it wont land on her)
 
nice plugin..loving it

as ppl said, my bst keep casting focus on baby cleric but it wont land cause she's low level (lvl 96 so i guess it wont land on her)
you can either bst usefocus off or just click off a buff on the cleric so mq2kissbuffs corrects itself - 96 is high enough to have buffs that stack on you land
 
weird...i was pretty sure he was recasting because it wasn't landing on cleric...gonna check out again later
 
any know why the bst seems to run out and chase the tank when the tank pulls randomly? i cant figure out what hes trying to do when i see the bst run out there after the tank. bst is in assist mode also
 
any know why the bst seems to run out and chase the tank when the tank pulls randomly? i cant figure out what hes trying to do when i see the bst run out there after the tank. bst is in assist mode also
hrm - if you had a too large campradius and assist set to 100, i guess its possible he runs out sooner than you'd like

what is your campradius and assist set at?
 
campradius is at 40
assist at 97
hrm that's pretty weird - and you're in mode 1

I'm assuming the mob outside of that 40 when you're saying you're running out there?

you're not running any macros with it are you?
 
yea in mode 1, the bst goes chaseing the tank when he goes to pull so yea outside of the 40, no macro running
 
yea in mode 1, the bst goes chaseing the tank when he goes to pull so yea outside of the 40, no macro running
hrm, trying to think, but i'm stumped - i've not seen that and i run my bst every day.

do you have any thoughts on what might be happening when that happens?
 
Did you hit /follow by accident? Some of my toon still have that social from isboxer and sometime I accidentally hit the hokey and my toon would follow my bank.
 
Is there a reason this plugin is not having my beast cast shared ferocity or the dissident lines? I've searched this thread to see if I saw an answer anywhere, but I did not see anything (but im more than likely blind). As of now, the beast doesn't cast either one of these and I know beasts normally keep those 2 buffs up as much as possible. I did not see anywhere in the /bst showsettings it talking about ferocity or dissident line.
 
no follow i havnt changed any thing with the bst i think hes trying to cast a buff on the tank who is my puller in this situation
 
no follow i havnt changed any thing with the bst i think hes trying to cast a buff on the tank who is my puller in this situation
that's pretty strange still - because he won't move anywhere to cast a buff on someone
 
Is there a reason this plugin is not having my beast cast shared ferocity or the dissident lines? I've searched this thread to see if I saw an answer anywhere, but I did not see anything (but im more than likely blind). As of now, the beast doesn't cast either one of these and I know beasts normally keep those 2 buffs up as much as possible. I did not see anywhere in the /bst showsettings it talking about ferocity or dissident line.

No changes have been made to dicho/dissi / sharedfero/fero lines - here's my new 110 beastie casting them
1587803080995.png
 
For whatever reason my 115 beast is not casting either one, and doesn't even mem the spells at all. I have byos off
ah - I didn't know you didn't have it memorized - you likely have the bug right now to do with mending - do a /bst usemending off for now - this was a new bug that i created but already patched internally and will be fixed next time VV builds (1. issue where it wouldn't memorize what it should if usemending was turned on, and 2 use mending was defaulted on)
 
how do you turn off the AA feralist's unity AA, I have been looking for it, because if your invis and you zone it makes you lose invis as soon as you land.
 
how do you turn off the AA feralist's unity AA, I have been looking for it, because if your invis and you zone it makes you lose invis as soon as you land.
what's weird is that buff is nested in an I am not invis check - I may have to add the zone timer to delay before checking buffs as despite the server thinking that you are fully loaded in, it thinks you are uninvis before your buffs are re-applied
 
What does the usebandoswap do? I just found a 2hander for my beasty so I made 2 save on my bandolier for dual wield and 2hander. Then i turned on swapbando option but it doesn't seem to be doing anything with it.

Nm, restarting the plugin seems to have it swapping for vindication.
 
What does the usebandoswap do? I just found a 2hander for my beasty so I made 2 save on my bandolier for dual wield and 2hander. Then i turned on swapbando option but it doesn't seem to be doing anything with it.

Nm, restarting the plugin seems to have it swapping for vindication.
its in the FAQ section


Q. What is BandoSwap?
A. BandoSwap will check your bandolier sets for a 1h or h2h set (or combo of those), and check if you have a 2h set (it goes top to bottom in the list, no need to name it specifically).
When you are outside of "Vindication" you will keep using your 1h/h2h set, but during Vindication you will swap to 2h set for those sweet extra melee hits
 
Couple items didn't make it into this build, so some updates i've been talking about won't be seen until next update. (like paragon updates)
 
Something changed in the last two released versions, bst is now getting stuck chain casting Warder's Unity over and over (Yes I have tried unloading and reloading kissbuffs.
 
Something changed in the last two released versions, bst is now getting stuck chain casting Warder's Unity over and over (Yes I have tried unloading and reloading kissbuffs.
Sorry for the troubles man, I don't have any suggestions outside of the kissbuffs thing - the way we handle buffing is finding reasons to NOT buff - we check that the ID of the entity we're trying to buff is in the kissbuffs file, and then we check the file for what buffs they have and compare that to what buff we're trying to cast on it - if they don't stack or they have it blocked, or they already have it, we skip it --- I just helped another user with a similar situation, and he ended up logging out, and emptying the contents of the kissbuffs file and then logging back in and it cleared it up - tho we're going to make an on zone timer that waits until after we're fully loaded in the zone before checking stuff as that appears to also be a problem with some other stuff (like thinking you have no mana because the server.

the kissbuffs isn't the end-all-be-all solution for how we handle buffing, we just wanted to play nice with kiss characters - Eventually we won't write/read it to a file at all - but we need to be able to communicate with toons who are not using cwtn plugins and such
 
How do you disable the Feralist Unity AA use? Currently if you zone and it has worn off, it will recast the buff, but knock off your invis.
 
How do you disable the Feralist Unity AA use? Currently if you zone and it has worn off, it will recast the buff, but knock off your invis.

You asked this yesterday.

There is no way to not use that ability - We will be adding an on zone timer to make sure these things don't happen (this is eq taking too long to load your buffs)

1588202017541.png
 
Sorry about that, it never showed that I posted so I thought I never hit post, thanks for repeating it so I could find it.
 
Is there away for this plugin to assist outside the group? Something like /bst mainassist name?? That will I'm enable you to type who you want to assist lock that name and save it??
 
Is there away for this plugin to assist outside the group? Something like /bst mainassist name?? That will I'm enable you to type who you want to assist lock that name and save it??
Not at this time
 
hey! I just happen to have this one problem with mq2beast, everything else seems to work really well, but for some reason my beastlord doesnt want to mem slow spell, even tho I have Slowall toggled on, any way to fix this? thanks!
 
hey! I just happen to have this one problem with mq2beast, everything else seems to work really well, but for some reason my beastlord doesnt want to mem slow spell, even tho I have Slowall toggled on, any way to fix this? thanks!
slow all uses from the AA, or if you are byos and mem a slow spell (or before we get maelstrom at like 90)
i explain that in the video i posted

what lvl are you?
 
just got lvl 90
i am afraid i havent got maelstrom yet :/ and AA slow is bit higher level i suppose?
 
just got lvl 90
i am afraid i havent got maelstrom yet :/ and AA slow is bit higher level i suppose?
well we get maelstrom at 90, which is when it starts not-memorizing slow - but it puts your slowspell in your gemslot 1 starting with drowsy at lvl 20
 
Plugin - MQ2Bst

Users who are viewing this thread

Back
Top
Cart