• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2BerZerker

Plugin - MQ2BerZerker (3 Viewers) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (48) Reviews (54) History Discussion Terms and conditions
Medic181 said:
I ran a test again last night, and unloaded and loaded aasornd and had the same issue only on the zerker. All other toons purchased AA’s as set forth by aaspend, but the zerker banked 230 and stopped getting new AA’s. Like I said earlier it was working fine before the last launcher update, not sure what changed and just looking for help.
Click to expand...

Redo the settings for mq2aaspend and see if that helps.

/aaspend bank 210 (I don't do the full 230 because it seems like that can mess stuff up sometimes)
/aaspend brute on (or use whatever spend method you want... I like brute because I just want everything purchased)
/aaspend save

If you re-do that on each toon and you're still having issues, then that would be something to bring up in the MQ2AAspend discussion topic (or make a new thread to discuss).
 
Anyone else seeing their zerk(s) running around like idiots? Back and forth like mad during and after a fight. If I tab over they immediately stop.
 
Turn up your background FPS in the Options menu under advanced settings. to at least 24-30 range or use MQ2EQWire and turn up background FPS also if you're worried about CPU Usage.
 
Saffron said:
Anyone else seeing their zerk(s) running around like idiots? Back and forth like mad during and after a fight. If I tab over they immediately stop.
Click to expand...
I had this problem early on in EW and GD with some mobs warping halfway across zone. Turned UseStick off in the setting and have not had an issue since.
 
Qulemac said:
I had this problem early on in EW and GD with some mobs warping halfway across zone. Turned UseStick off in the setting and have not had an issue since.
Click to expand...
I will try that thank you as it is not a fps setting issue. My other toons don't act like idiots, just the ber.
 
Ran into a little issue the last 2 days....everything prior to this was working well.

I have 2 zerkers in my group - and they just sit there and will not engage the mob. I have then both set and they are set to assist.

Again, happening only the last 2 days - if I hit the Melee button - then a self made hotkey assist button they jump in..... But sit back down and wont budge again.

Any ideas ?
 
I have to change my radius to the max, 99, almost every other day. Sometimes the setting saves other times it doesn't.
 
would it be possible to have your plugins auto set to mode 0
if they enter lobby, guild hall, plane of knowledge or plane of tranquility, nexus anything to get rid of assist mode automatically if they end up there
alternatively was thinking of making a config file to do that
there are definitely a ton of scenarios where auto mode to 0 would be nice (or vorpal) if for any reason the toon leaves X distance from original camp spot
 
Saffron said:
I have to change my radius to the max, 99, almost every other day. Sometimes the setting saves other times it doesn't.
Click to expand...
Wait...camp radius max is 99? Hmmm I set my camp radius on my monks to 200 as they were not assisting the warrior if he was just a bit away from them and it let me?
 
radius and camp radius are not the same things.

CampRadius = the radius of the camp in which you will engage a mob that enters that radius after they've fallen below or equal to the autoassistat value.

Radius = the radius to use for pulling.

Not to be confused with each other.

A camp radius of 99 is actually pretty big. A radius (pulling) of 99 can be considered quite small.
 
automatically taking people out of any mode and putting them into manual mode where their character will just stand around is not something I'm interested in doing. If you don't want to have a camp set, change your mode yourself. I'm not looking to try to read peoples minds.
 
Camp radius also depends on the type of mob your fighting, for most things I keep it small 30-40. But the stupid dragons and worms in ToV require at least 70 I have found because of their reach but limited hit box.
 
ChatWithThisName said:
It's possible the file that stores the size of the window is jacked up. If you go into the release folder where all the .dll files are stored, you should fine MQ2BerZerker.ini file, not to be confused with MQ2BerZerker_Charname.ini

If you delete the MQ2BerZerker.ini file, then it will allow the plugin to generate a new default location for the window.

You should make sure to unload the plugin first before doing that to prevent it from saving it's current location.
Click to expand...

So I am having this same problem. I removed the ini file and no luck. So then I completely removed it and reinstalled mq2berzerker. It still shows up minimized and wont expand. I am running isboxer in conjution with mq2. Is there something that isboxer is doing to stop this from opening?
 
There is not assisting out of group logic built into the plugin. You'll have to use something else to manage out of group assisting, such as KissAssist with
INI: 
[Melee]
UseMQ2Melee=0

the DPS/Buff section etc should be blank
 
It would be nice to be able to issue a command say /dps mode 1 to put all the DPS classes into that mode when running multiple classes that your plugins support.

It's getting to be a pain to need to modify my hotkeys when switching out zerks, monks, rouges and bl's.
 
drawthow said:
It would be nice to be able to issue a command say /dps mode 1 to put all the DPS classes into that mode when running multiple classes that your plugins support.

It's getting to be a pain to need to modify my hotkeys when switching out zerks, monks, rouges and bl's.
Click to expand...

Just run them all in manual mode with a blank kissassist file to handle the assist. Problem solved.
 
hellfyre said:
Just run them all in manual mode with a blank kissassist file to handle the assist. Problem solved.
Click to expand...
That would handle the issues I have had with the toons hauling ass back to some camp across the zone after dragging corpses to a different location.
 
My trick has been to make different hotkeys for the crew and berz. I will pause macros, berz to manual mode, come to me or follow me, when at new location, set new camp for all chars, unpause macros, and berz mode to assist.

If I forget, the berz will definitely haul ass lol, it's pretty funny and frustrating at the same time... I keep hearing him yell "Hulk Smash" as he runs... the good ogre berz I have.
 
This is just me figuring things out and working through things, I am sure there are better ways than the way I do things, but that's been working for me for now. I figured I would do 1 - 100 as my tutorial to MQ2 since it has been years since I used it last.
 
For those with zerks on spaz/idiot mode turning stick mode off fixes that. FPS doesn't seem to matter, mine is at 50 and they still dart around if stick mode is enabled. You do need to watch mobs getting aggro on someone and moving as your zerk will stand out of melee range if that happens. Still better than spazmode.
 
Put all DPS toons in mode 1
/noparse /bcaa //if (${Select[${Me.Class.ShortName},BER,ROG,BST,MNK]}) /docommand /${Berzerker.Command} mode 1

Put tank class in tank mode
/noparse /bcaa //if ${Select[${Me.Class.ShortName},WAR,SHD]}) /docommand /${Berzerker.Command} mode 4

Have everyone go to manual mode, stick to the group MA, turn off camphere, pause any running macros.
/noparse /bcaa //multiline ; /docommand /${Berzerker.Command} mode 0; /stick id ${Group.MainAssist.ID}; ;/camphere off; /mqp on

${Berzerker.Command} will automatically get your classes /command name, IE: Cleric is Cler, Warrior is war. berzerker is zerk rog is rog etc. But you have to use /docommand /${Berzerker.Command}

1579619632685.png

If there is no class command, it does an echo instead.
 
Last edited:
ChatWithThisName updated MQ2BerZerker with a new update entry:

Updates, Fixes, and misc things.

1/21/2020
Add DoCampfire option to automatically create campfires for you (without ever bringing up the window).
Add CampfireDistance option to set the Max distance from your current camp a campfire can be in the same zone.
Correct issue with seemingly random decision made by the puller to go on strike. The character was apparently
upset they had a buff that didn't stack with rez sickness.

1/18/2020
Group Shrink clickies will now shrink pets.
SwitchWithMA will...
Click to expand...

Read the rest of this update entry...
 
Note, if you plan to use the berserker to pull, don't use the plugin mq2headshot

It puts a last name under every mob name that you can decapitate and the pulling logic specifically excludes mobs with a last name.
 
Are all these plugins war/zerk/monk etc only valid for a one year purchase?
 
lol, i was just curious as i seen what im assuming is my expiry date, thanks for the info chat
 
anyone able to help me out, i lost the window for mq2berzerker and i cant get it to load back up. ive disabled and enabled exited and zoned and such but i cant get the ui interface back up. any advice?
 
drawthow said:
It would be nice to be able to issue a command say /dps mode 1 to put all the DPS classes into that mode when running multiple classes that your plugins support.

It's getting to be a pain to need to modify my hotkeys when switching out zerks, monks, rouges and bl's.
Click to expand...

make a hotkey /bcg //keypress 1
on the dps toons that may be logged on make hotkey 1 a social with /dps mode 1
main toon sends command , other toons respond , problem solved
 
You must log in or register to reply here.
Plugin - MQ2BerZerker
Next unread thread 🦁

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)
Back
Top
Cart

Cart

Total -