- Joined
- Dec 1, 2020
- RedCents
- 1,337¢
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.

Thanks on answer, is there a way to deactivate Tradeskill Depot, canT find the key to do it, any help welcome
View attachment 74601
Each resource on RG has an Overview / Discussion Thread and either a link to their wiki or tabs with FAQ, Commands, Etc.ok when i try to craft something usiing TCN its causing EQ to Crash, anyone else having issues like this?

In the settings on TCN you can uncheck the depot box and save the settings, now that I am looking at the code the flag for this don't make no sense..
View attachment 74602
So I will take a look at that, but still the underlying cause needs to be addressed (WIP). The sure 'fixes' are to use F2P without expansions purchased past ToL in the interim.
Ok so the depot flag is about returning things to the depot, grabbing things from the depot happens if auto-bank is on and the depot is enabled.
It has been awhile, so I probably came to the conclusion that people would 1000% want to grab things from the depot. I can look into putting in another flag, or repurpose the flag and make it so
the depot flag handles grabbing and storing.
Yes the depot box is for returning items to the depot, this decision was made 3-4 years ago and now I am reconsidering to add a new option or make it an AIO to return/grab.Are you talking about the Global Craft Settings? I don't see any other settings. I have Auto-bank off and still get crashes. I don't see a "depot box" to uncheck. If there is one, could you show me where, please? Maybe I'm being dumb!
There is a settings file per toon. Maybe it's there? It appears to be a series of numbers and I don't know what each number does.
Yes the depot box is for returning items to the depot, this decision was made 3-4 years ago and now I am reconsidering to add a new option or make it an AIO to return/grab.
there should be a box:
Auto-Depot
"Deposit items to depot automatically after crafting session complete."
The bank itself has 2 options one to auto-deposit and one to auto-grab *bank*.
1/25/2026
4.198b - ChangeLog
Modified: Auto-Depot, when this is checked it will now grab and deposit and also be used in calculations
However, if you request an item or use the quests it may crash as they are not in-line with the main sequence.
This is just a temp measure to get people going.
jb321 updated Tradeskill Construction Set NeXt with a new update entry:
Stop-Gap until depot issues are fixed.
Read the rest of this update entry...
No, if it is enabled it will grab and deposit, if it is unchecked it should craft normally for the user, if you do quests or request an item the results may not be desirable if checked.I don't understand but am happy to test!
I currently have a tradeskill depot on my main. He doesn't have Auto-depot enabled. Are you saying he should have it enabled now? Once I have the new version, I mean.
1/25/2026
4.199b - ChangeLog
Modifed: tcn_library,tcn_feeder,tcn_shoplist, all references from BIGB have been changed to BNK to reflect the xml change for BigBankWnd
Well, I am not sure if that is new because of the changes, or just new. I tried it on a non-depot toon and it is not crashing. So what I was trying to convey is the "fixes" were temp just to craft for depot issues, everything else is not tested for production.Still seeing a crash. I can run through recipes and load them properly, but now when clicking on the "missing" tab after generate mass list, it crashes on mq2lua.dll
---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:
Process ID: 51196
Version: 3.1.1.3587
Location: E:\VeryVanilla\MacroQuest\Release\Plugins\mq2lua.DLL+000000000009BD4D
CrashID: 5e52a572-0f6c-46e8-a94c-a57a1e51af72
You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.
Copy the contents of this dialog to your clipboard by pressing Ctrl+C
---------------------------
Retry Cancel
---------------------------
I have a suspicion I will revert my fixes, but retain the bank button changes, after all is said and done.Thanks for this
I downloaded the new version but haven't made the tweaks suggested above. I can confirm that my main can now use TCN again without crashing.
Caveat - I do have tradeskill depot on him but am not using any mats held in the depot and I have only tested basic crafting (no batch or use of "missing" tab). In any event, this covers most of my use of TCN and I am up and running.
I'm grateful for your efforts!
| File | Lines Fixed |
|---|---|
| cruncher.Lua | 45, 1005 |
| m_cruncher.Lua | 59 |
| tcn_feeder.Lua | 2457, 2514, 5284, 5719, 5776 |
| tcn_library.Lua | 758 |
| init.Lua | 2211, 3186, 3399, 4796 |
Has requesting items from a toon been tested for this when the remote toon has the depot?Testing some artisan prize stuff and running into errors. All related to the TradeskillDepot.FindItemCount. Adding an "or 0" to them has hardended them against crashing.
File Lines Fixed cruncher.lua 45, 1005 m_cruncher.lua 59 tcn_feeder.lua 2457, 2514, 5284, 5719, 5776 tcn_library.lua 758 init.lua 2211, 3186, 3399, 4796
Same problem here.I'm still having the lua crash, but only when a recipe calls for something i need that's in my bank, if i take everything i need for the recipe out of the bank and put it on my person, it will run fine. i do have auto-depot turned off.
I am putting out a release that should alleviate a lot of the pain points, it won't fix the depot cause I don't have that kinda magic in my bag currently, but minimizing crashing and crafting on should be a thing that works.Same problem here.
1/27/2026
4.1991b - ChangeLog
Modified: Depot count methods to return 0 if we are not getting joy from the TLO.
Click on the "Craft" Tab, then the "Global Craft Settings" Tab, then Unselect the "Auto-Deposit" option.I keep all my TS tools in a large bag in my inventory. Its annoying that your tool puts them all in my bank. How do I turn this off?
Just in case the ID does not get sent to the devs can you provide the CrashID in text, or reproduce it for the text?Failed again
View attachment 74661
Hey JB -- I'm trying to make anything (blacksmithing) in SoR and when I press Execute it opens bank (as I'm standing next to banker), opens the find window, exits TCN.Just in case the ID does not get sent to the devs can you provide the CrashID in text, or reproduce it for the text?
Is there any text in the MQ window at all? specifically "red" text? still thinking it is depot related as I am on a F2P and it is going to the bank and getting items and buying things from vendors and crafting.Hey JB -- I'm trying to make anything (blacksmithing) in SoR and when I press Execute it opens bank (as I'm standing next to banker), opens the find window, exits TCN.
Running lua script 'tcn' with PID 16
[TCSNeXt] Starting Tradeskill Construction Set NeXt
[TCSNeXt] [Bouncing: MQ2DanNet plugin]
[TCSNeXt] [MQ2DanNet is now loaded]
[TCSNeXt] Removing Levitation
[TCSNeXt] Removing Visible Familiar
[TCSNeXt] Initializing Quest Log
[TCSNeXt] Initializing Trophy Tribute Benefits
[TCSNeXt] Activating Trophy Tribute Benefits
[TCSNeXt] Recipe (Riven Arcana Powder) Processed In: (0) Seconds
Ending lua script 'tcn' with PID 16 and status -1
I've updated scripts and database today.
There isn't. I shared what was visible.Is there any text in the MQ window at all? specifically "red" text? still thinking it is depot related as I am on a F2P and it is going to the bank and getting items and buying things from vendors and crafting.
There isn't. I shared what was visible.
If you'd like to send me a debug version I've got time to work through this.Is there any text in the MQ window at all? specifically "red" text? still thinking it is depot related as I am on a F2P and it is going to the bank and getting items and buying things from vendors and crafting.
For my issue, I am using:Just for my understanding everyone here has updated to the latest MQ live, correct? View attachment 74666 and TCN 4.1991b

yea that one is old.. not sure about the mechanics of redfetch and what it looks for, but that version is not what we are looking for.For my issue, I am using:
View attachment 74667
I just updated again to confirm:
View attachment 74668
