Plugin - MQ2Shaman 3.1.52471.11

[519helvis]

cwtn shm plugin is constantly pausing if i click in the settings box it also seems to be pausing after each mob kill .. ive tried diff class modes and still same scenario ... am most likely missing something obvious but its only this plugin and im running monk shd plugins just fine any thoughts?

 

[Sic]

cwtn shm plugin is constantly pausing if i click in the settings box it also seems to be pausing after each mob kill .. ive tried diff class modes and still same scenario ... am most likely missing something obvious but its only this plugin and im running monk shd plugins just fine any thoughts?

if you click the CWTN logo it pauses


iof you click the giant "Paused" it unpauses



all of the plugins work like this it is actually the same window, mq2shaman doesn't have its own window

We also 100% do not have anything that automatically pauses, so if you are pausing after each kill, that means YOU have something pausing it.

I would make sure you don't have a macro running.

 

[519helvis]

ok thanks i am on PeQ atm i was thinking it might be something in there ... only thing im running is cwtn plugins and rgmercs for my bard

i noticed it gets buggy at times so i just camped out and am gonna reboot etc

 

[Sic]

ok thanks i am on PeQ atm i was thinking it might be something in there ... only thing im running is cwtn plugins and rgmercs for my bard

i noticed it gets buggy at times so i just camped out and am gonna reboot etc

ok, that might be an emu thing - i've heard other's mention sometimes clicking anywhere can do that - it is *very* important to mention you're on emu since unfortunately cwtn nor i are mind readers :p

going to either need to use the slash commands or just handle clicking is pausing you

 

[519helvis]

camping and rebooting the RG mq seemed to help .. im starting to wonder if its an issue that happens when running through older OOW era zones that have since been revamped

maybe making meshes for those old style zones will help

 

[Sic]

camping and rebooting the RG mq seemed to help .. im starting to wonder if its an issue that happens when running through older OOW era zones that have since been revamped

maybe making meshes for those old style zones will help

there should be infinity X 0 reason that your mesh has anything to do with the UI window.

but it is emu and emu does weird shit.

hopefully when MQ is ported to EMU some of those things can be adressed

 

[Medicman]

If I use BYOS say on my Shaman so that I can have a cure in the 13th GEM Slot, will MQ2Class work the same as he/she always does using MQ2Class plugins. Guess simply with BYOS checked and a cure loaded in slot 13, will the class still do it's job with MQ2Class plugins with the exception of the last GEM SLOT?? I am trying to figure out how to beat Shei Vinitras and I continuously getting my ass kicked and I assume it is the "Death Touch" that is causing this issue. Thanks for any input you may have to help me win this event. Group make up is 120 Shaman, SK, Enchanter, Mage, with 118 Bard and 119 Beastlord. I get the boss down below 10% then wipe every time. I am also wondering if using MQ2React would help as well. Thanks again for indulging this old man.

 

[Sic]

If I use BYOS say on my Shaman so that I can have a cure in the 13th GEM Slot, will MQ2Class work the same as he/she always does using MQ2Class plugins. Guess simply with BYOS checked and a cure loaded in slot 13, will the class still do it's job with MQ2Class plugins with the exception of the last GEM SLOT?? I am trying to figure out how to beat Shei Vinitras and I continuously getting my ass kicked and I assume it is the "Death Touch" that is causing this issue. Thanks for any input you may have to help me win this event. Group make up is 120 Shaman, SK, Enchanter, Mage, with 118 Bard and 119 Beastlord. I get the boss down below 10% then wipe every time. I am also wondering if using MQ2React would help as well. Thanks again for indulging this old man.

Or you can just use "mem cure all" and it will do it.

I do Shei all the time shaman solo healer. 0 react, 0 byos

 

[Raging66]

Hello I want to run my Shaman Outside of group using CWTN however i cant seem to get the UseXTargetHealing And XTargetBuffing to work, can someone kindly help with commands etc or how i target my tank or someone outside of group please using CWTN Shaman.

 

[Oldman66]

Check the box for Xtar healing and buffing if you want. Right click one or more of the extended targets on your UI and assign that to your targeted player(s)

 

[Sic]

Hello I want to run my Shaman Outside of group using CWTN however i cant seem to get the UseXTargetHealing And XTargetBuffing to work, can someone kindly help with commands etc or how i target my tank or someone outside of group please using CWTN Shaman.

Please make sure you post in the correct location.

1. Turn on usetargethealing, 3. add player to your Xtarget window.

From the FAQ:
Q. Do I need to assign what Xtargets to watch for XTargetHealing?
A. Nope - Just toggle on UseXTargetHealing and it will check all your Extended Targets to see if they are PCs and then heal them at the NotMA # you have


Please make sure to post in the correct place

 

[Raging66]

omg after 19 years of playing eq i didnt even know you could do that and right click on extended and set targets like that, ive never raid either, Thank you , Does this work with dps outside for group set target of target and then assist?

 

[Sic]

omg after 19 years of playing eq i didnt even know you could do that and right click on extended and set targets like that, ive never raid either, Thank you , Does this work with dps outside for group set target of target and then assist?

no, if you want to out of group assist - there is raidmode with raid assisting.

however, with xtarget healing turned on - you will get aggro on a mob from healing, so if you were in a tanking mode, the shaman would then attack it (turn on usemelee etc, mob would need to bein your camp).

but no, no out-of-group assisting built in

 

[Raging66]

so its best to use kissassist with assist outside of group in this case and set to assist on target player at 99%?

 

[Sic]

so its best to use kissassist with assist outside of group in this case and set to assist on target player at 99%?

i 100% would tell you no, to not try and mix multiple automations at the same time - especially an entire macro like kissassist, but it can work yes.

>>> here is a thead <<<

 

[Raging66]

what i meant is not using the CWTN and just using kissassist outside of group. Problem is if i set up a raid for all 8 of my toons the exp i going to be meh

 

[Many_Whelps]

what i meant is not using the CWTN and just using kissassist outside of group. Problem is if i set up a raid for all 8 of my toons the exp i going to be meh

yeah, that's getting way outside the scope of what CWTN plugins are designed for. If you need 8 characters to tackle the content you're going after, you're kinda reaching a bit. Maybe it'd be better to take on easier content with just 6 characters and use the plugins as intended.

 

[Raging66]

yeah, that's getting way outside the scope of what CWTN plugins are designed for. If you need 8 characters to tackle the content you're going after, you're kinda reaching a bit. Maybe it'd be better to take on easier content with just 6 characters and use the plugins as intended.

oh i can already handle the content but i want to clear things more at speed by having a main tank DPS DPS and then 3 lower levels in group with the rest dpsing outside of group to speed things up. I help alot of lower levels and guildys in game so its nice to be able to help more and quicker. Thanks for the answers though

 

[Sic]

oh i can already handle the content but i want to clear things more at speed by having a main tank DPS DPS and then 3 lower levels in group with the rest dpsing outside of group to speed things up. I help alot of lower levels and guildys in game so its nice to be able to help more and quicker. Thanks for the answers though

well if you clicked the link i shared with you it goes over some ways to do that just with the setup you mention. specifically > this post in the thread i shared <

 

[Sic]

My heroic shaman keeps auto casting "Unity of the Souls Rk. II" on his own pet until mana is exhausted. I tried going into his own character and blocking the spell for his pet, but that doesn't seem to be working. I also tried blocking all of the cleric buffs ... ALL, just to see if it was a dueling buffer issue. That didn't work either.

Any suggestions?

it looks like you deleted your question but - you likely need to update your ui > here <

 

[darkfurlord]

had same issue, loaded default ui it stopped then reload the ui i have that only uses old buff icons. works fine now on all pet classes.

 

[Sic]

had same issue, loaded default ui it stopped then reload the ui i have that only uses old buff icons. works fine now on all pet classes.

yep, an out of date ui would do that, that's why i posted the thread before the patch that folks need to update their ui so it isn't out of date. we don't actually look at the ui itself, but it is feeding data back and if that data is no good then bleh

 

[aleck02]

Is there a way to save the settings i made instead of redoing them every time i load

 

[MrPatate]

Using the interface to change a setting will not save it.
Using the / command to change it will save it to the ini.

Additional infos in the F.A Q

 

[Sic]

Is there a way to save the settings i made instead of redoing them every time i load

Howdy aleck,

you can save settings by using the relative slash command > MQ2Shaman Commands <

EQ is a complicated game and MQ adds an additional layer on that, so definitely take a little bit to check out the FAQs and such, as not only do they offer some important for the plugins, but also for the game itself

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

> MQ2Shaman FAQ <

Q. The UI Window Doesn't save my settings?
A. This is intentional. The UI acts as a "hot swap" allowing you to adjust on the fly. If you want to "save" your settings, adjust it with the slash command.
Explained here > UI Video @ 9:10 <

 

[aleck02]

thank you Sic

 

[barry13]

Hi, can i confirm there's no plans to allow MQ2Shaman to use GHBuffBot outside of Guild Hall type zones? The reason i ask is i want the ability to auto-buff people on raids by them sending tells and i was going to write something myself; which will be worse than the MQ2Shaman functionality but with the zone restriction removed. Hope that makes sense!

i do think i understand why this is restricted to certain zones, this is on rizlona.

 

[Sic]

Hi, can i confirm there's no plans to allow MQ2Shaman to use GHBuffBot outside of Guild Hall type zones? The reason i ask is i want the ability to auto-buff people on raids by them sending tells and i was going to write something myself; which will be worse than the MQ2Shaman functionality but with the zone restriction removed. Hope that makes sense!

i do think i understand why this is restricted to certain zones, this is on rizlona.

No, the gh buff it functionally will only be for guild hall - however - I have a mostly working plugin that will allow this functionality (it will be a free plugin) and it will smartly handle pausing macros and even cwtn plugins to do the buffing. It got delayed with mq and then 64 bit and then suspensions but I'll be finishing it up for release very soon

 

[DeltaFarce89]

I may not have searched deep enough, but is there a way to set a CanniMinHp threshold for when usecanni is toggled?? I've caught myself a couple of times during the rezzing process of getting gear looted on other windows, that my shammy will canni suicide, and didn't see any commands to set a threshold within the ini or with a / command for when NOT to use canni....Or do I just need to stop being lazy and click it off during my rez process? Easy to do, I'm just forgetful, which is why I ask. :-)

 

[ChatWithThisName]

I may not have searched deep enough, but is there a way to set a CanniMinHp threshold for when usecanni is toggled?? I've caught myself a couple of times during the rezzing process of getting gear looted on other windows, that my shammy will canni suicide, and didn't see any commands to set a threshold within the ini or with a / command for when NOT to use canni....Or do I just need to stop being lazy and click it off during my rez process? Easy to do, I'm just forgetful, which is why I ask. :-)

MQ2Shaman should not be capable of killing you with Canni. We calculate the current health available and the amount of health that canni will take and verify that you have that and another 20% of your max health to avoid that exact situation.

Please verify you're not running a Lua, Macro, React, or other such mechanism that would cause that result. I can look and ensure the canni is being run through the formula but I suspect if it wasn't there'd be a lot more complaints about this issue.

 

[Sic]

I may not have searched deep enough, but is there a way to set a CanniMinHp threshold for when usecanni is toggled?? I've caught myself a couple of times during the rezzing process of getting gear looted on other windows, that my shammy will canni suicide, and didn't see any commands to set a threshold within the ini or with a / command for when NOT to use canni....Or do I just need to stop being lazy and click it off during my rez process? Easy to do, I'm just forgetful, which is why I ask. :-)

mq2shaman can't kill you with canni as chat mentioned - and it is even varies under certain circumstances to not be just the flat 20% (but not lower)

if you are on test server atm, the actual eq build has an issue with a few classes (like shaman) and zoning and hps

 

[Wunderr]

mq2shaman can't kill you with canni as chat mentioned - and it is even varies under certain circumstances to not be just the flat 20% (but not lower)

if you are on test server atm, the actual eq build has an issue with a few classes (like shaman) and zoning and hps

Can confirm. 10-15% hitpoint hit when zoning.

 

[Blas]

So, i play on emu with progression. Befor i have to try byos, is there a way that the shamy can cast AoE slow Tigir's Insects? I need a disease based slow. And if i got it right, going byos means that he wont buff automatically anymore.

Edit: byos cant use Tigir's Insects and if i have buffs mem'd in the spellslots, they wont be cast either.
Maybe the very vanilla build is too old? Do i have to update somewhere?

2nd Edit: At Level 60 he is only using single cast haste: Celerity instead of group: Talisman of Alacrity

 

[Blas]

Lets say i wanted to cast Tigir's Insects throu my Main Tank over BC. Because ive seen, that spell gem 8 isent used at level 60 on my shaman.
I whould like him to cast the AE slow on my target but it has to be queue'd in case he is already casting something. Is that possible?

example (wich isen't right i know and not queue'd as far as i know): /bc shamy //multiline ; /target id ${Target.ID}; /casting gem8

 

[Sic]

So, i play on emu with progression. Befor i have to try byos, is there a way that the shamy can cast AoE slow Tigir's Insects? I need a disease based slow. And if i got it right, going byos means that he wont buff automatically anymore.

Edit: byos cant use Tigir's Insects and if i have buffs mem'd in the spellslots, they wont be cast either.
Maybe the very vanilla build is too old? Do i have to update somewhere?

2nd Edit: At Level 60 he is only using single cast haste: Celerity instead of group: Talisman of Alacrity

The emu builds are mostly as-is - especially because emus can differ so greatly. They are still the old mq2 code. They will be updated current mq level when mq is on emu.

 

[Sic]

Byos custom is not in the EMU version at this time.

 

[NuclearShowers]

Does anyone know how to make the MQ2Shaman plugin keep the Recourse buff up? I use it with HoT and I have to manually tab over and click it to keep it up.

Thanks

 

[durango773]

Should be in the MQ2shaman thread, for focused help Sir/Ma'am.

 

[Sic]

Does anyone know how to make the MQ2Shaman plugin keep the Recourse buff up? I use it with HoT and I have to manually tab over and click it to keep it up.

Thanks

howdy nuclear showers, please make sure to post in the correct location. the cwtn plugin has its own section, and each plugin has a discussution thread.

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<

yes we use it, as a group heal, and we check for all the sub-portions of the spell before reapplying - we don't keep it up 24/7

 

[biggb]

I run a three box with three mercs, is there is way to have the shm/enc eq2 buff mercs of the group seems like you have to manually do your mercs. New user dont know the whole program yet. All three characters get buffs that are in group, but when i pop the mercs, nothing happens. Thanks.