Plugin - MQ2Shaman (2 Viewers) 3.1.52471.11

[Sic]

is this one easy to get? or just get 63 speyial brew? sorry my questions but i never did any of this Quests.

overseer helps to get brews - but you still have to get access to be able to purchase the item - you need to do both naggy and vox raid in the Old Man McKenzie missions

 

[victoriansense]

overseer helps to get brews - but you still have to get access to be able to purchase the item - you need to do both naggy and vox raid in the Old Man McKenzie missions

Awesome video! I giggled and giggled the whole time.

 

[Draknocht]

is the /shm missing supposed to list all spells missing even if can not use them due to being on TLP server that hasn't reach that expansion yet?

 

[Sic]

is the /shm missing supposed to list all spells missing even if can not use them due to being on TLP server that hasn't reach that expansion yet?

yes, anything that everquest says is in the available spell list for your level - tlp or otherwise - it is going to list. Everquest doesn't "lock" spell information behind expansions.

you should work harder and become a big stronk shaman and defeat the enemies and find new lands, and maybe you too can find the super sweet spells that are only spoken of in whispers and shadows!

 

[Draknocht]

yes, anything that everquest says is in the available spell list for your level - tlp or otherwise - it is going to list. Everquest doesn't "lock" spell information behind expansions

Thanks

 

[FadedFour20]

I love the epic tab but have a suggestion on adding it to go off when bard epic is clicked. When my bard pulls a mob the shaman insta clicks and my bard doesn't get the buffs and hurts my groups DPS.

 

[WindowUnit]

I noticed this on the April Fools teaser.

 

[burdsjm]

I love the epic tab but have a suggestion on adding it to go off when bard epic is clicked. When my bard pulls a mob the shaman insta clicks and my bard doesn't get the buffs and hurts my groups DPS.

Doesn’t it wait for the mob %? I’ll haven’t noticed. I normally run in chase and hunter modes for events.

 

[ChatWithThisName]

I noticed this on the April Fools teaser.

This is the shaman thread, do you haz question about shaman?
There is no bard, only april fools.

 

[SomeTester]

This is the shaman thread, do you haz question about shaman?
There is no bard, only april fools.

I’m a bard!

 

[WindowUnit]

This is the shaman thread, do you haz question about shaman?
There is no bard, only april fools.

No questions regarding MQ2SHM at the moment. It's truly been the cat's pajamas.

It was the first CWTN plugin I used, and now having WAR/SHM both on yer plugins is an absolute rock solid foundation to my crew.

.. but since YOU chose to bring up a theoretical MQ2Bard..

would WaitForBardEpic be something added to SHM before there was a MQ2Bard? Not sure how those things work.

 

[WindowUnit]

Or maybe this would be an opportunity to ask, am I properly using both my Bard and Shaman 2.0s in conjunction with my present set up?

I keep Ruchu on Burn conditions for my Shaman, and then I have a hotkey I press to activate the SHM epic when driving with the Warrior if we aren't encountering any named or other burn conditions. I generally click activate more than having it auto activate. When I started out I had it as an Offensive clicky because I was generally grinding, and just wanted it up as much as possible. The Bard is on KA that I believe I just pieced together, but most clicky conditions came from Sic's KA INI.

 

[Sic]

I love the epic tab but have a suggestion on adding it to go off when bard epic is clicked. When my bard pulls a mob the shaman insta clicks and my bard doesn't get the buffs and hurts my groups DPS.

no.

we will be making that possible for bard when bard becomes a thing, but we will not be holding for shaman.

you have the options available for shaman usage. they have too many things to press to wait

 

[Sic]

No questions regarding MQ2SHM at the moment. It's truly been the cat's pajamas.

It was the first CWTN plugin I used, and now having WAR/SHM both on yer plugins is an absolute rock solid foundation to my crew.

.. but since YOU chose to bring up a theoretical MQ2Bard..

would WaitForBardEpic be something added to SHM before there was a MQ2Bard? Not sure how those things work.

no

 

[Sic]

Or maybe this would be an opportunity to ask, am I properly using both my Bard and Shaman 2.0s in conjunction with my present set up?

I keep Ruchu on Burn conditions for my Shaman, and then I have a hotkey I press to activate the SHM epic when driving with the Warrior if we aren't encountering any named or other burn conditions. I generally click activate more than having it auto activate. When I started out I had it as an Offensive clicky because I was generally grinding, and just wanted it up as much as possible. The Bard is on KA that I believe I just pieced together, but most clicky conditions came from Sic's KA INI.

you have the 3 options available for shaman epic usage.

burn
always
never

if you want to manually throw it, use never, and then you can manually throw it / react it that is why it is there. mq2shaman will not be delaying its usage outside of those options.

i advise against this, but this is why the "never" option is available.

 

[WindowUnit]

you have the 3 options available for shaman epic usage.

burn
always
never

if you want to manually throw it, use never, and then you can manually throw it / react it that is why it is there. mq2shaman will not be delaying its usage outside of those options.

i advise against this, but this is why the "never" option is available.

Nah, never had any issues with it really. I believe I read that more options were recently added, but outside of moving mine from Offensive to Burn I haven't had any issues. Basically, if I see its not up and is usable and I don't expect a named or big pull soon, I smash that button.

Is this a similar approach to what others use? I might be going about things in a crude manner, but haven't really run into anything yet that I couldn't blunder my way through. I could put it back in Offensive and have a higher uptime, but I just felt like some of it got wasted if I was being lazy.

 

[Sic]

Nah, never had any issues with it really. I believe I read that more options were recently added, but outside of moving mine from Offensive to Burn I haven't had any issues. Basically, if I see its not up and is usable and I don't expect a named or big pull soon, I smash that button.

Is this a similar approach to what others use? I might be going about things in a crude manner, but haven't really run into anything yet that I couldn't blunder my way through. I could put it back in Offensive and have a higher uptime, but I just felt like some of it got wasted if I was being lazy.

well the epic usage is built-in with the epic usage options.

so yeah if you're adding it to add clicky then you're in wild west territory - you could have it on offensive addclicky, and turn epic usage to never, and keep usemelee on so you're meleeing (for offensive to fire). but again, that is wild west territory and you're on your own, however, that does sound like it will accomplish what you're trying to accomplish

/shm ShmEpic - 0/1/2 - When to use epic - 0, 1, 2 for never, burn only, combat.

 

[WindowUnit]

well the epic usage is built-in with the epic usage options.

so yeah if you're adding it to add clicky then you're in wild west territory - you could have it on offensive addclicky, and turn epic usage to never, and keep usemelee on so you're meleeing (for offensive to fire). but again, that is wild west territory and you're on your own, however, that does sound like it will accomplish what you're trying to accomplish

/shm ShmEpic - 0/1/2 - When to use epic - 0, 1, 2 for never, burn only, combat.

Hmm, I'm not playing this evening, but I will check on that. ShmEpic 2 sounds like what I was going for, but I wasn't aware of that option when I started.

I just thought I had to choose Offensive, Burn, or manual click. I went from Offensive to Burn with option of manual click.

So if I set ShmEpic 0/1/2 - I remove the epic from my Burn click list? Redundant to leave it there if its firing on any combat? Will check it out and see if it better suits, but what I had been doing seemed to work and allow the level of control I sought.

Thank ya, Sic.

 

[Sic]

Hmm, I'm not playing this evening, but I will check on that. ShmEpic 2 sounds like what I was going for, but I wasn't aware of that option when I started.

I just thought I had to choose Offensive, Burn, or manual click. I went from Offensive to Burn with option of manual click.

So if I set ShmEpic 0/1/2 - I remove the epic from my Burn click list? Redundant to leave it there if its firing on any combat? Will check it out and see if it better suits, but what I had been doing seemed to work and allow the level of control I sought.

Thank ya, Sic.

Q. Epic 1.5/2.0?
A. We automatically use your 1.5/2.0 - for MQ2Shaman it has the option of /shm shmepic 0, 1, 2 for never, burn only, combat.

never - never uses it (so you can manually fire/hold it)
burn only - only when your burn conditions are met
combat - when you have mobs on xtarget (like i mentioned before we don't wait, you have mobs on xtarget, we start doing stuff, one of the things we start doing is fire epic.)

if you're having issues with people being out of range, you should consider having your group chasing your tank, instead of wasting time pulling back to a camp

 

[Krispy]

I love this! I am relatively new to MQ2 and was fiddling with my shm way too much before. I am an avid TLP player. I have two questions:

1) Should I unload kissassist? This seems to be working with kissassist.
2) Scenario: on Rizlona TLP, I have a 60 shm with some group buffs in the line up. Specifically Khura's Focus. I threw a 41 mage into group to try and level him up. SHM kept sticking on him because Khura's is too high level. Is there a way to prevent this?

I did mention I was new? lol I am sure it is an easy fix for some of you.

 

[Sic]

I love this! I am relatively new to MQ2 and was fiddling with my shm way too much before. I am an avid TLP player. I have two questions:

1) Should I unload kissassist? This seems to be working with kissassist.
2) Scenario: on Rizlona TLP, I have a 60 shm with some group buffs in the line up. Specifically Khura's Focus. I threw a 41 mage into group to try and level him up. SHM kept sticking on him because Khura's is too high level. Is there a way to prevent this?

I did mention I was new? lol I am sure it is an easy fix for some of you.

1. you should *NOT* use another form of automation on top of it. you will 100% have conflicting behavior.
2. you can either go byos and handle your own gems/buff, you can unload mq2cwtnbuffs on the mage /plugin mq2cwtnbuffs unload, or you can block the spells that khura's casts on the mages blocked buffs.

 

[Kakgumu]

I have 9 accounts and have purchased each of the CWTN class plugins. FANTASTIC work btw! I've recently run into a situation where I'd very much like to run 3 separate groups in different zones...at the same time. The 3rd group does NOT have aa dedicated puller class, so my Shaman is pulling. In an idea world I'd have her pull with the highest rank of Malo. Is there a way I can specify that in the plugin?

Thanks again for all you guys do!
Kak

 

[Medicman]

I have 9 accounts and have purchased each of the CWTN class plugins. FANTASTIC work btw! I've recently run into a situation where I'd very much like to run 3 separate groups in different zones...at the same time. The 3rd group does NOT have aa dedicated puller class, so my Shaman is pulling. In an idea world I'd have her pull with the highest rank of Malo. Is there a way I can specify that in the plugin?

Thanks again for all you guys do!
Kak

Either send a note to Sic or wait and I am sure he will respawn

 

[Saffron]

SIC spawns? What is the respawn time?

 

[Sic]

I have 9 accounts and have purchased each of the CWTN class plugins. FANTASTIC work btw! I've recently run into a situation where I'd very much like to run 3 separate groups in different zones...at the same time. The 3rd group does NOT have aa dedicated puller class, so my Shaman is pulling. In an idea world I'd have her pull with the highest rank of Malo. Is there a way I can specify that in the plugin?

Thanks again for all you guys do!
Kak

no there isn't

 

[Sic]

Next update it will default to use Turgur's Swarm as pull AA, if you don't have Turgur's Swarm AA, you will use your malo spell (if memorized).

if you don't want to use these you can DisablePullAbility and it will pull with melee

 

[burdsjm]

Highly recommend spending the time to get the Tower of Rot clickie to pull.

 

[Ravyns]

I just bought this plugin, and as I was enabling it and getting things going I noticed a named and decided to engage it. Everything is going fine, expect that it beeps every time my shaman targets his pet to heal it, then re-targets the named. Is there a setting to stop this? It's rather annoying.

 

[Sic]

I just bought this plugin, and as I was enabling it and getting things going I noticed a named and decided to engage it. Everything is going fine, expect that it beeps every time my shaman targets his pet to heal it, then re-targets the named. Is there a setting to stop this? It's rather annoying.

MQ2Shaman Commands
(I turn off beep on named as well - it is basically a minor explosion every time it pops off, and gives a slight fight)
/shm BeepOnNamed true/false/on/off/0/1 - Beeps on named (when in a tank mode)

Howdy Ravyns, Thanks for checking out MQ2Shaman

Since you didn't know where to find the answer to that question, definitely make sure you check out

>>> Getting Started with CWTN Plugins <<<

Happy hunting

 

[Ravyns]

MQ2Shaman Commands
(I turn off beep on named as well - it is basically a minor explosion every time it pops off, and gives a slight fight)
/shm BeepOnNamed true/false/on/off/0/1 - Beeps on named (when in a tank mode)

Howdy Ravyns, Thanks for checking out MQ2Shaman

Since you didn't know where to find the answer to that question, definitely make sure you check out

>>> Getting Started with CWTN Plugins <<<

Happy hunting

Many thanks for the command and the guide link.

 

[Krispy]

1. you should *NOT* use another form of automation on top of it. you will 100% have conflicting behavior.
2. you can either go byos and handle your own gems/buff, you can unload mq2cwtnbuffs on the mage /plugin mq2cwtnbuffs unload, or you can block the spells that khura's casts on the mages blocked buffs.

Sic, thanks man. I just tweaked my shm KA to where I wanted but was least comfortable with his reaction time. That is why I got MQ2shaman. It was hard to let go of the KA but as soon as I did, I didn't regret it. The buff issue is mute as I just PLed through the issue. Much, much appreciat3ed

 

[Redbot]

Redbot updated MQ2Shaman with a new update entry:

04/13/2021

- Updated our SoW/Lupine Spirit check for circumstances where the movement speed you get from your SoW and your Lupine Spirit are the same
-- despite casting different spells. Thanks Mortanio.
- Added Turgur's Swarm as PullAA.
-- If you don't have Turgur's Swarm, it will use your Malo spell as PullAbility (has to be memorized in your loadout to use it to pull).
- If you have disablepullability, then you pull with melee as usual.

Read the rest of this update entry...

 

[Rock]

2 quick questions, I apologize if these have already been covered.

1. Synergy with Enchanter (cwtn) - do I need to be toggling the use haste / use slow / use aoeslow to save them any casts (turn haste on for one plugin and turn slow on for the other) or do the plugins talk to each other though CWTNCommons and CWTNBuffs and apply only the greater of each. I wouldn't normally run these 2 together, but when I do what's the most efficient way for me to set them up.

2. When I first got the Shm epic the plugin was using it on cd, I haven't changed any settings regarding this but lately it's not firing off anymore.

 

[Sic]

2 quick questions, I apologize if these have already been covered.

1. Synergy with Enchanter (cwtn) - do I need to be toggling the use haste / use slow / use aoeslow to save them any casts (turn haste on for one plugin and turn slow on for the other) or do the plugins talk to each other though CWTNCommons and CWTNBuffs and apply only the greater of each. I wouldn't normally run these 2 together, but when I do what's the most efficient way for me to set them up.

2. When I first got the Shm epic the plugin was using it on cd, I haven't changed any settings regarding this but lately it's not firing off anymore.

View attachment 29560

1. None of our plugins talk to anything else.
There's no magic way we would know that you wanted your chanter to do x instead of shaman or shaman instead etc.

They just do their job. I would turn anything off for characters that you don't want doing stuff

2. Always means when you have mobs on xtarget. You have always, burn, never.

Q. Epic 1.5/2.0?
A. We automatically use your 1.5/2.0 - for MQ2Shaman it has the option of /shm shmepic 0, 1, 2 for never, burn only, combat.

 

[Rock]

2. Always means when you have mobs on xtarget. You have always, burn, never.

Q. Epic 1.5/2.0?
A. We automatically use your 1.5/2.0 - for MQ2Shaman it has the option of /shm shmepic 0, 1, 2 for never, burn only, combat.

ok, so I have always on, and it's not using the epic anymore, it did last week.

 

[Rock]

Actually, that is the problem, I see what I need to solve. For some reason, my shm is the only member of my group without any targets on XTarget (accept the pc target I assigned on the last slot)

 

[Sic]

Actually, that is the problem, I see what I need to solve. For some reason, my shm is the only member of my group without any targets on XTarget (accept the pc target I assigned on the last slot)

ok, so I have always on, and it's not using the epic anymore, it did last week.

Well, nothing has changed as far as how we handle epic.

if you are not seeing mobs on your xtarget window - sounds like you have an issue that is unrelated to mq2shaman that needs to be fixed

here is it casting it with current mq2shaman build

 

[Rock]

yes I found it, thank you, by knowing how the logic the works it led me what the actual problem was. I don't spent much if any watching the shm so I didn't notice the list wasn't populating. Although each slot was set to Auto there's an over all toggle lower on the list, Auto Add Hater Targets that was turned off. Toggled that on and it all works again.

 

[TeRRor]

Hey guys im having a problem with my shaman not breaking invis to engage when i attack a mob. Any ideas? My tank is set to MA, ive tried heal mode hybrid and dps mode, auto assist is at 99. Nothing... i have to manually /makemevisible to get him to drop invis and engage. I dont have to do this with any of my other CTWN toons

 

[Sic]

Hey guys im having a problem with my shaman not breaking invis to engage when i attack a mob. Any ideas? My tank is set to MA, ive tried heal mode hybrid and dps mode, auto assist is at 99. Nothing... i have to manually /makemevisible to get him to drop invis and engage. I dont have to do this with any of my other CTWN toons

Q. How can i get it to break invis to heal?
A. MQ2Shaman will break invis to heal if a camp is set - so mode 1 would break invis to heal, where mode 0 would not.

and/or you can turn on usemelee