• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Shaman

Plugin - MQ2Shaman 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (114) Reviews (65) History Discussion Terms and conditions
Works great that I can see healer part does.. dps not sure think fights dont last long enough ?
 
Yes works great, Just dont use DPS mode and pull a train like I did....but I was testing it, got a few down, all slowed...but that me testing it..
 
So happy to be running with this, thanks CWTN and Sic!

Only niggle I can see is buffing Talisman of the Enduring (regen) - it doesn't stack with Dissident Roar, so it gets overwritten every minute, then sham re-mems regen and rebuffs between every fight.

Can't see a setting for it anywhere? so running BYOS for now to avoid it for now
 
Love it, i noticed no hotkey for use melee, but /shm usemelee 0 worked. I realize its very busy already but it would be more consistent with mq2cleric if there was melee toggle.
 
ABDon said:
So happy to be running with this, thanks CWTN and Sic!

Only niggle I can see is buffing Talisman of the Enduring (regen) - it doesn't stack with Dissident Roar, so it gets overwritten every minute, then sham re-mems regen and rebuffs between every fight.

Can't see a setting for it anywhere? so running BYOS for now to avoid it for now
Click to expand...
yup - its going to cast stuff that you can use when it can - if you don't want it to cast on you, block the talisman
 
My shaman is trying to chain cast "unity of the kromnif" on my monk's familiar and getting the "You cannot cast Unity of the Kromnif on Dude's familiar." Let me know what other information might help.

edit1: If it matters it is the Emperor Ganak familiar.

edit2: I dropped everyone's familiar and he is acting 'normal' again As soon as I pop a familiar, he returns to his attempt to cast thing on the familiar.
 
Last edited:
I mean, I play pally and would buy it. Be nice to round out the tanks. But that’s not this thread. Go shaman!
 
@Sic - does mq2shaman have a check to see what class is tanking? or if WG will stack with the MT's current buffs? I've noticed the shaman casting WG on an SK when it is blcoked by the SK's stance line. ...and Stance gives the SK more hp.
 
bziddy said:
My shaman is trying to chain cast "unity of the kromnif" on my monk's familiar and getting the "You cannot cast Unity of the Kromnif on Dude's familiar." Let me know what other information might help.

edit1: If it matters it is the Emperor Ganak familiar.

edit2: I dropped everyone's familiar and he is acting 'normal' again As soon as I pop a familiar, he returns to his attempt to cast thing on the familiar.
Click to expand...
if you have a familiar out eq treats it like a pet. you should click your auto leave on your familiar keyring tab
1603327173449.png
 
BeepBeepImAJeep said:
@Sic - does mq2shaman have a check to see what class is tanking? or if WG will stack with the MT's current buffs? I've noticed the shaman casting WG on an SK when it is blcoked by the SK's stance line. ...and Stance gives the SK more hp.
Click to expand...
yes, of course it checks who is tanking for tank buffs (with the cwtn we cast stuff on the MA for that purpose). if you're asking about the Growth line - we check stacking before we cast it - I'm assuming you're lower lvl since you called it WG - if mq2/eq is incorrectly reporting stacking you will need/want to block it., but we *do* already check for stacking with everything.
 
Sic said:
yes, of course it checks who is tanking for tank buffs (with the cwtn we cast stuff on the MA for that purpose). if you're asking about the Growth line - we check stacking before we cast it - I'm assuming you're lower lvl since you called it WG - if mq2/eq is incorrectly reporting stacking you will need/want to block it., but we *do* already check for stacking with everything.
Click to expand...

Force of habit to call it WG. I'm seeing a 115 SHM casting "Frenzied Growth Rk3" on a 115 SHD using "Stormwall Stance Rk2"

Is or rather will there be an option to turn off "Fleeting Fury"?
 
BeepBeepImAJeep said:
Force of habit to call it WG. I'm seeing a 115 SHM casting "Frenzied Growth Rk3" on a 115 SHD using "Stormwall Stance Rk2"

Is or rather will there be an option to turn off "Fleeting Fury"?
Click to expand...
if you check. it only casts Frenzied growth when it stacks (or is reporting as better by mq2) than stormwall.

you can byos if you don't like growth being memorized (for the time being, I can see how/where that is redundant for sk as your main tank)

dps stance also doesn't memorize growth for the short term

by fleeting fury are you talking about the low lvl STStr buff line that goes from strengthen to spirit of might? you're only going to cast those if you don't otherwise have better buffs (like how mammoth line gives us better stuff later on). the STStr line is also only checked on melee toons. Unless there is a good reason, No there won't be an option to turn it off - if you don't want the buff you can block it as said in previous responses.

if instead you mean fleeting spirit, the AA, it is tied to burn (no way to turn it off atm - unlikely it will be a toggle outside of burn toggles)
 
jonnygymnic said:
Love it, i noticed no hotkey for use melee, but /shm usemelee 0 worked. I realize its very busy already but it would be more consistent with mq2cleric if there was melee toggle.
Click to expand...
well. this is why it is pre-release.

thank you for your notice.
 
Sherwood said:
I would definitely love to try both of them.../cough /cough
Click to expand...
if you look at many of the replies in this thread from today, including 2 above you, you will see that both mq2enchanter and mq2shaman are in very vanilla as pre-release.

you litearlly need to just run your patcher, and then load them.
 
Sic said:
if you look at many of the replies in this thread from today, including 2 above you, you will see that both mq2enchanter and mq2shaman are in very vanilla as pre-release.

you literally need to just run your patcher and then load them.
Click to expand...
Yeah, I realized that after I posted...I generally do that, it's like it's in my DNA.
 
i just tryed mq2shaman and he spends 99% of the time buffing the tank im not running any macro's as i have did /end numerous times and it say "cannot end a macro when one isn't running, im not sure why it is doing this, i have tryed it on dps and on hybrid with the same effect. all i have turned off was autodismount and autostandonfeign
any suggestions
 
delon said:
i just tryed mq2shaman and he spends 99% of the time buffing the tank im not running any macro's as i have did /end numerous times and it say "cannot end a macro when one isn't running, im not sure why it is doing this, i have tryed it on dps and on hybrid with the same effect. all i have turned off was autodismount and autostandonfeign
any suggestions
Click to expand...
you send this exact thing to me in PM.

it only does combat buffing in combat - rest of the buffs don't happen during combat.

hyperbole doesn't help me help you. nor does pming me, then posting the exact thing here after i respond to you.

can you be more specific on what it is casting and what you expect it to cast
 
wintry grit, spiritual squall, ancient bargain, communication of the cheetah, tailisman of the unwavering, group shrink over and over no dot no nukes no slows doesnt send pet to attack. have tryed on manual, assist with a camp radius of 5 and he is right beside my cleric with the exact same camp radius and everything even when he melee's he only cast the same as noted here
 
Aside from the melee button, which has already been mentioned, everything worked great for me. Ran it in Hybrid and then put on DPS mode and left it there. Was perfect for what I do. Thank you CWTN and Sic! Well done as usual.
 
it is a awsome build and all the others are great as im running shd,zerker,rogue and cleric also just not getting why he only doing this ive watch sic's video over and over and cant figure out whats going on
 
delon said:
wintry grit, spiritual squall, ancient bargain, communication of the cheetah, tailisman of the unwavering, group shrink over and over no dot no nukes no slows doesnt send pet to attack. have tryed on manual, assist with a camp radius of 5 and he is right beside my cleric with the exact same camp radius and everything even when he melee's he only cast the same as noted here
Click to expand...
wintry is a nuke that gives us a twincast.
squall is our bread and butter heal
ancient bargain is your canni spell for mana
cheetah is during downtime
GRegen is during downtime


5 campradius is bad - that is not going to work for just about anything. you're not going to send in your dog, you're not going to nuke or do anything against the mob because its not in your camp radius.

I would double check you have your MA/MT assigned, and I would create a reasonable campradius like 30-60 so when the mob enters your camp radius, and is fighting your ma/mt, you will react accordingly.

since you mentioned both in combat and out of combat things, it sounds like its just a settings issue.

sounds like it is working properly, but you adjust some settings to things that aren't going to work.
 
i have changed to 60 on camp radius all he does is cast the same 6 things over and over my cleric is right beside my shaman with a camp radius of 5 on assist this way it keeps him from meleeing which is what i figured with my shaman also he would stand back and dot and nuke but he has not yet cast one dot or nuke i know it going to be some dumb a$$ thing im doing wrong but i dont understand it cause i did not change any settings except 2 things
 
delon said:
i have changed to 60 on camp radius all he does is cast the same 6 things over and over my cleric is right beside my shaman with a camp radius of 5 on assist this way it keeps him from meleeing which is what i figured with my shaman also he would stand back and dot and nuke but he has not yet cast one dot or nuke i know it going to be some dumb a$$ thing im doing wrong but i dont understand it cause i did not change any settings except 2 things
Click to expand...
if you dont want to melee /shm usemelee off and /clr usemelee off

again - did you set your mt/ma in your group window?
 
Have a question when i do a /shm show it says ZerkerWnd does not exist.

i have done a /plugin mq2shaman load

also using default UI

Thank you
Calvin
 
CGY34 said:
Have a question when i do a /shm show it says ZerkerWnd does not exist.

i have done a /plugin mq2shaman load

also using default UI

Thank you
Calvin
Click to expand...
if you have never used a cwtn plugin before - you will actually have to load another cwtn plugin until next build, for it to create the window (if another plugin loaded it it would be fine) --- our template turns out didn't have the create xml window stuff, and i never noticed)

if you HAVE used a cwtn plugin before then watch this vid

you need to do a /reloadui
 
has to be set for mq2 berserker rogue cleric, and for the ini i have on my bard shaman is in dps stance i have tryed hybrid also both in manuel and assist with no change like i said it may be a setting i have wrong i donot know

1603337266493.png

(mod edit: edited your picture since you had character information in it.)
 
Last edited by a moderator:
You must log in or register to reply here.
Plugin - MQ2Shaman
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -