• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Rogue

Plugin - MQ2Rogue 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (60) Reviews (29) History Discussion Terms and conditions
Ever since my rogue got to 125 and started using Shadowscale Leggings of the Perpetual Reverie, he will now summon poison in downtime. I've tried this for several weeks, updating VV and MQ2Rogue every time a new version is posted. The behavior remains the same. It worked fine with his 120 pants. I have them on the addclicky section.

1705427925060.png

Just like I did with the 120 pants. I can summon manually, and once summoned the poison is used by downtime clicky, I just can't summon them. Any idea?
 
OldGuard said:
Ever since my rogue got to 125 and started using Shadowscale Leggings of the Perpetual Reverie, he will now summon poison in downtime. I've tried this for several weeks, updating VV and MQ2Rogue every time a new version is posted. The behavior remains the same. It worked fine with his 120 pants. I have them on the addclicky section.

View attachment 56058

Just like I did with the 120 pants. I can summon manually, and once summoned the poison is used by downtime clicky, I just can't summon them. Any idea?
Click to expand...
your pants should be in the "summon" group, not downtime group.

Q. I didn't watch the mq2rogue video, none of the getting started information, and I don't know how to add poison to automatically be used?
A. I demonstrate this on the mq2rogue video at > THIS < mark. You add them as a downtime clicky.

Q. I still don't know where to add poison or pants for addclicky.
A. :
hold your poison, /rog addclicky downtime
then
hold your pants, /rog addclicky summon #, where # is how many you want to summon.
 
100%, this should not be in downtime section, because you're summoning items. The "Summon" clicky group has the routine for handling a specified number of items and will stop once the threshold is met.
 
I'm having some fun PL'ing a few new chars, using my 125 rogue on Puller Tank to pull some greens for the lvl 100's. It uses Throw Stone which is fine, but it tends to walk right up to the mob's face and throw it rather than keep some distance. I know rogues generally aren't pullers so it's probably not a priority, but is there a setting i could adjust to give her a little more room to run back to camp without getting smacked a few times?
 
Enormo said:
I'm having some fun PL'ing a few new chars, using my 125 rogue on Puller Tank to pull some greens for the lvl 100's. It uses Throw Stone which is fine, but it tends to walk right up to the mob's face and throw it rather than keep some distance. I know rogues generally aren't pullers so it's probably not a priority, but is there a setting i could adjust to give her a little more room to run back to camp without getting smacked a few times?
Click to expand...
we don't roam around looking for a spot, we nav to the mob and if we find something within usage range that we have los on, we'll hit it and unfortunately los eq/mq isn't always as you'd expect

would recommend getting a staff of viral flux or something that gives you more space for that to happen with
 
Enormo said:
I'm having some fun PL'ing a few new chars, using my 125 rogue on Puller Tank to pull some greens for the lvl 100's. It uses Throw Stone which is fine, but it tends to walk right up to the mob's face and throw it rather than keep some distance. I know rogues generally aren't pullers so it's probably not a priority, but is there a setting i could adjust to give her a little more room to run back to camp without getting smacked a few times?
Click to expand...
Last time I tried to use throw stone the range was abysmal. Try it manually. I doubt you'll have much better luck. If you want to use ranged, put a throwing weapon on in ranged and ammo slot and it'll hum those at the enemy.

Here's an easy item to grab. Infinity throwing things for pulling
everquest.allakhazam.com

The Guardian's Pouch

Everquest Item Information for The Guardian's Pouch
everquest.allakhazam.com everquest.allakhazam.com
 
The plugin is not assisting when I kill Mobs that do not appear on the extended target window (Archers in FF mission for example) is there a workaround or planned fix for this?
 
I do something similar for a raid environment where I might have toons out of group.

Code: 
/timer 30, /dgz /tar id ${Target.ID}
/noparse /dgz /if (${Select[${Me.Class.ShortName},ROG,BER,MNK,BRD]}) /nav target
/noparse /dgz /if (${Select[${Me.Class.ShortName},ROG,BER,MNK,BRD]}) /attack on
 
I get the whole manual assist thing, that's what I am doing now when I go for the plucked achievement, I was hoping for something that was automated...
 
Nuclearweapon said:
I get the whole manual assist thing, that's what I am doing now when I go for the plucked achievement, I was hoping for something that was automated...
Click to expand...
once mobs are aggro, it will assist you as you'd expect

but nah, it also helps prevent toons blowing their cooldowns and such on things they shouldn't.

since you're doing specific scripts automation style (and the game doesn't usually work like this) you'd want to incorporate that into your script
 
Im runnign 2 rogues atm, with alliance on the damage is insane even if u dont make it fulminate. the increased poison damage itself is huge.
 
Each resource on RG has an Overview / Discussion Thread and either a link to their wiki or tabs with FAQ, Commands, Etc.
Please make sure to post in the respective discussion thread, and check the FAQ/Commands/Wiki for information before posting.
 
vanemon said:
can you automate this with the rog-plugin or do you need to get poison-potions for those toons? thx
Click to expand...
mq2rogue can not click on another person's character to use poisons, no. they will want their automation to apply poison potions to themselves
 
Wrong forum
I was wondering if it would be possible to add my shadow scale rogue Leggings clicky poison to clickys? Like in offensive?
 
I like reading the FAQ.

Q. I still don't know where to add poison or pants for addclicky.
A. :
hold your poison, /rog addclicky downtime
then
hold your pants, /rog addclicky summon #, where # is how many you want to summon.

Q. I added my leggings to clicky using /rog addclicky summon #, but now I can't pick up my poison to add it to downtime using /rog addclicky downtime
A. Because the leggings are a summon the plugin will auto inventory the poison, so you want to add the poison first, then add the leggings. If you've already added the leggings, you can pause the plugin /rog pause on, then do the poison, and then unpause the plugin /rog pause off.
 
I was really reluctant to get this plugin in, before swapping to Plugin on this Rogue he was typically 1st in DPS most of the time which is good and steady for a toon you don't want to get smacked. Before swapping my Warrior to Plug in I would often out DPS all my other toons I was thinking well my KA must be pretty good if he is holding his own. Then I got it on my warrior and dropped to 2nd, then got it on my druid and dropped to 3rd. Then I went ahead and made the final purchase to finish out my group. Now when it comes to DPS my Warrior, Druid and rogue are all 3 fighting over that top DPS spot. It is never one over the other every time but Man its exciting to see the surges in DPS since I got these plugins. I will probable get more as I expand my army and now I feel like I can run an army of toons.
 
I am having a "lack of DPS" problem. My Rogue is level 64 and most of the time he doesn't even register on DPSADV window. In other words his name isn't even on there after a fight. My group consists of PAL, SHM, BRD, BST, ROG, WIZ. I go and watch him during combat and found that he was using HIDE and DISARM all the time, so I went into the settings and shut those off. He is still using them all the time no matter what I have them set to (on or off). I especially wanted the Hide feature off because he was so slow during movement and constantly "Hiding", and falling behind the rest of the group. I know I probably have something set up wrong, just can't figure it out. He goes around behind the mob and is armed with some fairly good daggers, and doesn't even register on the DPS meter.

Any help would certainly be appreciated.

Vrak
 
Vrakenor said:
I am having a "lack of DPS" problem. My Rogue is level 64 and most of the time he doesn't even register on DPSADV window. In other words his name isn't even on there after a fight. My group consists of PAL, SHM, BRD, BST, ROG, WIZ. I go and watch him during combat and found that he was using HIDE and DISARM all the time, so I went into the settings and shut those off. He is still using them all the time no matter what I have them set to (on or off). I especially wanted the Hide feature off because he was so slow during movement and constantly "Hiding", and falling behind the rest of the group. I know I probably have something set up wrong, just can't figure it out. He goes around behind the mob and is armed with some fairly good daggers, and doesn't even register on the DPS meter.

Any help would certainly be appreciated.

Vrak
Click to expand...
this sounds like a dpsadv configuration / eq filter configuration problem.

use eqlogparser if you want a #RealParse, not mq2dpsadv

"not registering on the meter" - think about it :p

re: hide - yes we use hide in combat, you can't turn that off.

using disarm requires usedisarm to be turned on, turning it off would not allow it to work
 
I was wondering why this wasn't working.

using HIDE and DISARM all the time, so I went into the settings and shut those off. He is still using them all the time no matter what I have them set to (on or off).
Click to expand...

I have it turned off and it still shows Disarm being used in the Plugin Output window. I mean if I turn it OFF then I would think it wouldn't be using that skill anymore, right? And why do the other 5 toons show on DPSADV just not the Rogue? Not sure about the accuracy of the numbers but the other 5 at least show. Hmmm, I am thinking about that.

Thanks for the reply anyways.

Vrak
 
Vrakenor said:
I was wondering why this wasn't working.



I have it turned off and it still shows Disarm being used in the Plugin Output window. I mean if I turn it OFF then I would think it wouldn't be using that skill anymore, right? And why do the other 5 toons show on DPSADV just not the Rogue? Not sure about the accuracy of the numbers but the other 5 at least show. Hmmm, I am thinking about that.

Thanks for the reply anyways.

Vrak
Click to expand...
Can you show a snip of mq2rogue having disarm off and still using disarm? I wonder if it is autoskilled
 
Thats interesting I have 2 rogues running and they top the dps in both groups one group level 114, the other is level 65 rogue gear on both is less than what I have on my Warrior I mean for the most part the 65 rogue is still in Glooming deeps armor, just need good weapons and haste belt
 
Sic said:
this sounds like a dpsadv configuration / eq filter configuration problem.

use eqlogparser if you want a #RealParse, not mq2dpsadv

"not registering on the meter" - think about it :p

re: hide - yes we use hide in combat, you can't turn that off.

using disarm requires usedisarm to be turned on, turning it off would not allow it to work
Click to expand...

Hmm my rogues are already hitting 6mm in dpsadv. Are we saying it’s under parsing?
 
Naeeldar said:
Hmm my rogues are already hitting 6mm in dpsadv. Are we saying it’s under parsing?
Click to expand...
He's using dpaadv for "parsing" instead of something like gamparse. (I mentioned all this already). But yah sounds like a filters/dpsadv thinfg
 
Sic said:
He's using dpaadv for "parsing" instead of something like gamparse. (I mentioned all this already). But yah sounds like a filters/dpsadv thinfg
Click to expand...
Oh I know I haven’t bothered to use gameparse or something similiar My Rogues are parsing in DPSADV at 6million DPS. Make me wonder if I should crack open a true parser to see if thats on the low end. Sorry for confusion just kind of took me off guard that DPSADV could be that far off, given what I am seeing.
 
Naeeldar said:
Oh I know I haven’t bothered to use gameparse or something similiar My Rogues are parsing in DPSADV at 6million DPS. Make me wonder if I should crack open a true parser to see if thats on the low end. Sorry for confusion just kind of took me off guard that DPSADV could be that far off, given what I am seeing.
Click to expand...
not a discussion for this forum, one is a little more work, but way better results. :hfive:
 
Hello fellow level 125 sneaky backstabbers... When using mq2rogue, are there any type 3 augs prior to LS that I should prioritize that this automation would benefit from?

Thanks
 
You must log in or register to reply here.
Plugin - MQ2Rogue
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -