• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Paladin

Plugin - MQ2Paladin (2 Viewers) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (54) Reviews (8) History Discussion Terms and conditions
Hey Sic, my paaldin used to pull with a spell and now its walking up to everything and swatting them first. Did i change a command or something? I just hit 127 and maybe the new spells arent uploaded? Any help would be appreciated.
 
Dethbrngr said:
Hey Sic, my paaldin used to pull with a spell and now its walking up to everything and swatting them first. Did i change a command or something? I just hit 127 and maybe the new spells arent uploaded? Any help would be appreciated.
Click to expand...
maybe he's just unhappy about you not caring enough to spell his class correct!

nah, was a mistake on my part, will update in a few
 
Sic said:
maybe he's just unhappy about you not caring enough to spell his class correct!

nah, was a mistake on my part, will update in a few
Click to expand...
Weird because I swore i had the latest last night and it was pulling fine. Im assuming it has to do with hitting 127. Thanks for the fast response
 
lvl 10 Paladin wants to spam Courage on a lvl 10 cleric that has a higher buff on.. Not finding a way to stop that from happening outside of using BYOS.. Thoughts?
 
inb4 sic copies from the faq (sorry on mobile so lost the pretty colors)

Q. I appear to be chain casting Brells - or some other spell?
A. There are a few of these buffs that eq/mq reports stack that do not or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built-in EverQuest feature - right-click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

/blockspell add me id
/blockspell add pet id

You can also turn off using brells /pal usebrells off
 
knave23 said:
inb4 sic copies from the faq (sorry on mobile so lost the pretty colors)

Q. I appear to be chain casting Brells - or some other spell?
A. There are a few of these buffs that eq/mq reports stack that do not or will chain overwrite other buffs and you get into a buffing contest with another toon. You either have this situation or some other issues. I would suggest checking for the red error text that eq gives you to tell you WHY it didn't successfully take hold and then go from there. You can block anything you don't want cast. This is a built-in EverQuest feature - right-click on the buff and "add this spell to list of blocked spells" or go through the eq menu -> character -> blocked buffs

EQ Menu -> Character -> Blocked Buffs
EQ Menu -> Character -> Blocked Pet Buffs (to add to anyone's pet blocked spells)

/blockspell add me id
/blockspell add pet id

You can also turn off using brells /pal usebrells off
Click to expand...
thx
 
I've got paladin grouped with a cleric. I have groupwatch set to Cleric only but it is pausing for a full group med when just the paladin is oom as well. at around mid 40s range paladin is just burning mana on nuking and cleric is full

is there something I'm doing wrong or is this correct behavior?
 
This plugin changed my perspective. I used to be a "Warrior" box but then, realized paladin can do much more with plugin help and he became my main tank.
Its helpfull concentrate in a lot else and yet, let the plugin rez, splash and more.
One of my "need to have" ones.
If ya not tried it yet, do it!
 
isotopemodeller said:
I've got paladin grouped with a cleric. I have groupwatch set to Cleric only but it is pausing for a full group med when just the paladin is oom as well. at around mid 40s range paladin is just burning mana on nuking and cleric is full

is there something I'm doing wrong or is this correct behavior?
Click to expand...
Show me where group watch is reporting the rest of the group.

We *always* watch ourselves. So if you mean "the paladin" instead "full group med"

Adjust your med start and med end.

If you don't like the load out you can byos
 
The Ancient One said:
This plugin changed my perspective. I used to be a "Warrior" box but then, realized paladin can do much more with plugin help and he became my main tank.
Its helpfull concentrate in a lot else and yet, let the plugin rez, splash and more.
One of my "need to have" ones.
If ya not tried it yet, do it!
Click to expand...
Yeah, I've run a few paladins from 0 to max (or stopped them at specific level rangers for pl reasons - 60s, 85/90, 110), I think they're underrated.

I don't like *driving* a paladin as much as a war or sk, not enough of their toolkit has kept with SK and "modern" gameplay with regards to insta or nsar insta cast spells
 
Sic said:
Show me where group watch is reporting the rest of the group.

We *always* watch ourselves. So if you mean "the paladin" instead "full group med"

Adjust your med start and med end.

If you don't like the load out you can byos
Click to expand...
Is this what you mean?

[MQ2Paladin]:: Paladin: Mana Current: 29.0 Starting Threshold: 30.
[MQ2Paladin]:: I need to rest.
[MQ2Paladin]:: Cleric: Mana Current: 76.0 Ending Threshold: 90.
[MQ2Paladin]:: Paladin: Mana Current: 29.0 Ending Threshold: 90.

Starting med is 30, ending med is 90
groupwatch set to "Cleric Only"

I don't dislike the loadout. I want him to go through his mana, but I just don't want him to stop pulling when he's low.I just added that in my comment because it's around this level that the paladin first had mana issues relative to the cleric
 
isotopemodeller said:
Is this what you mean?

[MQ2Paladin]:: Paladin: Mana Current: 29.0 Starting Threshold: 30.
[MQ2Paladin]:: I need to rest.
[MQ2Paladin]:: Cleric: Mana Current: 76.0 Ending Threshold: 90.
[MQ2Paladin]:: Paladin: Mana Current: 29.0 Ending Threshold: 90.

Starting med is 30, ending med is 90
groupwatch set to "Cleric Only"

I don't dislike the loadout. I want him to go through his mana, but I just don't want him to stop pulling when he's low.I just added that in my comment because it's around this level that the paladin first had mana issues relative to the cleric
Click to expand...
yes, he is resting for himself, which we always watch
 
isotopemodeller said:
Is this what you mean?

[MQ2Paladin]:: Paladin: Mana Current: 29.0 Starting Threshold: 30.
[MQ2Paladin]:: I need to rest.
[MQ2Paladin]:: Cleric: Mana Current: 76.0 Ending Threshold: 90.
[MQ2Paladin]:: Paladin: Mana Current: 29.0 Ending Threshold: 90.

Starting med is 30, ending med is 90
groupwatch set to "Cleric Only"

I don't dislike the loadout. I want him to go through his mana, but I just don't want him to stop pulling when he's low.I just added that in my comment because it's around this level that the paladin first had mana issues relative to the cleric
Click to expand...
You basically have to swap to a different puller if u want to ignore the mana that the pally is at, and only worry about the cleric. (so a monk/bard/anything else that might not go OOM b4 the cleric) OR, set your pally to use less spells at that level.
 
I may have accidentally discovered one cool trick™, but is paladin meant to hit shield flash and deflection simultaneously? Seen it a few times and not on my sk so wasn't sure
 
knave23 said:
I may have accidentally discovered one cool trick™, but is paladin meant to hit shield flash and deflection simultaneously? Seen it a few times and not on my sk so wasn't sure
Click to expand...
no
we use shield deflection first, and then we check that you don't have deflection up (and it isn't ready) before using shield flash.

you might be having the server lag where your active disc takes a while to register
 
Hello,

Still learning the ropes and tried looking into this my self but is there a paladin ability that knocks back? i have tested my other boxes and its defiantly the paladin thats causing it.

What would be causing this ?
 
Magefury5 said:
Hello,

Still learning the ropes and tried looking into this my self but is there a paladin ability that knocks back? i have tested my other boxes and its defiantly the paladin thats causing it.

What would be causing this ?
Click to expand...
some spell lines have "push", what is it you mean by "knockback" like LessonStun

Divine Stun AA also has it
 
Sic said:
some spell lines have "push", what is it you mean by "knockback" like LessonStun

Divine Stun AA also has it
Click to expand...
Hey thank you so much. The second you said divine stun AA i realzied i recently swapped it in to try.

Also push and knockback for me are the same thing. are they different in EQ?
 
Magefury5 said:
Hey thank you so much. The second you said divine stun AA i realzied i recently swapped it in to try.

Also push and knockback for me are the same thing. are they different in EQ?
Click to expand...
i just wanted to clarify - sometimes when people say knockback they mean like a "get the fuck away from me" across the room kinda thing rather than a "back up" kind of shove
 
Big fan of the CWTN/Sic plugins. This is my first time playing a Paladin (almost always SK), so apologies if I'm missing something obvious.

Disarm doesnt seem to be firing. I'm level 28 and have it checked/enabled, but it doesn't seem to activate at all. Is this a known issue at low levels, or is there a setting I'm missing?

When undead nuke is memmed it just chain-casts continuously. I didn't see an option to throttle it or define behavior based on mana, etc. When I am manual, I like to pull with the nuke, but it chain casting feels like a DPS loss compared to getting auto attacks in. Is there any way to control how aggressively it casts, or is enabling BYOS and just taking it off the bar the best method at the moment?

Thanks for all the work that goes into these plugins.
 
stick112 said:
Disarm doesnt seem to be firing. I'm level 28 and have it checked/enabled, but it doesn't seem to activate at all. Is this a known issue at low levels, or is there a setting I'm missing?
Click to expand...
disarm just uses your disarm skill


stick112 said:
undead nuke
Click to expand...
what spell? "Ward Undead" out of our group "doctrine"

no, there's no nukemanamin or anything - for our tanks things are pretty much "always be casting"

stick112 said:
Is there any way to control how aggressively it casts, or is enabling BYOS and just taking it off the bar the best method at the moment?
Click to expand...
yeah you'd want to byos and take it off the bar
 
Sic said:
disarm just uses your disarm skill



what spell? "Ward Undead" out of our group "doctrine"

no, there's no nukemanamin or anything - for our tanks things are pretty much "always be casting"


yeah you'd want to byos and take it off the bar
Click to expand...
Thanks Sic - for the disarm skill, Im just not seeing it be used at all.

Everything else makes sense, and yeah was referring to Ward Undead, etc - BYOS makes sense though for what I was looking to do.
 
stick112 said:
Thanks Sic - for the disarm skill, Im just not seeing it be used at all.
Click to expand...
do you have the skill? for some reason for paladin we have the skill require level 40 but it looks like all other classes except paladin we removed the hard coded level check, so i'll take a look and fix that
 
Sic said:
do you have the skill? for some reason for paladin we have the skill require level 40 but it looks like all other classes except paladin we removed the hard coded level check, so i'll take a look and fix that
Click to expand...

I do have it, but don't recall exactly what level I got it. Not really game breaking but figured I'd ask. Thanks man
 

Attachments

  • Screenshot 2026-05-31 133820.png
    Screenshot 2026-05-31 133820.png
    33.7 KB · Views: 0
You must log in or register to reply here.
Plugin - MQ2Paladin
Next unread thread 🦁

Users who are viewing this thread

  • N
  • ... and 1 more.
    • Total: 3 (members: 2, guests: 1)
    Back
    Top
    Cart

    Cart

    Total -