Plugin - MQ2Monk 3.1.52471.11

[Kar]

For some reason I don't see monk using Ton Po's Stance

 

[Sic]

For some reason I don't see monk using Ton Po's Stance

Ton Po's get's used during Speed focus and during palm disc - and it will also check to ensure you don't have destructive Force or Focused Destructive force due to stacking

MQ2Monk Video - I talk about the burn logic

are you saying you used to see it do it and it no longer does or are you saying you have never seen it do it?

 

[Shadow07]

Sic,
I can not get my monk to use pull items that he has in both slots; he is still using combat abilities instead. Maybe, if you have time, can you make one of those great videos that you make so well in explaining how to use it and swap the bandolier back to 2 hand blunt. If that is at all possible? Sorry, I am a very kinetic learner. Thank you for all that you do.

Thank you,
Shadow07

 

[Swoodsy]

how do you remove a mob from monk ignore

 

[Sic]

how do you remove a mob from monk ignore

you have a pullignores.ini file in your release folder - for now you can edit it from there --- IMPORTANT: Ensure you leave the first "|" pipe

from

[PoKnowledge]
Ignored=|Bob

to

[PoKnowledge]
Ignored=|

 

[dontrootmebro]

"This is used in pull modes to "watch" your group
/monk Groupwatch 1/2/3/4 (all/Healer/CCHealer/Self)"

modes 2 and 3 are reversed

 

[Sic]

"This is used in pull modes to "watch" your group
/monk Groupwatch 1/2/3/4 (all/Healer/CCHealer/Self)"

modes 2 and 3 are reversed

aye, this is "on the list" of things to fix - its with all of the cwtn plugins not just monk

 

[ChatWithThisName]

Fixt

 

[dontrootmebro]

Is there a command to change when the monk uses Swift Tails Chant? Not sure what it is set at, but he seems to hardly ever use it, despite being down on endurance.
Also the monk keeps FDing while a mezzed mob has him on target, is there way to change that setting?

 

[Sic]

Is there a command to change when the monk uses Swift Tails Chant? Not sure what it is set at, but he seems to hardly ever use it, despite being down on endurance.
Also the monk keeps FDing while a mezzed mob has him on target, is there way to change that setting?

no command to change when swift tails is used - right now i have it set to check the group for less than 60 (this also checks for stacking and all that goodness --- and you will need to ensure you have /plugin mq2kissbuffs load on everyone to ensure they are in the buff file otherwise they will be skipped

if you are one of the non tank modes and you have greater than 80% aggro, you will use your FD - you can turn off usefeign if you don't want to feign.

 

[ycleptjah]

My monk isn't quite burning properly using a blank KA ini in manual mode with Burn Always on...doesn't appear to be using Swift Tails ever and uses Destructive Force/Eagle's Poise very rarely (even with Terrorpalm and other abilities up), and also sometimes just randomly uses Heel without anything else up.

Also, my extremely small contribution, none of the timers are used up by Distant Strike. So you could potentially add that in there for an incredible ~1 DPS and a stupid amount of plugin window spam. Also for those monks out there *really* looking to make bando swap worth it, use a Darkened Brell's Keg Popper as the 1her you're attempting to proc Fists of Fury with. You will also likely proc Yaulp from it during that time (provided you aren't ranger buffed), and the combo of Yaulp + Fists of Fury would almost certainly more than make up for the DPS loss from not using a 2hb for that period of time once you switch back. Also Fists of Fury does proc from 2hers, but not nearly as often as it does from 1hers.

 

[Sic]

My monk isn't quite burning properly using a blank KA ini in manual mode with Burn Always on...doesn't appear to be using Swift Tails ever and uses Destructive Force/Eagle's Poise very rarely (even with Terrorpalm and other abilities up), and also sometimes just randomly uses Heel without anything else up.

Also, my extremely small contribution, none of the timers are used up by Distant Strike. So you could potentially add that in there for an incredible ~1 DPS and a stupid amount of plugin window spam. Also for those monks out there *really* looking to make bando swap worth it, use a Darkened Brell's Keg Popper as the 1her you're attempting to proc Fists of Fury with. You will also likely proc Yaulp from it during that time (provided you aren't ranger buffed), and the combo of Yaulp + Fists of Fury would almost certainly more than make up for the DPS loss from not using a 2hb for that period of time once you switch back. Also Fists of Fury does proc from 2hers, but not nearly as often as it does from 1hers.

yeah definitely not adding in distant strike just to spam for 1dps

 

[ycleptjah]

yeah definitely not adding in distant strike just to spam for 1dps

Yea, couldn't think of anything else, solid plugin. Any advice on the burn issues?

 

[scoops420]

Hola amigos! I notice my monk is not using Destructive force on burns. AoEcount set to 2, and UseAoE is on. Thoughts?

 

[ChatWithThisName]

Was ton po's stance in use?

 

[scoops420]

Negative Ghostrider. I've been extensively testing today. I can not get monk to fire Destructive Fury, ever.

 

[scoops420]

Monk is using Destructive Force today, only thing changed was a restart of the machine. Apologies for any confusion

 

[scoops420]

I was wrong. "burnalways" was checked and that's why he was using Destructive force.

WIth "burnalways" off, monk will not use destructive force the last 3 hours with "useaoe" = ON, and no matter what I set AoECount to.

had many 5 pulls with aoecount set to 2 & 1, (with a keen eye on TonPos Stance )

 

[surfdog21]

Burnalways on ftw!

 

[scoops420]

Burnalways on ftw!

On a 5 to 10 hour quarantine grind, im out of endurance and need the burns for 6 pulls + named !

 

[Kar]

Hello, Is it possible to add an option to assign an assist manually to monk and berzerker plugins? I am using multiple groups and going raid takes too much XP.

 

[ChatWithThisName]

If you're referencing assist from out of grp, the plugin doesn't currently have logic to handle this option. It's one of the few times I recommend using a blank kissassist ini with the option UseMQ2Melee set to 0. You would run the plugin in manual mode. This would allow them to automatically assist.

 

[Kar]

That works great! Thank you for the advice.

 

[nizadar]

with burnalways off and burnallnamed off still blowing its load all the time

 

[Sic]

with burnalways off and burnallnamed off still blowing its load all the time

you have your burncount too low?

 

[jayah]

MQ2Monk Targeting Issues: As of late my monk is spamming his target during the fight on the mob and on my bard. Monk is mode 1. Bard is running Kiss 11.05. Tank is war and marked MA, running MQ2War and in mode 4. Fighting Giants in Kael Drakkel. Acting as if auto follow is on or Nav during fight.

 

[Sic]

MQ2Monk Targeting Issues: As of late my monk is spamming his target during the fight on the mob and on my bard. Monk is mode 1. Bard is running Kiss 11.05. Tank is war and marked MA, running MQ2War and in mode 4. Fighting Giants in Kael Drakkel. Acting as if auto follow is on or Nav during fight.

re-patch (there was a VV update tonight at 9pm est) --- the version that you have was unfortunate timing from moving stuff from development to master

 

[ycleptjah]

Something that would be really cool for this plugin would be a "big burn" option, for fights where you need to unload everything all at once (i.e. 2nd phase of Kael mission). Rather than just hitting Heel/IoT/Dissident combo, could have it hit everything (DF, IoT, Eagle's, Heel, etc.) Or I could be missing something that does this.

 

[Sic]

Something that would be really cool for this plugin would be a "big burn" option, for fights where you need to unload everything all at once (i.e. 2nd phase of Kael mission). Rather than just hitting Heel/IoT/Dissident combo, could have it hit everything (DF, IoT, Eagle's, Heel, etc.) Or I could be missing something that does this.

it uses tier'd burn logic - there are a ton of stacking considerations that make "overloading" stuff a waste.

if you want to do something like that you can just make a multiline social hotkey to load all the things you want to load - but the plugin isn't going to do that

 

[Kyver]

Is anyone else getting aura spam? When I activate the plugin, it constantly tries to load my aura, whether up or not. It will stop long enough to pull and fight, then it's back at it. Sometimes I have to spam click the hotkey just to unload the plugin because there's so much spam.

lvl 75 monk on a TLP server, trying to load disciple's aura.

Thanks!

 

[Sic]

Is anyone else getting aura spam? When I activate the plugin, it constantly tries to load my aura, whether up or not. It will stop long enough to pull and fight, then it's back at it. Sometimes I have to spam click the hotkey just to unload the plugin because there's so much spam.

lvl 75 monk on a TLP server, trying to load disciple's aura.

Thanks!

Wonder if this is a tlp specific issue with aura window - will have to look into it

 

[Sic]

Is anyone else getting aura spam? When I activate the plugin, it constantly tries to load my aura, whether up or not. It will stop long enough to pull and fight, then it's back at it. Sometimes I have to spam click the hotkey just to unload the plugin because there's so much spam.

lvl 75 monk on a TLP server, trying to load disciple's aura.

Thanks!

Ok - we found the issue

It is supposed to be "Disciple's Aura" but instead the infinite infallable wisdom of sony/daybreak it gives "Disciples Aura" - so we'll overload our aura check with the misspelling - it'll be in next update

 

[Kyver]

Ok - we found the issue

It is supposed to be "Disciple's Aura" but instead the infinite infallable wisdom of sony/daybreak it gives "Disciples Aura" - so we'll overload our aura check with the misspelling - it'll be in next update

View attachment 20768

Excellent, thanks! In the meantime it looks like I need to get the baby monk his lvl 70 aura

 

[icingdeath]

I am running this on 2 new 110 monks, I have alliance turned on but they do not seem pop. anything i need to do to fix this?

 

[Sic]

I am running this on 2 new 110 monks, I have alliance turned on but they do not seem pop. anything i need to do to fix this?

if you want to use alliance under 3 toons use /monk forcealliance on

 

[icingdeath]

so today I used my monk mode 6 and every time he would sit he would not stand back up to pull.

 

[Sic]

so today I used my monk mode 6 and every time he would sit he would not stand back up to pull.

did you adjust your groupwatch settings accordingly? I usually run with my groupwatching the healer

(we also have some groupwatch updates coming to help you identify why you are waiting)

 

[icingdeath]

did you adjust your groupwatch settings accordingly? I usually run with my groupwatching the healer

(we also have some groupwatch updates coming to help you identify why you are waiting)

no I did not adjust anything, after he sits he will try to pull, advpath kicks in and he start to spam distant strike but he wont stand up.

 

[Sic]

no I did not adjust anything, after he sits he will try to pull, advpath kicks in and he start to spam distant strike but he wont stand up.

What i'm saying is you will want to adjust your groupwatch settings so it pulls when you expect it to, and you radius/zradius

/monk Radius ## - This is your pull radius
/monk zRadius ## - This is your vertical pull radius

/monk Groupwatch - 1|2|3|4 - Everyone, CC&Healer, Healer, Self
/monk HpMedStart # - percentage of health you want to start waiting at.
/monk HpMedEnd # - percentage of health you want to stop waiting at.
/monk ManaMedStart # - percentage of mana you want to start waiting at.
/monk ManaMedEnd # - percentage of mana you want to stop waiting at.
/monk EndMedStart # - percentage of endurance you want to start waiting at.
/monk EndMedEnd # - percentage of endurance you want to stop waiting at.

 

[hellfyre]

Make sure allow auto stand is on in your eq > options > general