Release MQ2Grind 3.1.52471.11

[allandallis235]

Started running GMM tonight. Pathing is superb. Really liking this instance @ 110 for AA. Great job Hytiek!

 

[Deleted member 241925]

Awesome plugin. Quick question is it just me or does the Shei instance have respawn? I cleared a hall and it repoped. Also around location 4, the tank skips 4 mobs, had it happen twice and got owned.

 

[Boring]

I purchased this about 4 hours ago, but it still says "buy a copy for $50" on the top. I received the emails as proof (Paypal and one from the site too). Thoughts?

 

[apop]

it doesnt show up in your plugins in the vv launcher ?

 

[Boring]

it doesnt show up in your plugins in the vv launcher ?

I got it to show by clicking watch I found under the "Commands" tab (but I had incorrectly assumed I would have a watch under the main page)

 

[godsfshrmn]

Just a PSA... if you have been running this 24/7 since expansion came out and you're tied with the highest level on the server, you're probably drawing attention to yourself. At least that is what I am seeing in guild chat =p

 

[hytiek]

Awesome plugin. Quick question is it just me or does the Shei instance have respawn? I cleared a hall and it repoped. Also around location 4, the tank skips 4 mobs, had it happen twice and got owned.

Yes the zone is respawning. Depending on your DPS you'll stay in the zone longer (slow dps) or shorter time (high dps). I found it to be quite entertaining to watch the group swing down the hallway areas without navigated for 30 minutes back and forth. =)

 

[hytiek]

I purchased this about 4 hours ago, but it still says "buy a copy for $50" on the top. I received the emails as proof (Paypal and one from the site too). Thoughts?

The delay for the NextGrind is due to the RG Website sync'ing the normal license and the Next license. It's sync'd every 4 hours, this is a pain we have to deal with until we only support Next. Please do not download the MQ2 version and copy into Next folder, it won't work. You need to wait for the NextGrind to appear in your launcher.

 

[Oeasyo]

The delay for the NextGrind is due to the RG Website sync'ing the normal license and the Next license. It's sync'd every 4 hours, this is a pain we have to deal with until we only support Next. Please do not download the MQ2 version and copy into Next folder, it won't work. You need to wait for the NextGrind to appear in your launcher.

Just for situational awareness, I purchased last night and it still didn't show up yet in Next launcher. I think its on hold until legacy mq2 is updated.

 

[hytiek]

Just for situational awareness, I purchased last night and it still didn't show up yet in Next launcher. I think its on hold until legacy mq2 is updated.

@Redbot is this situation known?

 

[hytiek]

it doesnt show up in your plugins in the vv launcher ?

From a naming convention point of view, the launcher, is the RG Launcher. VV is one of the builds that is presented / supported currently.



Live = VV

 

[Redbot]

@Redbot is this situation known?

Nope, unable to replicate

 

[eqjunky2020]

No major rush but I cannot figure out everytime the task recycles the Check Mark goes back on the WaitForLoot on the UI. I have tried manually editing the INI file and unchecking in the UI and no matter what I do it reverts after the mission. Am I doing it wrong?

 

[hytiek]

No major rush but I cannot figure out everytime the task recycles the Check Mark goes back on the WaitForLoot on the UI. I have tried manually editing the INI file and unchecking in the UI and no matter what I do it reverts after the mission. Am I doing it wrong?

For which grind are you having this issue in?

 

[hytiek]

Just an update with the release of ToL instance for Grind, I'm tracking 2 bugs that I'll start working on tonight:

1) Seems there are a few people who have managed to NPC swing up to the worry npc's, I tested and tested and never got there, but it happened. Sorry to those that this affected.
2) Seems that the fix I applied to refresh the campfire ... isn't working 100%. I'll look into this as well.

 

[Slayervtx]

Since the last update, this seems to now skip the northern-most room in the GD instance. I am using Next.

 

[eqjunky2020]

Crusaders is the mission I have been using in Cobalt Scar where it is reverting to wait for loot each time. If I set it with the UI to Not wait for loot it will in fact skip waiting " once " then the next run be back to Waiting for loot.

 

[vanemon]

great plugin!!! though since the last patch i get spammed with all the move commands in mq2 and main window - can you tell me, how to turn this off? (restless assault) thanks!

 

[hytiek]

Since the last update, this seems to now skip the northern-most room in the GD instance. I am using Next.

As GD/Restless Assault was remapped - check your SafeMode settings. RA now goes to 32 locations instead of previous 35. I would recommend running it w/o SafeMode to see how you like the changes.

 

[vanemon]

As GD/Restless Assault was remapped - check your SafeMode settings. RA now goes to 32 locations instead of previous 35. I would recommend running it w/o SafeMode to see how you like the changes.

i run it

 

[hytiek]

Crusaders is the mission I have been using in Cobalt Scar where it is reverting to wait for loot each time. If I set it with the UI to Not wait for loot it will in fact skip waiting " once " then the next run be back to Waiting for loot.

Ah ok that makes so much more sense. That's because the zone is configured to "WaitForLoot" as it's mostly there to get the Collectibles, not that it's a great zone to XP. I can see your point and I'll disable the forced WaitForLoot and make it only configuration related. Thank you for letting me know about it!

 

[vanemon]

grrr - run it without safe, and its a lot more xp so far.... just my mq2window gets spammed

 

[hytiek]

great plugin!!! though since the last patch i get spammed with all the move commands in mq2 and main window - can you tell me, how to turn this off? (restless assault) thanks!

That "spam" is beefy, sorry. The reason you are seeing that, is you have dannet localecho enabled. To "hide" the spam, run: /dnet localecho off

 

[vanemon]

That "spam" is beefy, sorry. The reason you are seeing that, is you have dannet localecho enabled. To "hide" the spam, run: /dnet localecho off

great!!! thanks - really a TOP plugin! and dnet localecho ff worked!

 

[eqjunky2020]

Aaryonar is doing the same thing and will not allow the WaitForLoot to be disabled other than once

 

[Deleted member 241925]

Does the plugin support Parley for Power the 117 SK spell? Everything was working until I leveled up and got new spells now it spams about not having a spell memorized.

Update: Doing BOYS and usingthe old one fixed it. Looks like grind might need an update. Unless I missed an update today.

 

[Sic]

Does the plugin support Parley for Power the 117 SK spell? Everything was working until I leveled up and got new spells now it spams about not having a spell memorized.

Update: Doing BOYS and usingthe old one fixed it. Looks like grind might need an update. Unless I missed an update today.

you should consider changing your grind config

it is your grind config that is telling it to cast the old spell

 

[Deleted member 241925]

you should consider changing your grind config

it is your grind config that is telling it to cast the old spell

I see now I had used the GUI to config it. Thanks

 

[hytiek]

Aaryonar is doing the same thing and will not allow the WaitForLoot to be disabled other than once

It will continue to do so until there's a push of source, which I have not done yet. I have a few bugs that I want to fix still.

 

[Deleted member 241925]

Hi,
When you click the "Default Setting To button" under SK for CWTN, it will default to "Protest for Power" instead of "Parley for Power" at 117+. Would it be possible to have multiple profiles for tanks? I know I can edit it in the UI/Config but when I click the button/edit the config for my warrior. I need to go back and edit it again for my SK. I run 2 groups concurrently with a 3rd Paladin based group in progress. Maybe there is a multiple group trick I am not aware of.

 

[damination]

question is there any sort of trial for this plugin or just have to buy it and try it out?

 

[Myndbender]

my tank keeps running by a group of mobs around WP 3-4 in ToL and getting a mini train and dying.

 

[Gman]

question is there any sort of trial for this plugin or just have to buy it and try it out?

Not a direct answer to your question, but mq2grind is worth every penny. It does the grind so you don’t have to.

-G

 

[Butters]

I've got mq2war mq2cleric mq2shaman, but my bard doesn't automate in an instance. What's the best way to automate a 110 bard in an instance?

 

[Sic]

I've got mq2war mq2cleric mq2shaman, but my bard doesn't automate in an instance. What's the best way to automate a 110 bard in an instance?

what do you normally use for your bard?

use that

 

[Butters]

what do you normally use for your bard?

use that

Nothing, manual. Sometimes Kissassist, but I haven't found a good provide that will autoattack and mez.

 

[redeqcrap]

Nothing, manual. Sometimes Kissassist, but I haven't found a good provide that will autoattack and mez.

Sic's ToL 120 Bard

[General] KissAssistVer=0 TwistOn=1 TwistMed=11 TwistWhat=11 12 7 3 1 4 XTSlot=0 Role=assist CampRadius=30 CampRadiusExceed=400 ReturnToCamp=0 ChaseAssist=0 ChaseDistance=25 MedOn=1 MedStart=20 MedCombat=0 LootOn=0 RezAcceptOn=1|90...

www.redguides.com

 

[Butters]

Sic's ToL 120 Bard

[General] KissAssistVer=0 TwistOn=1 TwistMed=11 TwistWhat=11 12 7 3 1 4 XTSlot=0 Role=assist CampRadius=30 CampRadiusExceed=400 ReturnToCamp=0 ChaseAssist=0 ChaseDistance=25 MedOn=1 MedStart=20 MedCombat=0 LootOn=0 RezAcceptOn=1|90...

www.redguides.com

Thanks, but right now he's only 110, so I'm not sure thats going to work. (I tried Sic's 110 bard and it doesn't crowd control or autoattack)

 

[redeqcrap]

Thanks, but right now he's only 110, so I'm not sure thats going to work. (I tried Sic's 110 bard and it doesn't crowd control or autoattack)

Then have you tried RGMercs? https://www.redguides.com/community/resources/rgmercs.1013/updates#resource-update-5284

 

[hytiek]

Hi,
When you click the "Default Setting To button" under SK for CWTN, it will default to "Protest for Power" instead of "Parley for Power" at 117+. Would it be possible to have multiple profiles for tanks? I know I can edit it in the UI/Config but when I click the button/edit the config for my warrior. I need to go back and edit it again for my SK. I run 2 groups concurrently with a 3rd Paladin based group in progress. Maybe there is a multiple group trick I am not aware of.

Hey there - We are very spoiled with the CWTN plugin suite. I do have a want/ticket open to add some intelligence of default values based on Level; it's a very valid ask.

I've debating about the best way to handle the configuration to support multiple Tank types on the same PC and constructed this configuration (instead of code):

GTPullDistCmd=/docommand ${If[${Me.Class.ShortName.Equal[SHD]},/multiline ; /cast Protest for Power; /face; /timed 20 /nav target log=off; /timed 25 /attack on,${If[${Me.Class.ShortName.Equal[WAR]},/ranged,/mac kissassist tank]}]}

So to explain this mess... this will check if you are SHD, if so, it will used Protest for Power (update as you want). Then the next reference you'll see WAR; so if not SHD, then this checks if you are a WAR and if so, uses /ranged; if you are not SHD nor WAR, then it runs kissassist in tank mode.

I hope this helps you.