-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
It would only do it if mobs got on their Xtarget, which means pairing them with a healing Xtarget healing is key
we auto detect if you're using eqbc or dannet, and then we broadcast when we go to mez
/bcga for eqbc or /dgtell all for dannet
if you;re using chaotic, we don't broadcast that particular spell.the problem is, it is not doing it, thoughshe is mezzing to her heart's content but I cannot see it from my tank. She is out of group but of to uses /dgtell that shouldn't be an issue, right?
i don't know what your issue is - probably dannet, but this is another "just let the plugins do their job". you don't have faith that mezzes are happening when they should?
also - why are you neglecting your toon by sticking them out of group - i hope you read the stuff about how that functions, because out of group assisting directly, isn't supported.
an empty gem can happen depending on your settings
we use alliance or night's terror there (with usealliance or usenightsterror respectively) if you have alliance off, and already have night's terror elsewhere due to other settings, that gem is empty
block the illusion portion of it on toons you don't want the illusion on - otherwise we're going to recast it on them
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
Would suggest to reform your group, and check assist value, and mana settings - there were no cha ges to assisting, chase or otherwise
no, that isn't the whole story
Docility is in our "PBAeMez" group and Ensorcelling Wave is in our "TargetRingAEMez" group, and we memorize TargetRingAEMez if it is equal or higher level
Ensorcelling Wave is 84, and Docility is 83, so we would memorize Ensorcelling over Docility - but Docility over Quelling
which is what we do
If you are lvl 83
if you are 84
if you are 79
so this is how it is designed, you can byos/byoscustom if you wanted to use a different line - like using pbaemez instead of the target ring ae mez
Docility is in our "PBAeMez" group and Ensorcelling Wave is in our "TargetRingAEMez" group, and we memorize TargetRingAEMez if it is equal or higher level
Ensorcelling Wave is 84, and Docility is 83, so we would memorize Ensorcelling over Docility - but Docility over Quelling
which is what we do
If you are lvl 83
if you are 84
if you are 79
so this is how it is designed, you can byos/byoscustom if you wanted to use a different line - like using pbaemez instead of the target ring ae mez
justice4all
Member
- Joined
- Feb 8, 2023
- RedCents
- 241¢
Not sure if I should post this in this forum or the M2Qgrind forum. We have a group with an enchanter running in darkness howls. At the end the enchanter brought a mez'd Orc to the final location. M2Qgrind had the character's paused waiting to drop task and zone out. The orc lost mez and slaughtered the whole group while they were paused.
Any suggestions and or advice is appreciated. I'm helping my wife set her own group up and she was so excited she made it through a complete run with no problems. Then watched them get slaughtered. Yes, she can un-pause and take care of the orc, but not if she wants to step away from the computer. Her group is lvl 100 SK, War, Paladin, Cleric, Berserker, and Enchanter. My group is higher level than hers and my enchanter doesn't mez nearly as often as her's does.
Any suggestions and or advice is appreciated. I'm helping my wife set her own group up and she was so excited she made it through a complete run with no problems. Then watched them get slaughtered. Yes, she can un-pause and take care of the orc, but not if she wants to step away from the computer. Her group is lvl 100 SK, War, Paladin, Cleric, Berserker, and Enchanter. My group is higher level than hers and my enchanter doesn't mez nearly as often as her's does.
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,379
I think it's just a conflict of automation.
One, I would say a mezzed mob isn't the same as a charmed mob and you cannot "bring" a mezzed mob anywhere, a mezzed mob is stationary. If you're referencing a charmed mob, I would say not to use charm while grinding to avoid this undesired behavior. Both automations are doing as they are instructed to do.
If you are saying you mezzed a mob at the final location and the mob was removed from the xtarget window, I would expect the tank would still engage it, as you are grinding. Perhaps a note about this sort of behavior may need clarity from Hytiek. Either way the details matter in regards to mez or charm.
justice4all
Member
- Joined
- Feb 8, 2023
- RedCents
- 241¢
Yes, it would be a charmed mob that showed up in the xtarget window and followed the group the final location. I think turning use charm off would be the best solution. Thanks for the prompt reply. The plugins are amazing by the way. They have opened up a lot of new content for us to explore by allowing us to play more than one character. Love the plugins and highly recommend them.
eq has a bug where sometimes charmed mobs can end up on xtarget, unfortunately nothing we can do about that
Klavs34500
Member
- Joined
- Feb 7, 2018
- RedCents
- 103¢
Hello Guys, i have an issue with my MQ2ench, it was working well with the mez when mob are kinda the same lvl as me. But if i want to mez higher lvl mob it will just tash and slow and never mez anything. Manually it s working. Is there an option to mez higher lvl mob ? Thanks !
It mezzes anything it thinks it can.
Check your mez ignores and your automezimmune settings
- Joined
- Dec 22, 2016
- RedCents
- 118¢
I am on Vanikki server at 75, and this does not haste buff anything but pets. My box crew definitely would like to see lower level group haste cast. The mez portion lower than 85 is hit or miss as well. Just my two cents. Otherwise I LOVE this plugin.
Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
Please check the "how to ask for help" post. can you please use actual names of things that you think it should be doing that it isn't.
lvl 75 group haste is "Hastening of Ellowind" and before that is "Hastening of Salik" at 60 off the top of my head i don't know what expansions those are out in, but we would use either of those that you had.
lvl 72 single haste is "Speed of Ellowind", and before that is "Speed of Salik" at 67 both of which are also in the plugin, and we would use those.
We would only single-target haste if the single-target haste is better haste than the group haste you have. or it could be something that mq is reporting doesn't stack - but again, without more information than "shitter's clogged" I can't help you.
"hit or miss" isn't useful or helpful in any meaningful way that could result in me offering help, giving input, or making any changes either. My "zero information wild guess" is you have the TLP issue where level restrictions are different for your spells but MQ doesn't know > like here <
- Joined
- Dec 22, 2016
- RedCents
- 118¢
Nope, not really. We're gonna handle aggressive moves appropriately.
You have have all your toons use their de-aggro with the not-listed-in-commands-on-purpse dumappro - /cwtna dumpaggro
Doesn't look like it did via the link but did https://github.com/macroquest/macroquest/issues/667 ever get fixed for the Vaniki +10 lvl bump on mez or was there any work around available? Just checking before I get going on the chanter again!
no, that is still an open MQ issue
AimlessRooster
New member
- Joined
- Jan 31, 2023
- RedCents
- 7¢
I just purchased MQ2Enchanter tonight, logged into my enchanter (a level 100 heroic I also just purchased), loaded the plugin and it started to memorize the spell lineup until it got about 4 spells memorized and then it crashed. I've tried several different things. Rebooted the PC, reinstalled MQ2, reinstalled MQ2Echanter. None of these have resolved the issue, and I'm not sure what else I can try. Now when I try to login it will crash within about 5 seconds after loading in. I have 8 other CWTN plugins and I am not having this issue with any of the other plugins. I play on live and I'm including a screenshot of the crash window that pops up. If there's any other info that maybe helpful I can provide that too. Thanks in advance for any help.
Please post in the correct location. you don't need your very own mq2enchanter thread, there is a vibrant and robust one already.
And please patch, there was a rebuild after the patch tonight, if you're not running the latest build, you should.
And please patch, there was a rebuild after the patch tonight, if you're not running the latest build, you should.
AimlessRooster
New member
- Joined
- Jan 31, 2023
- RedCents
- 7¢
Apologies on the post being in the wrong spot. I double checked EQ to make sure I was patched up to the most current and also validated the game install. Then reinstalled mq2 and mq2enchanter again using the redguides launcher. Attempted to login to the enchanter again and got the same crash.
there was an issue with the build server.
once the RG server rebuilds, you can patch and be on your way.
sorry about the problems.
AimlessRooster
New member
- Joined
- Jan 31, 2023
- RedCents
- 7¢
I'll keep an eye out for the rebuild, and thanks for such a quick response. Wasn't expecting to hear anything until tomorrow. Love the products you guys provide.
Hello, on Test, I noticed my enchanter lvl 73, running MQ2Enchanter, was mezzing every mob that was pulled, even singles. It casts Bewilderment, then tash and slow as configured. Is this normal behavior? The screen capture below is basically repeated for each pull. It does mez adds correctly because its basically mezzing everything 
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,397
Who is the puller (main assist? Random character with no affiliation to the MA?)Hello, on Test, I noticed my enchanter lvl 73, running MQ2Enchanter, was mezzing every mob that was pulled, even singles. It casts Bewilderment, then tash and slow as configured. Is this normal behavior? The screen capture below is basically repeated for each pull. It does mez adds correctly because its basically mezzing everything
View attachment 48251
Is the groups Main assist assigned?
The enchanter will mez anything that isn't the MA's target automatically.
Paladin is main tank and main assist. The GUI kind of shows the crossed swords and shield emblem overlapped.
Rogue is puller and has the puller icon.
Rogue is set to Puller Assist. Paladin is set to Tank. Everyone else is set to Assist. All chars are in camp mode using //boxr camp.
The enc will mez before pal has incoming mob targeted. The mez and engagement of pal seem to happen nearly at the same time.
I think I figured it out. Paladin had camp radius set to 40. Everyone else had camp radius set to 60. So mob was getting inside enc camp radius before paladin engaged it and enc mezzed it. Thanks!
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #1,400
If they enter the enchanters camp radius and are not the MA's target, the enchanter will mez. If the enchanter is in a chase mode then the enchanter will use a radius around themselves the size of their campradius.
If the enchanter is mezzing sooner than you'd like and you are in a camp mode, try reducing your camp radius to be a little smaller than the tanks camp radius. You can see the camp on the map by making sure layer 3 is visible.
If the enchanter is mezzing sooner than you'd like and you are in a camp mode, try reducing your camp radius to be a little smaller than the tanks camp radius. You can see the camp on the map by making sure layer 3 is visible.