• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Enchanter

Plugin - MQ2Enchanter 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (117) Reviews (34) History Discussion Terms and conditions
DarkPaladin said:
I thought you weren't supposed to use MQ with progression servers? Or they were going to patrol them harshly?
So I didn't even think of that. Yeah useful them for sure!
Click to expand...
mq2 doesn't run on trubox servers - one of the newer servers, Rizlona, isn't truebox, and was made with the specific idea of people multiboxing
 
Redbot updated MQ2Enchanter with a new update entry:

12/31/2020

- Will again memorize spells and buff in manual mode.
- Will now buff Night's Terror if you don't have mnemonic retention.
- Will now buff PolyUnity if you don't have mnemonic retention.
- /enc SumAzureAt - What mana % minimum to summon Azure Crystal.
- /enc UseAzureAt - What mana % to use Azure Crystal.
- /enc SumSanguineAt - What mana % minimum to summon Sanguine Crystal.
- /enc UseSanguineAt - What mana % to use Sanguine Crystal.
-...
Click to expand...

Read the rest of this update entry...
 
New patch introduced a really obnoxious spam target issue with AAs which we didn't catch until after Red re-built for us.
We can't push pre-release plugin updates directly, so you will have to download this file manually.
Sorry for the troubles.

All good patch as normal.
 
Last edited:
Was getting lot of errors tonight. Believe it had to do with saving names to mezimmune file was in the Deep and seemed to happen while mezzing. Regardless I have a bunch of .dmp files for @eqmule (was 139 files zipped so hope they went thru)
 
Draknocht said:
Was getting lot of errors tonight. Believe it had to do with saving names to mezimmune file was in the Deep and seemed to happen while mezzing. Regardless I have a bunch of .dmp files for @eqmule (was 139 files zipped so hope they went thru)
Click to expand...
plz pm mq2enchanter .dmps to cwtn and me plz

we only need 1 or 2, we don't need 139 of them
 
YOU ROCK!

I use several plugins including ESK, CLR, Monk, Zerk and have started testing the enc and shammy ones. The cleric one is so efficient that he never really runs below 80% before the group is at 20% mana. so I havent run into this until now. Is there a way to have them use mod rods if they have them? I haven't found a setting but admit I could easily have missed it.

I will buy these as soon as they go live, this is really amazing work.
 
Tawk said:
YOU ROCK!

I use several plugins including ESK, CLR, Monk, Zerk and have started testing the enc and shammy ones. The cleric one is so efficient that he never really runs below 80% before the group is at 20% mana. so I havent run into this until now. Is there a way to have them use mod rods if they have them? I haven't found a setting but admit I could easily have missed it.

I will buy these as soon as they go live, this is really amazing work.
Click to expand...
you can addclicky it to manaself

so hold it on your cursor and /enc addclicky manaself
 
Wolfborn said:
For the past week my chanter has been too lazy.
In fact he just stands there doing nothing but buffing, no mezzing, no nuking.. nada.
If I turn on melee he will nuke and melee but no mez.
He used to be the king of mezzing. Locking down before you could say "adds in camp"
Do I need to change some settings or something?

I just updated today and still acting the same.
Click to expand...

Make sure that you select the team's main assist and main tank...mine was stuck that way for a little bit...in fact i was grinding for about 30 minutes without realizing it was just iddle...soon as i changed that it worked.
 
Hey Sic, and Cwtn,

I have been having issues with the chanter even after the latest .dll, I have tried both the one that updates with VV and the one you have posted above and both are doing the same, attached you will find both the error message and the .dmp file.

edit: Sorry I am not sure what is happening when it happens but he is in combat and I am on the puller tank not on his screen at the time, and it happens when there is a single mob or when there is a multiple mobs let me know if you need the setting I am using, and this is happening on an all access account, I have not tried one of the free accounts yet.
 

Attachments

Last edited:
Lovemate said:
Hey Sic, and Cwtn,

I have been having issues with the chanter even after the latest .dll, I have tried both the one that updates with VV and the one you have posted above and both are doing the same, attached you will find both the error message and the .dmp file.
Click to expand...

I would double check you are actually using the file from above - because this crash is *not* not the file above, but the one on the launcher that the .dll above fixes.

You need to /bcaa //plugin mq2enchanter unload - unload mq2enchanter on every logged on character - then put the file in your mq2enchanter folder, and then /plugin mq2enchanter load to reload the plugin.

you can't replace the old file if anyone has the file loaded.
 
Lovemate said:
Hey Sic, and Cwtn,

I have been having issues with the chanter even after the latest .dll, I have tried both the one that updates with VV and the one you have posted above and both are doing the same, attached you will find both the error message and the .dmp file.
Click to expand...

I can confirm, been having the same issue on mine. Same screenshots.
 
if you have one from the file above please post/pm it to me and cwtn - but the crash above is using the file on the launcher
 
1610066077883.png 100% launcher's old version of the file and not the one downloaded from this thread.

New one looks like when I look at a dmp.

1610066128350.png
 
Sic said:
I would double check you are actually using the file from above - because this crash is *not* not the file above, but the one on the launcher that the .dll above fixes.

You need to /bcaa //plugin mq2enchanter unload - unload mq2enchanter on every logged on character - then put the file in your mq2enchanter folder, and then /plugin mq2enchanter load to reload the plugin.

you can't replace the old file if anyone has the file loaded.
Click to expand...

Sorry about the confusion I had thought I had replaced the file with the one posted above, as I always shut down EQ, VV and MQ2 to replace files I had thought that VV would not overwrite the downloaded one but it seems it did when I loaded it all back up, I tried a different way to replace the file above with the one in my Release folder by loading up VV and letting it update then I replaced the file before I launched Mq2 and EQ and now it is working fine.

Thank you Very Much.
 
Hi Sic / Chat just wondering does the download dll fix issue with auto group buffing? because my chanter not doing anything :(
 
watching this thing some real issues. Mez priority is out of whack completely. I pull 4 mobs and the thing will tash before mezzing and thats with the setting to tashthenmez false and if you get GOM when tashing it will NUKE before mezzing with 4 adds with no CC attempted at all yet.

You should really mez before anything no matter what especially when its 4 adds.
 
In what circumstances is AE Mez slow? Or causing group to die coz unhandled adds wrecked you?

I’ve thrown MQ2Enchanter at the hairiest stuff I can find, 8+, full XTarget window full of mobs and chanter just locks sh1t down stat. Bottom of Velks Lab Kobolds in Grp Mission or Raid Instance for example. Have also successfully thrown the enchanter into the Firelings achieves in DoomFire missions, and into the social and aggressive Tizmak caves in GD. MQ2Enchanter just brings quiet calm to the sh1tstorm,

I like you use TashThenMez=False, with UseMelee=true, useDot=true, and useNuke=true.

I’m curious now, I will make it a point to tab over and check out what she’s doing, or not doing.

Hy,
PS the only quibble I have with Enchanter is the Nuke DPS weave should cast the 105 Mindsunder, if UseDoT=false, instead of polySomething.
 
Hylander said:
In what circumstances is AE Mez slow? Or causing group to die coz unhandled adds wrecked you?

I’ve thrown MQ2Enchanter at the hairiest stuff I can find, 8+, full XTarget window full of mobs and chanter just locks sh1t down stat. Bottom of Velks Lab Kobolds in Grp Mission or Raid Instance for example. Have also successfully thrown the enchanter into the Firelings achieves in DoomFire missions, and into the social and aggressive Tizmak caves in GD. MQ2Enchanter just brings quiet calm to the sh1tstorm,

I like you use TashThenMez=False, with UseMelee=true, useDot=true, and useNuke=true.

I’m curious now, I will make it a point to tab over and check out what she’s doing, or not doing.

Hy,
PS the only quibble I have with Enchanter is the Nuke DPS weave should cast the 105 Mindsunder, if UseDoT=false, instead of polySomething.
Click to expand...

Mez period seems not to be the 1st priority. He will tash before mez even when the setting is false and if you get a GOM or haze when tashing it will nuke without mezing.

Enchanter is a CC class 1st if you have usemez true it should mez before anything.
 
LOVE this plug in - my Chanter is 113 now and with Bard, Shammy, 2 Zerkers and a Warrior...... mobs in CoV absolutely MELT.
Adds, Chanter locks them down. I can not wait to get her to 115!!!

Thank you !!
 
Is MQ2Enchanter not working for others on Riz? I loaded it up and he won't buff my group. Full mana, not invis, tried assist mode, chase mode, manual mode. Made sure he isn't paused. Tried unloading and reloading the plugin. Tried unloading and reloading MQ2, also tried /enc reload. Won't load default spell loadout and won't buff. All of my other MQ2 plugins work just fine. Not sure what I'm missing/doing wrong.
 
The_Klaw said:
Is MQ2Enchanter not working for others on Riz? I loaded it up and he won't buff my group. Full mana, not invis, tried assist mode, chase mode, manual mode. Made sure he isn't paused. Tried unloading and reloading the plugin. Tried unloading and reloading MQ2, also tried /enc reload. Won't load default spell loadout and won't buff. All of my other MQ2 plugins work just fine. Not sure what I'm missing/doing wrong.
Click to expand...

Did you remember to set your main tank/main assist/campfire? This has happened before where after 30 minutes of it sitting there and me grinding...i go....wait gotta set team...
 
an_image said:
Did you remember to set your main tank/main assist/campfire? This has happened before where after 30 minutes of it sitting there and me grinding...i go....wait gotta set team...
Click to expand...
Yeah. I had my SK set as MA. When I hit my hotbutton to Assist they all set /camphere on. It's weird because it was working last week. I don't recall making any changes that would have caused this. I'll keep banging on it though. It still may be me doing something wrong.
 
all of the CWTN Plugins that buff other group member require the other group members have MQ2CWTNBuff plugin loaded.
The group members must be on the same computer as the enchanter.
They should be in the group with the enchanter.

Not sure why it wouldn't load the default spell loadout as you mention. /enc reload just forces it to update any existing spells if somehow the automatic update didn't happen. It will also display an accurate account of what the plugin thinks is missing. I would try unloading the plugin, then loading the plugin, which isn't the same as /enc reload

/camphere on is not a CWTN plugin command. That's a kiss assist command. You shouldn't be running KA with the enchanter plugin.
 
ChatWithThisName said:
all of the CWTN Plugins that buff other group member require the other group members have MQ2CWTNBuff plugin loaded.
The group members must be on the same computer as the enchanter.
They should be in the group with the enchanter.

Not sure why it wouldn't load the default spell loadout as you mention. /enc reload just forces it to update any existing spells if somehow the automatic update didn't happen. It will also display an accurate account of what the plugin thinks is missing. I would try unloading the plugin, then loading the plugin, which isn't the same as /enc reload

/camphere on is not a CWTN plugin command. That's a kiss assist command. You shouldn't be running KA with the enchanter plugin.
Click to expand...
Yeah, I only run muleassist on my bard. I have all of your plugins for the rest, but occasionally I switch between the two because TLP stuff, ya know. I prefer to run your plugins when I'm grouping. I was just using /camphere as a general term. I only apply the actual //camphere command to my bard. I mimic Sic's hotkeys for camphere on and camphere off.
 
Last edited:
Redbot updated MQ2Enchanter with a new update entry:

01/20/2020

- Added option to broadcast mez.
-- autodetection of eqbc or dannet.
--- defaults to eqbc if both are loaded.
-- dannet uses dgtell all.
-- eqbc will use /bcg.
-- it is defaulted to off.
-- /enc broadcastmez.
- Slow logic adjustments.
- InterruptForMez toggle added. Will interrupt non-mez spells to cast a mez spell
Click to expand...

Read the rest of this update entry...
 
The_Klaw said:
Yeah, I only run muleassist on my bard. I have all of your plugins for the rest, but occasionally I switch between the two because TLP stuff, ya know. I prefer to run your plugins when I'm grouping. I was just using /camphere as a general term. I only apply the actual //camphere command to my bard. I mimic Sic's hotkeys for camphere on and camphere off.
Click to expand...
I blew away the related files for MQ2Enchanter and re-installed. It is working for me now. :)
 
I'm having issues with my chanter mezing mobs after an initial run through of a task.

I'm running MQ2Grind to do AA's with Restless Assault. My chanter does GREAT on the first run through, but then once the second task is started and I am getting multiple mobs, the chanter will never mez. He casts slow, DOTS, everything else, but won't mez. Obviously, I'm not changing the configuration between runs. I've go so far as to unload / reload the plugin but it continues to not mez. Any ideas?
 
ChatWithThisName said:
Try turning on the new option to InterruptForMez
Click to expand...
I have. I tried it both with and without and get the same behavior.

I finally was able to figure it out. The MQ2MyButtons plugin appears to be interfering with it. Once I unloaded that plugin, I was able to go several rounds with the chanter doing his thing.
 
Last edited:
52 Enchanter on Rizlona is casting Boon of the Clear Mind (7 mana regen @ level 52) instead of Clarity II ( 9 mana regen @ level 52)
Is there a reason for this that I am not aware of? I know clarity 1 (9 mana regen @ level 32) is better than Boon of the Clear Mind (6 mana regen @ level 42)
Clarity II doesn't really get any better than Clarity I for a few more levels, but both are still better than Boon of the Clear Mind until level 64 and then it only equals Clarity I.
 
You must log in or register to reply here.
Plugin - MQ2Enchanter
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -