• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Bst

Plugin - MQ2Bst 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (103) Reviews (32) History Discussion Terms and conditions
Chibz said:
No, BYOS is unchecked
Click to expand...
do you have missing spells /bst missing

also if you just slammed through a bunch of levels - try killing your pet and getting a new one. your pet might have the bugged buff thing
 
Highest level missing spell is 107. I will try the pet thing and also starting fresh later if nothing else works.
 
Chibz said:
Highest level missing spell is 107. I will try the pet thing and also starting fresh later if nothing else works.
Click to expand...
?

if it says you're missing something - its because the plugin needs it - not just because its willy nilly about missing stuff.

go and get all your spells first - you only need the highest level spell it spits out for the spell groups (unless for the plugins like shm or clr where you may end up using multiple tiers of a spell) - but if you're missing entire spell groups - then how could it memorize and use those things?
 
Last edited:
Ok, I have been a slacker on missing spells on all my toons, thanks!
 
This is my newest plugin and I was wondering if you have it using Bestial Bloodrage at all? If so when?
 
CazRaX said:
This is my newest plugin and I was wondering if you have it using Bestial Bloodrage at all? If so when?
Click to expand...
I assume you mean Companion's Fury as the bestial bloodrage line was turned into that a while back.

We use it during primary burn when Fury is up - if you don't have fury it would use it under regular burn condition.
 
Sic said:
I assume you mean Companion's Fury as the bestial bloodrage line was turned into that a while back.

We use it during primary burn when Fury is up - if you don't have fury it would use it under regular burn condition.
Click to expand...
Yeah, that one. I say Bestial Bloodrage since that is what the hotkey is called and it is different for Mages and Beasts, just keeps it straight in my head.
 
CazRaX said:
Yeah, that one. I say Bestial Bloodrage since that is what the hotkey is called and it is different for Mages and Beasts, just keeps it straight in my head.
Click to expand...
yeah pretty silly that they missed that part of renaming stuff lol
 
Sic said:
?

if it says you're missing something - its because the plugin needs it - not just because its willy nilly about missing stuff.

go and get all your spells first - you only need the highest level spell it spits out for the spell groups (unless for the plugins like shm or clr where you may end up using multiple tiers of a spell) - but if you're missing entire spell groups - then how could it memorize and use those things?
Click to expand...
Just an update. I rebooted, zoned into Guild Lobby, nothing, zoned into Guild Hall and THEN the 9 through 13 spell gems loaded. I will go and get missing spells, but it looks like things are working normal now. Thanks!!
 
Chibz said:
Just an update. I rebooted, zoned into Guild Lobby, nothing, zoned into Guild Hall and THEN the 9 through 13 spell gems loaded. I will go and get missing spells, but it looks like things are working normal now. Thanks!!
Click to expand...
well, there is literally nothing that is like "hey if we didn't go to lobby and then guild hall dont load spells" so really hard to say. we check if we should memorize spells faster than and more frequently than you can count - so *something* was causing you to not memorize spells.

You should 100% go and get any missing spells, however.
 
Absolutely. The plugins work great and I appreciate as always your immediate assistance to often trivial user side issues.
 
Another quick question since I don't have log on and have not noticed but do the plugins (any/all of them) use BP clicks?
 
CazRaX said:
Another quick question since I don't have log on and have not noticed but do the plugins (any/all of them) use BP clicks?
Click to expand...
not automatically - since bps differ with what effect and when folks would want to use them.

you can add them to addclicky combat / downtime / defensive etc
 
Sic said:
not automatically - since bps differ with what effect and when folks would want to use them.

you can add them to addclicky combat / downtime / defensive etc
Click to expand...
Ok, I thought so but just wanted to be certain.
 
VahshirEQ said:
Any way to have manual mode not buff for all the plugins?
Click to expand...
Turn byos on if u dont want to buff, or have everyone unload mq2cwtnbuffs.

Its going to buff if manual mode unless ur byos, and this will be for all the plugins. Vyos is u want to handle your own buffs and spellgems
 
Sic said:
Turn byos on if u dont want to buff, or have everyone unload mq2cwtnbuffs.

Its going to buff if manual mode unless ur byos, and this will be for all the plugins. Vyos is u want to handle your own buffs and spellgems
Click to expand...
Thank you, Sic.
 
I am trying to add Janns veil to Mq2bst so he will click it i have this in the file Clicky0=Jann's Veil|Downtime but he refuses to click it any ideas?
 
If you are already using an illusion on you it won't work.
Use it with /bst autoremoveillusion on.
On my rogue, it was cliking it because i was using an illusion already.

You can check in your keyring too which stat illu you have.
 
Montra38 said:
I am trying to add Janns veil to Mq2bst so he will click it i have this in the file Clicky0=Jann's Veil|Downtime but he refuses to click it any ideas?
Click to expand...
you shouldn't add anything to the ini manually. you should add it from in-game by holding the item and then /bst addclicky downtime

I have jann's veil added to all my characters and it works as expected

did you try and add the illusion or the buff to your blocked spells?

do you have any spells that would prevent the veil from trying to fire? like another illusion like Mr. P said? or something that is "better" than the veil that might prevent the veil from landing?

or like mr.p suggested - do you have a messed up stat illusion in your keyring?

I have the veil added to all of my toons, and i use autoremoveillusion so it drops the illusion after i get the buff

1610297268015.png
1610297274942.png
 
Hey Sic, I've poured through the forum but I can't seem to find a reference to this issue...my bst is stuck in a loop where he's trying to mem spells to gem slot 7 but each time he starts combat memorizing neemzaq's endemic (not in combat). I've re-downloaded the files several times and started the plugin fresh with no spells memmed, and each time it hangs up on trying to mem slot 7. Any ideas on what's going on? thanks!
 
Last edited:
boeufmaster said:
Hey Sic, I've poured through the forum but I can't seem to find a reference to this issue...my bst is stuck in a loop where he's trying to mem spells to gem slot 7 but each time he starts combat memorizing neemzaq's endemic (not in combat). I've re-downloaded the files several times and started the plugin fresh with no spells memmed, and each time it hangs up on trying to mem slot 7. Any ideas on what's going on? thanks!
Click to expand...
it only combat memorizes if you have selected to combatsummonpet and you are in combat / have xtargets - and if you have your pet and its buffed it will put your spell gems back to how they should be.

I don't know - you say "each time he starts combat memorizing (not in combat)"

sounds like you need to restart eq
 
Sic said:
it only combat memorizes if you have selected to combatsummonpet and you are in combat / have xtargets - and if you have your pet and its buffed it will put your spell gems back to how they should be.

I don't know - you say "each time he starts combat memorizing (not in combat)"

sounds like you need to restart eq
Click to expand...
hmm interestingly, I restarted to verify I wasn't in combat but it was still happening, then I turned off combatsummonpe and it seems to have fixed it.
 
boeufmaster said:
hmm interestingly, I restarted to verify I wasn't in combat but it was still happening, then I turned off combatsummonpe and it seems to have fixed it.
Click to expand...
it only does it if you have mobs on your xtarget or mq2 thinks you are in combat /shrug

I suspect it is going to buff after combat, but then you pull another mob and get in combat, so then it rememorizes what it wants for in combat and then does that back and forth between pulls - which is what you're asking it to do with combatsummonpet - if you don't have your correct spells loaded after you have your pet up, it is going to put them back
 
Last edited:
I’m very excited to try this as I’m rolling up a beast soon. I use MQ2eskay, MQ2Shaman and MQ2Berseker and they are awesome.
 
I figured out : mq2bstXXXX.ini file have 2 the same set :
[general]
focus paragonendend
focus paragonmana
[paragon]
focus paragonendend
focus paragonmana

and
[general]
paragonend
paragonmana
no work !!!
but its work after I add that to [paragon]

--------------------------
so confuse~~~ please suggest!!!
 
Last edited:
Ysaga said:
I figured out : mq2bstXXXX.ini file have 2 the same set :
[general]
focus paragonendend
focus paragonmana
[paragon]
focus paragonendend
focus paragonmana

so confuse~~~ please suggest!!!
Click to expand...
they (focused and paragon settings) should all be under the paragon section - so yeah that's a problem.

i'll have that fixed for tomorrow.

I'm also going to move UseParagon to the [Paragon] section as well.
 
thanks for quickly reply!!!
and I also have 1 issue for mq2bst
----------IN BATTLE (combat)--------------
my group : sk ,clr bard bst X3
bst use chase mode
happen condition:
1. aggro fews mobs on my aggro window
2. Bst die and get a rez period battle.

My probelm is :BST dont assist current target until current target die.

Currently, I change to mode 0 and use hot key to assist MA then it's work for me
Sic : could you fix it : let BST join battle asap once get a rez???
PS: its inconvenience once doing mission

thanks
 
Ysaga said:
...
1. aggro fews mobs on my aggro window
2. Bst die and get a rez period battle.

My probelm is :BST dont assist current target until current target.

Currently, I change to mode 0 and use hot key to assist MA then it's work for me
Sic : could you fix it : let BST join battle asap once get a rez???
PS: its inconvenience once doing mission

thanks
Click to expand...
yes, if your bst dies and gets a rez, he's going to chill until he's given a new target.

just clear your target with your MA (so it re-gets its target), which will get him back in the fight. this is the same with all the plugins.
 
Has anyone seen where the BST will just sit there while the rest of the group keeps attacking? He will cast a few buffs inbetween mobs and then do nothing. I started today, not sure why normally he attacks and assists the SK with no problem, he wont do anything to the mobs. I have tried the following: /reload, reinstalled plugin, drop group and reassign MA, Pause on/off, Manual/Assist. I can't figure out why its stuck in this mode, also made new pet and wiped buffs to make sure he wasn't stuck. Also noticing he is getting stuck with meming spiritual vehemence slot 7 and then changing back to Neemzaq's Endemic RK.III over and over and over.
 
gibbo889 said:
Has anyone seen where the BST will just sit there while the rest of the group keeps attacking? He will cast a few buffs inbetween mobs and then do nothing. I started today, not sure why normally he attacks and assists the SK with no problem, he wont do anything to the mobs. I have tried the following: /reload, reinstalled plugin, drop group and reassign MA, Pause on/off, Manual/Assist. I can't figure out why its stuck in this mode, also made new pet and wiped buffs to make sure he wasn't stuck
Click to expand...
nope, never seen anything like that.

you sure you didn't get off-mesh somehow?

is it possible you have levitation on and you're on a hill? cwtn has some updates to our library (all the plugins) for a fairly uncommon but possible situation where you're levitating but on a hill - so this might be related to that.

you can /bst useswimfix off and see if that fixes your issue --- its called swimfix because it handles mainly swimming, but the same logic is used if you have levitation to try and get you close to your mob

so I would try one or a combo of the following:

a: remove your levitation
b: turn off swimfix
c: wait till tomorrow's update
 
Sic said:
nope, never seen anything like that.

you sure you didn't get off-mesh somehow?

is it possible you have levitation on and you're on a hill? cwtn has some updates to our library (all the plugins) for a fairly uncommon but possible situation where you're levitating but on a hill - so this might be related
Click to expand...


How do i check if I'm off mesh? The rest of the group (Cleric/Zerk/SK plugins, bard necro kissassit working fine) Im in WW cave pretty flat.
 
gibbo889 said:
How do i check if I'm off mesh? The rest of the group (Cleric/Zerk/SK plugins, bard necro kissassit working fine) Im in WW cave pretty flat.
Click to expand...
you would /nav ui render navigation mesh, and check that you're standing on the mesh. (you can also target yourself and /nav target - if you are on mesh then you will just face a direction and say navigating to your target - if you're not it would give you a red mq2nav error msg)

but I would check the other suggestions i mentioned
 
Sic said:
you would /nav ui render navigation mesh, and check that you're standing on the mesh. (you can also target yourself and /nav target - if you are on mesh then you will just face a direction and say navigating to your target - if you're not it would give you a red mq2nav error msg)

but I would check the other suggestions i mentioned
Click to expand...
I'll wait till tomorrows update and then if no luck try those options. Thank you Sic
 
You must log in or register to reply here.
Plugin - MQ2Bst
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -