• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2BerZerker

Plugin - MQ2BerZerker (1 Viewer) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (48) Reviews (54) History Discussion Terms and conditions
Nothing in the INI is indicating a reason for the behavior you're explaining.
Do /plugin list
and copy it from the console using CTRL+C, and then paste it here please.
 
Nothing I'm seeing in any of the information you've shared so far would cause the behavior you're describing.
You specified that the warrior had the mob on lock and that it wasn't turning at all
The Stickhow is the same that others are using without any complaint
Your plugin list doesn't indicate anything fishy
You claim not to be running a macro at the same time (verification can be as simple as /end)
You said not using mimic me or follow me buttons
Not underwater
etc.

I'm afraid that I don't see where the issue is.
 
just whatever comes up not something I put in myself which has brought up something else I now have MQ2 "speak" showing up in other windows...used to be in its own window...any way to turn that off??
 

Attachments

  • EQ000697.jpg
    EQ000697.jpg
    60.4 KB · Views: 6
metsman4u said:
just whatever comes up not something I put in myself which has brought up something else I now have MQ2 "speak" showing up in other windows...used to be in its own window...any way to turn that off??
Click to expand...
well if you have mq2 chat in non mq2chat window - you probably loaded mq2chat so /plugin mq2chat unload


but is moveto spam what is causing your issue? we don't use moveto to move characters.
 
1640120030749.png

My best guess is you're running a macro based on that above output.
Both Kissassist and RGMercs use /moveto loc
So it certainly appears as though there is in fact a macro running. I would verify you don't have a hotkey sending a command to all of your toons to start a macro. Specifically one that goes to your characters using plugins.
 
only key I use is move to..to get them all together all Ive ever known/done....unless there is another means of gathering the troops. Since setting stick to off the dancing issue is done and unloaded mq2chat not sure how that started to begin...do appreciate the help here
 
metsman4u said:
only key I use is move to..to get them all together all Ive ever known/done....unless there is another means of gathering the troops. Since setting stick to off the dancing issue is done and unloaded mq2chat not sure how that started to begin...do appreciate the help here
Click to expand...
make sure to check out > Getting Started With The CWTN Plugins Sticky < there is a movement and hotkey guide/video that i have there that might be useful for you.

but yeah, if you're issuing movetos you're going to be fighting the mob.

what we're trying to ask you is "is there something that is frequently doing a broadcast of moveto to your whole team which is moving them around when they shouldn't be"
 
is there a new bug on berserker? he just stops using his discs and i cant figure out why, he has plenty of axes but just stops. 2 times it happened i was able to unload and reload zerker to fix it but last 3 times that hasnt even worked. only way to fix it those times was to log him out and back in. He continues using AA skills and attack just not axe throw and volley and such.
 
Last edited:
Randaal said:
is there a new bug on berserker? he just stops using his discs and i cant figure out why, he has plenty of axes but just stops. 2 times it happened i was able to unload and reload zerker to fix it but last 3 times that hasnt even worked. only way to fix it those times was to log him out and back in
Click to expand...
nope, not that either of us are aware of.

without more information to go on my best random guess would be:

more than likely you have either a: a mesh problem, or b: you need to adjust your settings to ensure the mob is within your camp etc.
 
im not sure what im doing wrong then. Before this post i tried the Aten Ha Ra event Zerker was not using discs so i killed event and reloaded all toons, just did event now and he used all his discs. the only thing i did was summon more axes. could certain bags be bugged so it does not recognized the axes in those bags?
 
Randaal said:
im not sure what im doing wrong then. Before this post i tried the Aten Ha Ra event Zerker was not using discs so i killed event and reloaded all toons, just did event now and he used all his discs. the only thing i did was summon more axes. could certain bags be bugged so it does not recognized the axes in those bags?
Click to expand...
no, i don't think so. eq is the one that actually consumes the axes, not us.
 
Been noticing the berzerker has a lot of difficulty with attacking bats. It might have something to do with zaxis, i'm not sure but they run up to the bat and dont really do much. Running next and in multiple zones.
 
turnittotheright said:
Been noticing the berzerker has a lot of difficulty with attacking bats. It might have something to do with zaxis, i'm not sure but they run up to the bat and dont really do much. Running next and in multiple zones.
Click to expand...
probably need to elaborate on that. what does "difficulty with attacking bats" look/feel/act like?

we don't care about zaxis.

my zerkers, rogues etc are mad bat killing machines.

if you need to adjust your stickhow, you can
 
turnittotheright said:
Been noticing the berzerker has a lot of difficulty with attacking bats. It might have something to do with zaxis, i'm not sure but they run up to the bat and dont really do much. Running next and in multiple zones.
Click to expand...
I mean, how far above you are the bats? Are they out of melee range? If so there is nothing we can do about that. You'll need to have your tank manage them till they are at an appropriate height. I usually just backup.
 
could get a ladder, or some moon boots - we are on luclin, you think they'd be more common
 
I'm running into a weird issue with my zerkers during combat. They just stand and do not engage until I tab over then they engage. It doesn't happen every time but just a pain to have to constantly tab etc... If anyone can think of a nice quick fix i would appreciate.

TY
 
Happened to me, you should look at your background FPS
 
Last edited:
When I migrated over to MQ2Next all of my plugins were working. On my "plugin" tab, I only noticed NextShaman, and NextCleric present. There were no NextWar or NextBerz, but all plugins worked. With the update that I ran today MQ2War and MQ2Berz stopped working, and I get the following messages (see below):

Why didnt War/Zerk migrate over, and how do I get them on my Plugins tab for updates again, since they didn't migrate over? I have them both "watched", as far as I know.

Thanks in advance.
 

Attachments

  • RG.png
    RG.png
    6 KB · Views: 1
lordvegga said:
When I migrated over to MQ2Next all of my plugins were working. On my "plugin" tab, I only noticed NextShaman, and NextCleric present. There were no NextWar or NextBerz, but all plugins worked. With the update that I ran today MQ2War and MQ2Berz stopped working, and I get the following messages (see below):

Why didnt War/Zerk migrate over, and how do I get them on my Plugins tab for updates again, since they didn't migrate over? I have them both "watched", as far as I know.

Thanks in advance.
Click to expand...
your next and zerk licese appear to have expired
 
Sic said:
your next and zerk licese appear to have expired
Click to expand...

Subscriptions were updated:
-"Your purchase of MQ2BerZerker has been successfully validated."
-"Your purchase of MQ2War has been successfully validated."

However, they are still not showing up on the Plugin tab, despite being "watched". Also, on both Plugin pages I still see the "Buy a copy now for....." button. Everything was refreshed, and reloaded.

Does this just take time to process? I remember it being immediate in the past.
 
lordvegga said:
Subscriptions were updated:
-"Your purchase of MQ2BerZerker has been successfully validated."
-"Your purchase of MQ2War has been successfully validated."

However, they are still not showing up on the Plugin tab, despite being "watched". Also, on both Plugin pages I still see the "Buy a copy now for....." button. Everything was refreshed, and reloaded.

Does this just take time to process? I remember it being immediate in the past.
Click to expand...


yes they do, there is a stickied thread that explains it.




1641481731704.png
 
I have been noticing an issue with my zerker using the downtime clicky Guise of the Deceiver. He keeps sitting and interrupting the cast time. This seems to have started with MQ2Next/FPS. I have adjusted the background FPS all over the place and it still happens unless I bring him into the foreground. My shammy has no issues with the same downtime clicky and same FPS settings. I also noticed similar behavior on my MQ2Rogue and his leg poison summon. Any suggestions besides turning off FPS background?
 
Chibz said:
I have been noticing an issue with my zerker using the downtime clicky Guise of the Deceiver. He keeps sitting and interrupting the cast time. This seems to have started with MQ2Next/FPS. I have adjusted the background FPS all over the place and it still happens unless I bring him into the foreground. My shammy has no issues with the same downtime clicky and same FPS settings. I also noticed similar behavior on my MQ2Rogue and his leg poison summon. Any suggestions besides turning off FPS background?
Click to expand...
this can definitely happen if you take too long to actually start casting the spell - like in the case of server lag. might consider using chase mode or (i hate this mode) vorpal, which would only sit you back down if your MA sits
 
You must log in or register to reply here.
Plugin - MQ2BerZerker
Next unread thread 🦁

Users who are viewing this thread

  • S
Total: 2 (members: 1, guests: 1)
Back
Top
Cart

Cart

Total -