• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2BerZerker

Plugin - MQ2BerZerker (3 Viewers) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (48) Reviews (54) History Discussion Terms and conditions
durango773 said:
I released to bind. I zoned and put the GUI in manual. I clicked camp fire wheel. I zoned to campfire and put the GUI in assist. I went from around 300k (pre death) to 60k (post death). I checked to make sure all abilities were in ON via GUI and using the /zerk Usexxxxx. They were. I went to manual, did /zerk reload. No change. I camped out to char select. No change. I camped to desktop and back in no change. I checked the general INI and see both char listed, both with same flags:

Checkbox0=1
Checkbox1=0
Checkbox2=1
Checkbox3=1
Checkbox4=1
Checkbox5=0
Checkbox6=0
Checkbox7=0
Checkbox8=0
Checkbox9=0
Checkbox10=0
Checkbox11=0
Checkbox12=0
Checkbox13=1
Checkbox14=1
Checkbox15=1
Checkbox16=1
Checkbox17=1
Checkbox18=1
Checkbox19=1
Checkbox20=1
Checkbox21=1
Checkbox22=0
Checkbox23=0
Checkbox24=0
Checkbox25=0
Checkbox26=0
Checkbox27=0
Checkbox28=0
Checkbox29=0
Checkbox30=0
Checkbox31=0
Checkbox32=0
Checkbox33=0
Checkbox34=0


Checked individual INI's associate and both match:

UseFrenzied=true
UseDisarm=true
UseIntimidate=true
UseBraxi=true
UseBattleLeap=true
UseBloodFury=true
UseRetaliation=true
UseBindingAxe=true

Checked it against the second one, they both match as far as INI's go.

I am watching them side by side now, one is acting normal, the other is spamming frenzy and disarm, along with the occasional Binding Axe.
Click to expand...
this means that you did something you shouldn't have with the zerker window xml

Please watch this video > HERE <

I would then suggest you to unload the plugin, delete your ini files, and then reload the plugin so they can re-create the ini.
 
is it also possible you went silver and your gear is no good? or de-leveled and no longer have access to the gear you are wearing?
 
Sic said:
this means that you did something you shouldn't have with the zerker window xml

Please watch this video > HERE <

I would then suggest you to unload the plugin, delete your ini files, and then reload the plugin so they can re-create the ini.
Click to expand...

Worked thanks, not sure how it ended up going off the rails.
 
Btw - the mq2berzerker.ini and the mq2berzerker_toondude.ini are different.

you should try and avoiding either of them regardless, but especially don't mess with the mq2berzerker.ini as its not really going to help you, and likely only going to cause you grief
 
How do i turn off Warcry or Ancient cry of chaos using MQ2 i need to be avble to do it manually for raids . Thx in advance
 
I have a question, I when I'm PLing it would be nice to keep zerkers not grouped, if too many group up they'll KS and my 4 zerkers are max aa's so I would like to have them /zerk mode assist, but while not grouped with anyone just a cleric merc. can this be done?
 
paigne said:
I have a question, I when I'm PLing it would be nice to keep zerkers not grouped, if too many group up they'll KS and my 4 zerkers are max aa's so I would like to have them /zerk mode assist, but while not grouped with anyone just a cleric merc. can this be done?
Click to expand...
we currently don't have any out of group assisting built in outside of being in a raid with raidmode - you can either just use a hotkey to call them into combat, or use a macro to have them auto assist someone.you can also use tank mode assuming the mobs come into their camp and you have some way of them ending up on xtarget
 
Howdy - I know this may be a amateur question but is it possible to disable zerk epic (vengeful taelosian blood axe) from auto using and blood pact? Just been trying to figure it out with no luck but I'm sure it's just something idiotic I'm doing.
 
Ashrots said:
Howdy - I know this may be a amateur question but is it possible to disable zerk epic (vengeful taelosian blood axe) from auto using and blood pact? Just been trying to figure it out with no luck but I'm sure it's just something idiotic I'm doing.
Click to expand...
there is no way to disable the epic as its part of the routine.

Also no way to disable blood pact
 
The epic is part of your basic DPS routine, it's weaved in with other abilities to keep you in constant melee buffs. The epic has a 1 min duration and a 3 minute downtime. So there really isn't a reason to wait to use it.
 
I run into a random issue where one or many of my toons will get stuck in place and nothing I do will make them move except waiting for approx 15 seconds. Not sure if it’s plug-in or macro related as it only happens on my zerkers (cwtn) bard and bst (rgmerc). I searched forums and didn’t see any threads. My warrior is manually driven and never has issues.
 
frenzied resolve.

Q. Sometimes my berzerker won't chase the MA.
A. Probably have Frenzied Resolve Discipline as their currently active disc, which roots you in place. Sometimes this can be annoying. You can /zerk UseFrenied off, to turn off that ability. But be aware that significantly reduces your overall average DPS.
 
Sic said:
frenzied resolve.

Q. Sometimes my berzerker won't chase the MA.
A. Probably have Frenzied Resolve Discipline as their currently active disc, which roots you in place. Sometimes this can be annoying. You can /zerk UseFrenied off, to turn off that ability. But be aware that significantly reduces your overall average DPS.
Click to expand...
Is there a similar disc or AA that would be affecting they beast lord and bard though?
 
mcbaine2 said:
Is there a similar disc or AA that would be affecting they beast lord and bard though?
Click to expand...
no, but the behavior you are talking about sounds 100% like frenzied resolve, should try with that in mind and see if its actually happening with the bst
 
at times I would like to use mangling disc for my main burn, it seems when a named does pop and I manually push mangling it drops it and auto goes to brutal disc.. What can I do to use mangling until it runs out?
 
The zerker has predefined burn routines. Disconcerting Discipline uses the timer Mangling Discipline is on. I've explained the math behind the reasoning for this in past posts, but due to the short duration and long reuse timer on Mangling and the long duration and short reuse timer on Disconcerting, it's selected instead of Mangling.

There is no way to choose mangling over brutal.

If you want to burn manually, you'd need to turn off the burn routines.

/ber BurnAllNamed off
/ber Burncount 15
/ber burnalways off
 
My cleric with mq2cleric is going nuts trying to heal my zerker running mq2berzerker due to ritual scarification open wound. Can I turn it off, or is there a better solution?
 
Last edited:
poopyfarts said:
My cleric with mq2cleric is going nuts trying to heal my zerker running mq2berzerker due to ritual scarification open wound. Can I turn it off, or is there a better solution?
Click to expand...
you should adjust your nonma heal value, on your cleric, to be lower than your health value with your health limiter

once you get lvl/aa/abilities that value will end up being 89% health

open wound maxes at 117k hp or 89% whichever is lower

ritual scarification maxes at 326k or 89% whichever is lower
 
Last edited:
is there a way to set this up to assist when not in the group? I am looking to rotate my group around and would like to put my zerker as supplemntial dps outside the group
 
Is there anyway we can get a mode or maybe a toggle for when my zerkers are waiting in camp and get jumped by trash mob they auto attack it and kill it instead of waiting for my tank to return and aggro it. watched my group die many times because they would just let themselves get beat on. I have tried using tank mode but they dont kill the mobs they wait for my MT/MA to target the mob and attack it still.
 
How long are your pulls?!

You could theoretically setup a mq2react to toggle modes and group roles for who is MA.... But I'm pretty sure plugins need to restart for group role changes to properly update, at least I know if roles aren't set on plugin start/mode change they get stuck sort of
 
Rooster said:
How long are your pulls?!

You could theoretically setup a mq2react to toggle modes and group roles for who is MA.... But I'm pretty sure plugins need to restart for group role changes to properly update, at least I know if roles aren't set on plugin start/mode change they get stuck sort of
Click to expand...
they do not need to restart to change roles. and they don't get stuck
 
Depend which lvl you are and if you have the spell or not. If you are 106+ and have both spell it will use dissident
 
I could be overlooking something whether its in the plugin or ingame. Is there a way to turn off ritual scarification somehow so when I'm running around on manual doing other things I don't bleed myself to death rofl. Or just remember to turn plugin off for time being?
 
Hambam said:
I could be overlooking something whether its in the plugin or ingame. Is there a way to turn off ritual scarification somehow so when I'm running around on manual doing other things I don't bleed myself to death rofl. Or just remember to turn plugin off for time being?
Click to expand...
there is a turn off bloodfury (which is used if you don't have one of the limiter spells - but no, you can't turn off ritual scarification/open wound

Q. What is the deal with limited health?
A. Zerkers have a bunch of abilities that require them to be injured to use.
once you get lvl/aa/abilities that value will end up being 89% health
open wound maxes at 117k hp or 89% whichever is lower
ritual scarification maxes at 326k or 89% whichever is lower
 
reason i ask is i have dissadent on one not dicho it does not use dissadent at all wich means i think the base is dicho it just shows as dissadent
 
killerclown said:
reason i ask is i have dissadent on one not dicho it does not use dissadent at all wich means i think the base is dicho it just shows as dissadent
Click to expand...
Did you check you actually have it?

Q. Why does it not use Dissident?
A. EQ Has an issue where it doesn't give you your rank 1, even if you have Dissident Rage - If you have Tier 1 of Dissident ensure you actually have the "Dissident Rage 1" in your spell book - if you do not, go to Virtuous Dusk in Stratos and say "reminder" to "update" your rank 1 ability
 
What to do so that I don't have to /reloadui each time I want to see the UI of a CTWN plugin?
Happens on all of them that I use. Cleric, shadowknight, rogue, zerker, monk and war.
Do I need to move some UI files or something?
 
Wolfborn said:
What to do so that I don't have to /reloadui each time I want to see the UI of a CTWN plugin?
Happens on all of them that I use. Cleric, shadowknight, rogue, zerker, monk and war.
Do I need to move some UI files or something?
Click to expand...
first give yourself a watch to this CWTN UI

then - if you closed out the cwtn window you just do a /shd show or relevant class shortname.

the only time you need to reloadui is if you loaded into the game without the plugin loaded, and then loaded it once you area already in game. if the xml for the ui file wasn't already loaded you would need to do the /reloadui
 
I'm pretty new at this , at 86 my zerkers started to do something that instantly knocks them to 20% and get low hp agro and die fast.

Is there somethin in the options I can turn off to prevent this?
 
isotopemodeller said:
I'm pretty new at this , at 86 my zerkers started to do something that instantly knocks them to 20% and get low hp agro and die fast.

Is there somethin in the options I can turn off to prevent this?
Click to expand...
they have abilities that require them to not be full health.

from the FAQ

Q. What is the deal with limited health?
A. Zerkers have a bunch of abilities that require them to be injured to use.
once you get lvl/aa/abilities that value will end up being 89% health
open wound maxes at 117k hp or 89% whichever is lower
ritual scarification maxes at 326k or 89% whichever is lower
 
You must log in or register to reply here.
Plugin - MQ2BerZerker
Next unread thread 🦁

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)
Back
Top
Cart

Cart

Total -