• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Wizard

Plugin - MQ2Wizard 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (31) Reviews (7) History Discussion Terms and conditions
Sic said:
You running 54 wizards? Should pause a couple and pause them to do wizard stuff when you need them to. :p

I understand the ask, and the nuances of the ask.
Click to expand...
I run 5 wizards on raids, and if i pause them it doesnt matter cause their spells arent up.
 
Myysterio said:
I run 5 wizards on raids, and if i pause them it doesnt matter cause their spells arent up.
Click to expand...
...

You definitely missed what I was saying.

Not gonna do the ol back and forth tho.

Don't plan on doing that at this time.
 
Running wifes wizzy, noticing Serene Harvest spell isn't firing (Listed as Harvest spell group) at HarvestMana 80 (it IS using AA harvest on cooldown as mana stays below HarvestMana%)

Current info Spell&Discs - 82 Serene Harvest RK.III
HarvestMana ( 80 ) - dosnt fire if set highter, at , or lower %
 
Cinnwin said:
Running wifes wizzy, noticing Serene Harvest spell isn't firing (Listed as Harvest spell group) at HarvestMana 80 (it IS using AA harvest on cooldown as mana stays below HarvestMana%)

Current info Spell&Discs - 82 Serene Harvest RK.III
HarvestMana ( 80 ) - dosnt fire if set highter, at , or lower %
Click to expand...
sounds like you have UseGambit turned on. you should turn that off if you want to use harvest spell line instead of gambit. You dont get gambit line until 99, so if it is on, you're only going to use that AA at the designated AA
 
Wrong forum
Hi, I've gone through the forums and tried some of the suggested fixes and workarounds. I'm not very tech-savvy, so I may not fully understand what I'm looking for. Apologies if this has already been addressed in other threads.

That said, my current 6-box setup includes: Warrior, Cleric, Enchanter, Rogue, and two Wizards, all running CWTN plugins. Everything is working fine except for the second Wizard, which is not responding attacking. Works fine for navigation just not assisting the MA, which has been set up in the group options. I am getting the following error:

I'm assuming there is some kind of conflict? I was running three monks with cwtn and had no issues at all. When I try /plugin mq2afnuke load ans the /nuke commands im not getting any menu options. What am I missing and how do I fix it?

Thanks all.
 
we unload mq2afnuke as it conflicts. (and we say we're unloading it due to conflicts when we unload it).

mq2wizard does not require mq2afnuke at all.

also, please don't post your toon names, and please post in the correct location - mq2wizard has a discussion thread.
 
dude.

@Noiseman26 stop making new posts.

please read the response you've been given.

mq2wizard posts should be in the mq2wizard thread - which is why they've been merged here (and you notified).

stop posting images of your toon names - like REALLY stop.

cwtn plugins (including mq2wizard) unload mq2afnuke.

mq2afnuke is not required for any of the cwtn plugins and DIRECTLY conflicts, which is why we unload it AND we notify you that we unload it and why.
 
Like I mentioned, I'm not super great with this stuff. I thought I did something wrong when I posted which is why I posted it again. My apologies. I didn't load mq2afnuke I just posted what error I am seeing in the mq2 window. When I try to remove mq2afnuke says no plugin found. I'm just trying to get the second wizard to work.
 
Noiseman26 said:
Like I mentioned, I'm not super great with this stuff. I thought I did something wrong when I posted which is why I posted it again. My apologies. I didn't load mq2afnuke I just posted what error I am seeing in the mq2 window. When I try to remove mq2afnuke says no plugin found. I'm just trying to get the second wizard to work.
Click to expand...
the image you posted showed you trying to use mq2afnuke commands like /nuke

mq2wizard uses mq2wizard commands which all start with /wiz

/wiz mode 2 with a group main assist assigned in your eq window is gonna make this wizard chase that group main assist, and assist it at its assistat health value (default of 98)
 
Last edited:
Hey there! I've been using CWTN for almost two years now, and I think at one point I owned all the plugins. This is actually the first time I’ve come across an issue I couldn’t solve on my own. The screenshot I shared is what MQ2 was displaying in the window, and I was only getting the error message on one of my wizard accounts. The one not working seems to be the problem, which is why I posted the screenshot—I wasn’t sure why that would appear in the MQ2 window. Sorry if I wasn’t clear before!

Just to give you an update, my wizards are now at levels 79 and 72. The 72 wizard is working as intended, but the 79 wizard isn’t casting or memming any spell sets. It’s still assisting with melee attacks since it’s set to assist mode, and the casting boxes are checked. I was thinking about leveling them closer together, hoping it might fix the casting issue.

I have also opened both ini files and made sure they match, which they do. So I'll keep going but I'm at the end of all they things I have found on the forms to try to fix it. I'm sure its something not set up on my side just not sure what else to look for.
 
if you load up only that second wizard and start mq2wiz, what happens? does he do the expected things or still broken?
 
Noiseman26 said:
Hey there! I've been using CWTN for almost two years now, and I think at one point I owned all the plugins. This is actually the first time I’ve come across an issue I couldn’t solve on my own. The screenshot I shared is what MQ2 was displaying in the window, and I was only getting the error message on one of my wizard accounts. The one not working seems to be the problem, which is why I posted the screenshot—I wasn’t sure why that would appear in the MQ2 window. Sorry if I wasn’t clear before!

Just to give you an update, my wizards are now at levels 79 and 72. The 72 wizard is working as intended, but the 79 wizard isn’t casting or memming any spell sets. It’s still assisting with melee attacks since it’s set to assist mode, and the casting boxes are checked. I was thinking about leveling them closer together, hoping it might fix the casting issue.

I have also opened both ini files and made sure they match, which they do. So I'll keep going but I'm at the end of all they things I have found on the forms to try to fix it. I'm sure its something not set up on my side just not sure what else to look for.
Click to expand...
Is the plugin loaded on both characters? /plugin mq2wizard
The NukeManaMin is defaulted at 60 iirc. Make sure you have mana to cast things.
It's hard to say what is causing your issue. But there shouldn't be a situation where one wizard is working fine and the other refuses to do anything assuming that all their conditions are met for engaging in combat.
Need to make sure you have mana for one.
The wizard doesn't memorize things in combat. Make sure you're out of combat so that they can memorize things.
If you clear your entire spellbar, and you're not in combat, does the wizard memorize anything at all?
 
Thanks for the help, everyone! I had plenty of mana, the same spells, and BYOS wasn’t locked—everything was set up the same. But once my lower wizard hit 75, they both started working perfectly. Pretty weird, never seen that before. I ran three monks for almost a year with no issues. You guys are the best, and that’s why I’ve stuck with you, even after dealing with suspensions and a couple bannings. CWTN plugins are what keep me connected to EQ after 25 years of playing. Keep up the awesome work!

Sic, sorry again for annoying you this morning. I promise it was an honest mistake. /Cheers, my dudes!
ChatWithThisName said:
Is the plugin loaded on both characters? /plugin mq2wizard
The NukeManaMin is defaulted at 60 iirc. Make sure you have mana to cast things.
It's hard to say what is causing your issue. But there shouldn't be a situation where one wizard is working fine and the other refuses to do anything assuming that all their conditions are met for engaging in combat.
Need to make sure you have mana for one.
The wizard doesn't memorize things in combat. Make sure you're out of combat so that they can memorize things.
If you clear your entire spellbar, and you're not in combat, does the wizard memorize anything at all?
Click to expand...
 
Noiseman26 said:
Thanks for the help, everyone! I had plenty of mana, the same spells, and BYOS wasn’t locked—everything was set up the same. But once my lower wizard hit 75, they both started working perfectly. Pretty weird, never seen that before. I ran three monks for almost a year with no issues. You guys are the best, and that’s why I’ve stuck with you, even after dealing with suspensions and a couple bannings. CWTN plugins are what keep me connected to EQ after 25 years of playing. Keep up the awesome work!

Sic, sorry again for annoying you this morning. I promise it was an honest mistake. /Cheers, my dudes!
Click to expand...
Glad it's all sorted. Wish we could have determined the cause.
 
Not sure if this is known yet or not, but I dont think mq2wiz is casting chromospheric vortex. Ive done all 3 missions and killed half a dozen named mobs and it hasnt cast it once.

also noticed the spells & discs has idyllic gambit 115 showing when anodyne gambit is 120 and contemplative gambit is 125. it's def casting anodyne gambit, havent tried contemplative yet.

edit: confirmed not using contemplative gambit.
 
I searched for mana burn issues in this thread, but did not see what I have been encountering. I run 2 wizards in a group, noticed that if a named spawns one wizzy will fire the mana burn like it should, but then if another named spawns close after the second wizzy will not fire the mana burn at all? This is happening when the first wizard who previously used mana burn still has it on a cooldown.
 
TVCChiver said:
I searched for mana burn issues in this thread, but did not see what I have been encountering. I run 2 wizards in a group, noticed that if a named spawns one wizzy will fire the mana burn like it should, but then if another named spawns close after the second wizzy will not fire the mana burn at all? This is happening when the first wizard who previously used mana burn still has it on a cooldown.
Click to expand...
Thats a eq limit. Either 200 mana costing spells have to hit (mb buffs others spells) or 120 seconds (2 min) have to pass.
 
durango773 said:
Thats a eq limit. Either 200 mana costing spells have to hit (mb buffs others spells) or 120 seconds (2 min) have to pass.
Click to expand...
Maybe I didn't explain it well. So we will pull a named and wizard 1 will use mana burn like they should. We will kill the mob and pull some others. Another named spawns and we pull it (Wizard 1 still has mana burn on cooldown), and wizard 2 has mana burn up but does not fire it.
 
TVCChiver said:
:shrug: Maybe I didn't explain it well. So we will pull a named and wizard 1 will use mana burn like they should. We will kill the mob and pull some others. Another named spawns and we pull it (Wizard 1 still has mana burn on cooldown), and wizard 2 has mana burn up but does not fire it.
Click to expand...
I havent seen where the debuff applies, would be just like dbg's to cast it on the group as a blocker then the mob.. or could be a script thing, thats chat and sic, ir dumb.
 
durango773 said:
I havent seen where the debuff applies, would be just like dbg's to cast it on the group as a blocker then the mob.. or could be a script thing, thats chat and sic, ir dumb.
Click to expand...
Yea I've definitely see the debuff apply and that portion makes sense why the 2nd wizard can't use mana burn on the same mob. But different mobs confuses me on why it wont.
 
TVCChiver said:
Yea I've definitely see the debuff apply and that portion makes sense why the 2nd wizard can't use mana burn on the same mob. But different mobs confuses me on why it wont.
Click to expand...
Wizard 2 doesn't know or give a shit about wizard 1
 
Sic said:
Wizard 2 doesn't know or give a shit about wizard 1
Click to expand...
So if Wizard 2 tried to cast mana burn on a mob that Wizard 1 already cast it on, and Wizard 2 see's the debuff on the mob already and doesn't fire. Why won't Wizard 2 fire mana burn on a new named spawn when Wizard 1 still has mana burn on cooldown?
 
TVCChiver said:
So if Wizard 2 tried to cast mana burn on a mob that Wizard 1 already cast it on, and Wizard 2 see's the debuff on the mob already and doesn't fire. Why won't Wizard 2 fire mana burn on a new named spawn when Wizard 1 still has mana burn on cooldown?
Click to expand...
i mean i didn't stutter since it is written you can re-read it :p

wizard 1 doesn't know wizard 2 exists and vice versa.

all it sees is the mob

if the mob has a debuff, we wouldn't cast it.

new mob means it isn't same as old mob which means we don't care.

it almost certainly means it isn't meeting something else based on your settings.

if you have useglyph turned on, we will pair manaburn with glyph so I'm betting you either:
- don't have manaburn turned on (it is off by default)
or
- have useglyph on, but don't have a glyph when second named comes.
 
Sic said:
i mean i didn't stutter since it is written you can re-read it :p

wizard 1 doesn't know wizard 2 exists and vice versa.

all it sees is the mob

if the mob has a debuff, we wouldn't cast it.

new mob means it isn't same as old mob which means we don't care.

it almost certainly means it isn't meeting something else based on your settings.

if you have useglyph turned on, we will pair manaburn with glyph so I'm betting you either:
- don't have manaburn turned on (it is off by default)
or
- have useglyph on, but don't have a glyph when second named comes.
Click to expand...
Thank you for the help Sic, it is definitely the issue with use glyph on.
 
Issue: Theater of Eternity Portal / Gate spells show in portal list but do not memorize and activate like other spells. I can memorize it manually and cast without issue.
 
How do you assign a pull ability? i would like to use Atols or a nuke.
 
Last edited:
Draklin said:
How do you assign a pull ability? i would like to use Atols or a nuke. Im also not seeing contemplative gambit being fired off even though its highlighted too.
Click to expand...
You can't/don't set a pull ability.

We do use gambit if you have it turned on, it isn't just willy nilly tho.
 
Been AA’ing up my wizzy can’t wait to try some plugins I’ve been looking at. Slowly figuring this all out!
 
You must log in or register to reply here.
Plugin - MQ2Wizard
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -