• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Ranger

Plugin - MQ2Ranger (1 Viewer) 3.1.52471.11

Is there a way to use the Isopexine Swiftbow clicky when using the UseEntropy option instead of the spell? ( https://everquest.allakhazam.com/db/item.html?item=88254 )
Not really any reason to do that. Entropy of Nature is an AA that doesn't use any mana and has a really small recast time of 6 seconds. It also has a much shorter cast time than 3 seconds. By the time you fired the clicky the reuse timer on the AA would almost be ready again. Just doesn't seem like a good time investment for a special item use case.
 
Ahhh thanks I didnt know it was an AA as we are not yet on that expansion on on some TLP server.
 
Spell come out in the Buried Sea and the Bow come out in underfoot. Wich is a few exp before the AA but its fine can always make a hotkey to useitem the bow for a few months :)
 
This is completely wrong on so many levels.
95 percent or more of eq players, I think more likely than not, are very poor at clicking buttons and keys in a certain order to give them high dps, even so the level that these plugins play at is actually higher than most good eq players. If one would examine the apm of a high level player vs red guides plugins my guess is the apm would be insanely higher than even the best players. I consider myself a high level sham player, but regularly get rekt on shei when me and my friends run it by a group geared plugin sham on both heal and dps lol. This is something that ultimately led me back to redguides.
 
Spell come out in the Buried Sea and the Bow come out in underfoot. Wich is a few exp before the AA but its fine can always make a hotkey to useitem the bow for a few months :)
Ranger aa entrap isn't after uf I have it am in uf now
 
Hi Sic,

Any chance you were able to get a fix for this? shout coombo on pets not in same group as ranger continues to just spam buff pet. thanks in advance
we don't check pets on xtarget, i did this back in october when i fixed the other stuff for shoutcombo
 
we don't check pets on xtarget, i did this back in october when i fixed the other stuff for shoutcombo
its not checking the pets on xtarget, its checking the owners who is on xtarget thier pets. i knew this was fixed but for some reason its doing it again, so wht i have to do is just have the buff removed from its owner

ill monitor it aqagain, naybe its something else. but i just catch him constantly targeting my shamans pet after my shamans pet dies and gets resummoned
 
its not checking the pets on xtarget, its checking the owners who is on xtarget thier pets. i knew this was fixed but for some reason its doing it again, so wht i have to do is just have the buff removed from its owner

ill monitor it aqagain, naybe its something else. but i just catch him constantly targeting my shamans pet after my shamans pet dies and gets resummoned
yes, that is how we check pets, putting a pet directly on xtarget is pretty unusual. I'd recommend not doing that.
 
yes, that is how we check pets, putting a pet directly on xtarget is pretty unusual. I'd recommend not doing that.
yes your correct, thats not what im doing, its the owners pets that is on xtarget. ill do some testing and show on a screen shot. maybe its doing something that im not realizing. thx again sic
 
yes your correct, thats not what im doing, its the owners pets that is on xtarget. ill do some testing and show on a screen shot. maybe its doing something that im not realizing. thx again sic
hi sic, here is the spam

1703373829066.png

continues to cast this on the pet which is not in the same group as the ranger.

thanks again
 
Sorry if this has already been brought up but when I have my ranger on Pull Assist, he'll initiate the pull with the bow but afterwards will then run up to the mob to do whatever after tagging it from range and then start to run back to the camp.
Is there anyway to prevent this?
 
Sorry if this has already been brought up but when I have my ranger on Pull Assist, he'll initiate the pull with the bow but afterwards will then run up to the mob to do whatever after tagging it from range and then start to run back to the camp.
Is there anyway to prevent this?
it is likely due to receiving a message that it can no longer see the target after the mob has been hit, but before the mob populates on xtarget.

no, no way to prevent that at this time.
 
Why will this plugin not do ranged attacks. I have the box checked but toon will only do meele.
 
Hello Team CWTN Ranger, I have a small issue I need advice on when you get a chance.

Issue: Ranger chain casts Epic effect "Falcon Strike" during combat. The buff is blocked by "Engulfed Effect" and resets the cooldown on the epic "Aurora, the Heartwood Blade", so no cooldown making it immediately available for re-cast. There is a cast time associated with the epic, so repeated attempts to cast epic is reducing DPS.

Expected behavior: Check if "Engulfed Effect" is already up, before using Falcon Strike.

Details: "Engulfed Effect" is a short term buff procced by the "Engulfed by the Hunt" buff, which is part of the "Wildstalker's Unity" Azia and Beza AA package. It has ranked upgrades II and III and lasts 60 seconds.

I see that the Epic and the BP are in the showClickies list under "Special". Is this a category managed by the plugin? I have tried to removeClicky for troubleshooting, but couldn't seem to get it removed.

Thanks for the great plugin. Happy New Year.
 
Hello Team CWTN Ranger, I have a small issue I need advice on when you get a chance.

Issue: Ranger chain casts Epic effect "Falcon Strike" during combat. The buff is blocked by "Engulfed Effect" and resets the cooldown on the epic "Aurora, the Heartwood Blade", so no cooldown making it immediately available for re-cast. There is a cast time associated with the epic, so repeated attempts to cast epic is reducing DPS.

Expected behavior: Check if "Engulfed Effect" is already up, before using Falcon Strike.

Details: "Engulfed Effect" is a short term buff procced by the "Engulfed by the Hunt" buff, which is part of the "Wildstalker's Unity" Azia and Beza AA package. It has ranked upgrades II and III and lasts 60 seconds.

I see that the Epic and the BP are in the showClickies list under "Special". Is this a category managed by the plugin? I have tried to removeClicky for troubleshooting, but couldn't seem to get it removed.

Thanks for the great plugin. Happy New Year.
thanks - we were already checking for steeled effect, but need some more to ensure we're checking against the buff from whatever our ProcKillShot is.

edit: appreciate the write up - yeah it is this, i have the fix, will be a day or two until rebuild more than likely
 
Last edited:
Level 125 ranger on Live.
Engulfed Effect II (ID 66539) from Engulfed by the Hunt Rk. II blocks Falcon Strike (ID 6267) from 2.0.

However, the plugin tried to spam click the 2.0 until it fades. I understand this normally falls under the the whole "EQ doesn't always properly report stacking problems" but I wanted to call it out since its the ranger epic and ranger self buff. I'd really hate to block one or the other.

Edit: Crap - just realized someone already posted about this, and Sic mentioned he has a fix. I can delete or leave here so Sic can smack me for not catching the issue was already addressed. I'll take my beating.
 
Level 125 ranger on Live.
Engulfed Effect II (ID 66539) from Engulfed by the Hunt Rk. II blocks Falcon Strike (ID 6267) from 2.0.

However, the plugin tried to spam click the 2.0 until it fades. I understand this normally falls under the the whole "EQ doesn't always properly report stacking problems" but I wanted to call it out since its the ranger epic and ranger self buff. I'd really hate to block one or the other.

Edit: Crap - just realized someone already posted about this, and Sic mentioned he has a fix. I can delete or leave here so Sic can smack me for not catching the issue was already addressed. I'll take my beating.
all good
 
i haven't found this information anywhere so i'll just ask it here and delete my comment once i get an answer. How do i set it so my Windows stay how i set them.. Everytime i log in with certain character i have to move the CWTN window to where i want it, or resize it. I know if i do /rng burnalways on for exmaple that'll update the ini and it'll remember that settings. But for having windows located where i want them vs having to move them everytime? It's weird because certain characters its remembered my window locations and size, while others always load in the default position in the top left corner of the screen and are small. Thanks!
 
i haven't found this information anywhere so i'll just ask it here and delete my comment once i get an answer. How do i set it so my Windows stay how i set them.. Everytime i log in with certain character i have to move the CWTN window to where i want it, or resize it. I know if i do /rng burnalways on for exmaple that'll update the ini and it'll remember that settings. But for having windows located where i want them vs having to move them everytime? It's weird because certain characters its remembered my window locations and size, while others always load in the default position in the top left corner of the screen and are small. Thanks!
macroquest saves imgui window positions in macroquest_overlay.ini

if you're using isboxer and tiling - you have an issue that there is no mq/cwtn/sic soution for
 
macroquest saves imgui window positions in macroquest_overlay.ini

if you're using isboxer and tiling - you have an issue that there is no mq/cwtn/sic soution for
ok strange i'm not using isoboxer or tiling.. not sure what they are.. just Macroquest + the macro's for my toons i bought here.. and the level 85 character templates for mischief. Like i said some window positions are saved and some aren't. not sure what i did on those characters where it remembers my window positions, while other accounts dont
 
ok strange i'm not using isoboxer or tiling.. not sure what they are.. just Macroquest + the macro's for my toons i bought here.. and the level 85 character templates for mischief. Like i said some window positions are saved and some aren't. not sure what i did on those characters where it remembers my window positions, while other accounts dont
not sure then, the overlay stuff is handled by macroquest_overlay.ini file - I guess it is possible you might get file locking if you're constantly autoscanning your mq folder with antivirus or file syncing - but it isn't something that mq2ranger is doing unfortunately
 
not sure then, the overlay stuff is handled by macroquest_overlay.ini file - I guess it is possible you might get file locking if you're constantly autoscanning your mq folder with antivirus or file syncing - but it isn't something that mq2ranger is doing unfortunately
ok thanks! i'll try to close off my window where i want it then type /rng show to reload it, and see if when i reload the character it remains in the positions i want.
 
I was considering making a LEM for it but is it possible to add something for when you're in tight quarters and trying to range? Perhaps, if your backing up to get > 35 and fail to do so within 5 seconds, UseRange 0 and StickHow to something melee-oriented until that target dies before reverting to range settings?
 
I was considering making a LEM for it but is it possible to add something for when you're in tight quarters and trying to range? Perhaps, if your backing up to get > 35 and fail to do so within 5 seconds, UseRange 0 and StickHow to something melee-oriented until that target dies before reverting to range settings?
No
 
Plugin - MQ2Ranger

Users who are viewing this thread

Back
Top
Cart