• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Necro

Plugin - MQ2Necro 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (74) Reviews (16) History Discussion Terms and conditions
ChatWithThisName said:
While I will say that these are not designed to solo really, you should use a pulling mode. PullerTank or HunterTank should be the thing you're looking for.
You also need to check your pulling tab and ensure you zhigh/low (or just /nec zradius #) and radius are setup correctly, it should pull with Scent of Thule AA assuming you haven't disabled the pull ability and you have the AA.
Click to expand...
Thank you!
 
Pharidan said:
I'm clearly an idiot here. I want to solo using this, but no matter what mode I'm in nor what I set my role as, this never initiates the pull/fight cycle. What am I missing please?
Click to expand...
ChatWithThisName said:
While I will say that these are not designed to solo really, you should use a pulling mode. PullerTank or HunterTank should be the thing you're looking for.
You also need to check your pulling tab and ensure you zhigh/low (or just /nec zradius #) and radius are setup correctly, it should pull with Scent of Thule AA assuming you haven't disabled the pull ability and you have the AA.
Click to expand...
pop a merc (or get a box) so you can assign yourself group main tank / group main assist

Pharidan said:
If I send my pet in, I won't autocast anything but spam Companion's Aegis.
Click to expand...
mob needs to be within your campradius - and if you don't have an ma, you'll get better results turning on usemelee
 
Wrong forum
I cant for the life of me figure out how to get my necro to stop standing when im trying to get in the spellbook he just stands up! please help
 
You didn't state what automation you are using but pause it maybe? Might be something in the mq box telling you why the toon is standing?
 
mikemike said:
I cant for the life of me figure out how to get my necro to stop standing when im trying to get in the spellbook he just stands up! please help
Click to expand...
either pause mq2necro, or be byos if you don't want us to try and get you out of your spellbook
 
I'd like to make a request for the MQ2Necro in regards to swarm pets. They do a ton of DPS and I absolutely love them - but every time my bard, or chanter, or even the necro himself mez's a target the pets drop off and don't seem to attack again.
Can we make a regular combat check for having swarm pets attack please?
 
Seariz said:
I'd like to make a request for the MQ2Necro in regards to swarm pets. They do a ton of DPS and I absolutely love them - but every time my bard, or chanter, or even the necro himself mez's a target the pets drop off and don't seem to attack again.
Can we make a regular combat check for having swarm pets attack please?
Click to expand...
everytime we engage a mob and/or send in pets we resend them. (and we actually delay and send swarm pets twice because the command might be before eq registers they can be attacked by the swarms - but yep we already handle this.
 
Sic said:
everytime we engage a mob and/or send in pets we resend them. (and we actually delay and send swarm pets twice because the command might be before eq registers they can be attacked by the swarms - but yep we already handle this.
Click to expand...
Yeah I figured that part - because the pets are usually on the mob, I was just wondering if there could be a "mez broke" event that makes the pets resend again within the plugin (same goes for Enchanter too with his big AA pet, when the mob gets mezzed by Chaotic we get enc twincast chance but all swarm pets just stop for the fight...and with normal fights being about 15-20 seconds long, the routine almost never comes up again to send in the pets).
If not thats cool, I can always try and go oldschool and do a custom MQ2event lol.
 
Is there a way we could get a Summon Corpse feature on the necro, to check if any groupmates are dead but out of range and just summon them back to group so cleric can rez (or so necro can rez or w/e)?
 
Seariz said:
Must have skimmed it since I thought all features had buttons on the UI - my apologies. So since the character has to be in the zone, is there also a way (this time I checked FAQ on Paladin before asking) - for the tank to auto campfire back when he's dead so the necro can do that?
Click to expand...
no, thats also in the FAQ (also notes you can have a lem or react/event script do it solo).
 
Seariz said:
Must have skimmed it since I thought all features had buttons on the UI - my apologies. So since the character has to be in the zone, is there also a way (this time I checked FAQ on Paladin before asking) - for the tank to auto campfire back when he's dead so the necro can do that?
Click to expand...
No, we intentionally don't click back
 
Sic said:
No, we intentionally don't click back
Click to expand...
Ok no worries - and thank you. Also CWTN and Durango773 both mentioned FAQ items that I couldn't find in any FAQ area.... Can you point me to whatever the hell I'm obviously missing please? I thought all FAQ sections were the tabs at the top near where it says Discussion.
 
Seariz said:
Ok no worries - and thank you. Also CWTN and Durango773 both mentioned FAQ items that I couldn't find in any FAQ area.... Can you point me to whatever the hell I'm obviously missing please? I thought all FAQ sections were the tabs at the top near where it says Discussion.
Click to expand...
Each resource has it's own FAQ. The FAQ is found at the top of each resource if it has an FAQ. Usually when answering questions I look at my own FAQ to see if it's listed then just copy paste if it is. We try to put all common questions in the FAQ. Screenshot_20240306-173641.png

I'm on my phone. But same location. F.A.Q.
 
Trying to figure out what I don't have set up correctly or that I'm doing wrong. I compared my settings with someone else who uses this plugin also his number 2nd spell gem slot is Pyre of Va Xakra (every other spell matches) and no matter what I do other than setting BYOS it wont load that spell. It instead loads Pyre of Klraggek. I have both spells as RK.III Anyone by chance have any input to help me figure out where I done screwed up? Also focus AA for Pyre of Jorobb is maxed out.
Screenshot 2024-03-09 022704.png
Screenshot 2024-03-09 022251.png
 
ccorpse said:
Trying to figure out what I don't have set up correctly or that I'm doing wrong. I compared my settings with someone else who uses this plugin also his number 2nd spell gem slot is Pyre of Va Xakra (every other spell matches) and no matter what I do other than setting BYOS it wont load that spell. It instead loads Pyre of Klraggek. I have both spells as RK.III Anyone by chance have any input to help me figure out where I done screwed up? Also focus AA for Pyre of Jorobb is maxed out.
View attachment 58619
View attachment 58618
Click to expand...


Q. I seem to be using a different PyreShort than is available to me?
A. We try and match the PyreShort focus from your Robe. We keep track of the 2 best pyre's you have available, and use whichever one of those matches your robe focus.

www.redguides.com

Combat Assist - MQ2Necro - Extra info

www.redguides.com www.redguides.com


Are we running into this cause you need a new robe?
 
Is there a possibility of you guys making an addition/making a change to the RaidSwapDots so we can use it without tying it to Raidmode on? I really like the function, but I like controlling my own targets and not relying on random raid assist.
 
EQFoli said:
Is there a possibility of you guys making an addition/making a change to the RaidSwapDots so we can use it without tying it to Raidmode on? I really like the function, but I like controlling my own targets and not relying on random raid assist.
Click to expand...
pretty unlikely , eq allows 3 raid assists and the plugins allow you to set which one you're following - you can't have one of them for you?
 
EQFoli said:
So if I choose "Unassigned", I can still do my own targeting?

Or do you mean that I myself gets added to assist?
Click to expand...
have the raid leader make whatever toon you want to follow the raid assist - you're in raidmode, it is going to try and assist, same not in raidmode, you're going to be trying to assist your group raid assist
 
Allright, thanks. I'll stick to BYOS then to load as many dots as possible; I want to make sure I'm as anonymous as possible, so asking for a raidassist probably isn't something I'm gonna do :)
 
so i am using this for 5 necros.... level 100 each with 1 level 116 necro and i cant seem to get the stupid necros to summon a pet in or out of combat. im not using byos and i also have combat summon pet on and i have 1000 bone chips.

1711595348069.png 1711595637735.png
 

Attachments

knarf1978 said:
so i am using this for 5 necros.... level 100 each with 1 level 116 necro and i cant seem to get the stupid necros to summon a pet in or out of combat. im not using byos and i also have combat summon pet on and i have 1000 bone chips.
Click to expand...
click off UseCharm
 
knarf1978 said:
well i was coming back to delete my post because i uninstalled mq2necro and put it back and its working now... wish i would have seen this first so i didnt have to shut eq down.
Click to expand...
deleting posts is almost always the wrong answer, because people have already spent their time looking, thinking, responding

but yep, if you have usecharm on, you won't summon a pet.
 
Wrong forum
When trying to use a clicky assigned to pull, necro always runs on top of the mob to cast rather than from range, is there a fix for this or is that normal.
 
Each resource on RG has an Overview / Discussion Thread and either a link to their wiki or tabs with FAQ, Commands, Etc.
Please make sure to post in the respective discussion thread, and check the FAQ/Commands/Wiki for information before posting.
 
Borgadon said:
When trying to use a clicky assigned to pull, necro always runs on top of the mob to cast rather than from range, is there a fix for this or is that normal.
Click to expand...
that depends on eq.

we nav to the mob, if we find LoS on the way, we stop and cast.
 
Screenshot 2024-04-02 154718.pngScreenshot 2024-04-02 154713.png
I find I do more DPS NOT clicking the burn button for the past two weeks. Finally started to look into it today. I also find I don't click my omm, current era bp, or spire with much consistency. These abilities both fail and necro doesn't attack 20-30s or more.

EDIT: On second check, this isn't specific to MQ2Necro. My Enchanter does the same thing with Focus of Arcanum. In groups they do nothing for the duration of a mob and in raids this turns into them attacking super late. I didn't noticed this was teh case so I'd reclick my burn now button and they'd cycle through these and stop casting yet again.
 
Last edited:
You must log in or register to reply here.
Plugin - MQ2Necro
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -