• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Monk

Plugin - MQ2Monk 3.1.52471.11

Well its me showing u the update i pushed to our dev branch, prolly be pushing our dev updates to master for next build
 
normally we can just push an updater through to the launcher, but because we have some of the ui changes too it would just make your UI fail
 
Just picked this up today, cant seem to get /monk mode 6 to work. Just says character is resting and waiting for valid targets or agro. Any direction would be appreciated. thx guys
 
check your radius and zradius with /monk radius or /monk zradius

to change the value you'll want to put a number at the end. /monk radius 100 /monk zradius 200 etc.
 
How do you add potions for the monk to click for cures etc? In kiss we can do Cures1=Kithar's Disease Treatment|disease|me but im not sure how you do it with MQ2Monk so the monk auto uses it when diseased or needs a potion heal.
 
How do you add potions for the monk to click for cures etc? In kiss we can do Cures1=Kithar's Disease Treatment|disease|me but im not sure how you do it with MQ2Monk so the monk auto uses it when diseased or needs a potion heal.
we don't have any addclicky to cure at the moment

heal you can addclicky healthself or healthgroup, but healthgroup has a bug until next time we push to live, and will just chain use the item if you are already above 60 health
 
HI all, im trying to figure out how to assist on my monk who is not in my main group. can anyone shed some light on that please?
 
I cant seem to get intimidate or disarm to work at all. turned it off and on several times.
We don't use intimidate at rank 1, do you have rank 2 intimidate? (this is 70 with RoS xpac)
Disarm has nothing special - just if you are usedisarm on and you have the ability (which means you're 27+

1593266381180.png
 
I love mq2monk! I'm wondering if there is a way to auto-reset to /mnk mode 0 upon zoning? I have a problem where if we are about to die and I exodus when we land my monk will go pull any npc at the succor point way before I am ready.
 
I love mq2monk! I'm wondering if there is a way to auto-reset to /mnk mode 0 upon zoning? I have a problem where if we are about to die and I exodus when we land my monk will go pull any npc at the succor point way before I am ready.
we recently changed all the plugins that if you are in a pulling mode, and zone - you will swap to the respective non pulling mode (so if you're puller tank and zone like due to death or moving to another zone. This might not work if you just zone in the same zone as your zone id would be the same and your camp would still be in the zone - you're going to want to issue a mode change on your evac button for your group in that case
 
We don't use intimidate at rank 1, do you have rank 2 intimidate? (this is 70 with RoS xpac)
Disarm has nothing special - just if you are usedisarm on and you have the ability (which means you're 27+

View attachment 22653
Oh thank you. I was thinking that i was doing something wrong. MQ2Monk is now required in my life so i was just making sure i had it running correctly!
 
Great Plugin,

Question: is there a specific name for the bando hotkeys I need to make to get the bando swap to work? I haven't been able to get it working yet. monk level is 112 on live server.
 
Great Plugin,

Question: is there a specific name for the bando hotkeys I need to make to get the bando swap to work? I haven't been able to get it working yet. monk level is 112 on live server.

Q. What is UseBandoSwap?
A. UseBandoSwap will check to see if you have both "a bandolier set that uses 2hb" and "a bandolier set that has 1hb or h2h". If it finds both of these sets (the top most set of each type) it will remember those two bandolier sets. if you do not have the buff from Fists of Steel AA, it will swap to your 1hb/h2h set until you proc, and then swap back to your 2hb bandolier.

Considering the Fists of Steel is a pile of crap, I wouldn't even bother with using bandoswap - it will end up being a dps loss a bunch of the time. Fists of steel is broken and will proc with any weapon, and it is very spotty on procing. You probably don't see it swapping because it can take forever for the aa to proc.

but like chat said, no you don't have to name it anything - it just checks your bandolier sets top to bottom to find one set that has a 2hb, and 1 set that has 1hb or h2h and then does the swap during combat based on the proc of that AA
 
Q. What is UseBandoSwap?
A. UseBandoSwap will check to see if you have both "a bandolier set that uses 2hb" and "a bandolier set that has 1hb or h2h". If it finds both of these sets (the top most set of each type) it will remember those two bandolier sets. if you do not have the buff from Fists of Steel AA, it will swap to your 1hb/h2h set until you proc, and then swap back to your 2hb bandolier.

Considering the Fists of Steel is a pile of crap, I wouldn't even bother with using bandoswap - it will end up being a dps loss a bunch of the time. Fists of steel is broken and will proc with any weapon, and it is very spotty on procing. You probably don't see it swapping because it can take forever for the aa to proc.

but like chat said, no you don't have to name it anything - it just checks your bandolier sets top to bottom to find one set that has a 2hb, and 1 set that has 1hb or h2h and then does the swap during combat based on the proc of that AA
Thank you for the reply.
 
As with most pure melee classes, it's limited by the available abilities to the class. So with the monk you can expect it to do all the things a monk can do at that level with the exception of fancy things like split pulling with FD.
Melee classes were notorious for having a very limited set of abilities at lower levels, and that's true now of lower levels even on live.

So the class will operate at the highest capacity it can as a monk regardless of the server it's on. But if you're asking how does the monk stand up to other classes on a server locked on classic? This I cannot answer. That would depend on the group makeup, and what it is you're wanting to achieve. The question is quite broad, and not easily answered. If you have something specific about the class you're interested in we could potentially answer your question better.
 
Is there any way to limit pulls and imitate death if too many? I seem to be pulling way too many and wiping my group with this.
 
Is it possible to add a cure on/off toggle for fights we don't want purify being used on
 
Been looking at MQ2Monk -- is there a way to cycle/rotate STC and Alliance? I have a group with 3 monks that it would be ideal for.
 
Been looking at MQ2Monk -- is there a way to cycle/rotate STC and Alliance? I have a group with 3 monks that it would be ideal for.
well yes, it has alliance, and it checks swift tails if you meet the swift tails endurance check and you don't have the buff, so it would cycle it
 
keep getting the error could not parse group on start up so no parsing avail on monk.. any ideas?
 
keep getting the error could not parse group on start up so no parsing avail on monk.. any ideas?
what do you mean?

can you screensnip your mq2 window?


windowskey+shift+s - then drag over the area to copy, and then control-v to paste here
 
@rpg12
do you have a cfg that does stuff when you log in? or eqbc doing something when you join or pressing a social, or dong some other stuff?

looking at your screen shot that isn't something that mq2monk is doing
 
what do you mean?

can you screensnip your mq2 window?


windowskey+shift+s - then drag over the area to copy, and then control-v to paste here

it's actually in the MQ not MQ2 window. "couldn't parse camp"
Still not seeing any parse on the monk at all.

1595278976413.png
 
it's actually in the MQ not MQ2 window. "couldn't parse camp"
Still not seeing any parse on the monk at all.

View attachment 23242
@rpg12
do you have a cfg that does stuff when you log in? or eqbc doing something when you join or pressing a social, or dong some other stuff?

looking at your screen shot that isn't something that mq2monk is doing
 
Plugin - MQ2Monk

Users who are viewing this thread

Back
Top
Cart