Plugin - MQ2Enchanter 3.1.52471.11

[Sic]

you can also use the slash command if you don't want to click the ignore tab of the enchanter window

>> enchanter commands <<


/enc Ignore - adds your target to the pullignores.ini file in your release folder - will skip this mob in the pull routine.
/enc Unignore - removes your target or typed name from your pullignores.ini file in your release folder.


/enc ShowIgnore - Outputs a list of NPC's being ignored. May show the previous zone if you haven't gone into puller mode in your current zone.

 

[Jalerian]

you click on the ignores tab and check for mobs that were added to your mez ignore

There are no mobs in the MezImmune box on the ignore tab.

 

[ChatWithThisName]

We don't use that spell. "Serene Wave"

I have just started using MQ2Enchanter and I am having some issues with mezzing. I found this earlier in the thread:
"we've always checked in this order if you have mob(s) to mez (and doesn't matter on count) >>> TargetRing->PBAE->Chaotic (if you're using)->Single Mez <<<"

My level 90 enchanter has yet to memorize the TargetRing mez (Serene Wave) much less cast it. He does have the PBAE memorized (Serenity), but he has also never cast it. He does use the single target mez, but very, very sporatically and slow. For instance, I have 4 mobs coming in and he does not cast any mez at all until the first mob is dead...then he only mezes one of the Baelorants or Autachians (in foundation) and does not mez any of the others until the next kill target is killed....this is making it very difficult for my group to stay alive.

I am sure I am missing something simple as usual! I am using Next btw.

We don't use Serene Wave. It's one of the TargetTypes that is Targeted AE (Not a targetring like the "Stare" line. Once we get the "Stare" line at 85 we stop using the "Wave" line.

Stares cannot mez you, which means you can cast it on mobs directly in your face, where-as with the "wave" line you wouldn't cast them if they were close enough you too could be hit with the spell at the time you start casting it.
Your hypnotic stare starts at level 85, and your next spell in the line is at 90. Hypnotic Stare will mez up to level 88 creatures, Soporific Stare (level 90) will mez up to level 93.
Serene Wave is obtainable at level 89, which also does up to level 93, but because of the previous issue I mentioned we opted not to include it in the spell line, in fact, we won't include anymore "wave" spells once we are able to obtain a "Stare" line spell at level 85, making "Ensorcelling Wave" the last of the wave line. Finally, the Stare line cast time is 1 second shorter, with the same recast timer. You get a new one every 5 levels.

Short of it is, we don't use the spell. Gain 1 level, get new stare spell.

 

[Jalerian]

We don't use Serene Wave. It's one of the TargetTypes that is Targeted AE (Not a targetring like the "Stare" line. Once we get the "Stare" line at 85 we stop using the "Wave" line.

Okay, I understand that explanation. Two follow up questions:
1) I do not have Soporific Stare, but I do have Hypnotic Stare. Why does it not memorize and use Hypnotic Stare? What slot should it be memorizing it in?
2) Would this problem also cause the slow reaction and lack of use for the single target mez when I had 3+ mobs in camp?

 

[Sic]

we compare your pbaemez spell against your targetringaemez to see which one is higher lvl and memorize that one.

are you byos?

2. no

I'm curious if the mobs you're fighitng are just too high lvl for the spells you are using or they have some unusual animations where we think they are mezzed

 

[Jalerian]

we compare your pbaemez spell against your targetringaemez to see which one is higher lvl and memorize that one.

Ahh, so it is memming the pbaemez one (Serenity), but it is never using it. Any idea why?

are you byos?

No.

I'm curious if the mobs you're fighitng are just too high lvl for the spells you are using or they have some unusual animations where we think they are mezzed

The mobs that I am fighting are "a baelorat" which is a green earth golem model and "an autarchian" grunt, warrior, etc which are dwarven models. Edit: all below level 85 (which should be well below all mez spells that would be loaded (Serenity and Baffle).

 

[ChatWithThisName]

Well I can't answer directly to those mobs not being mezzed but can look into it.

 

[DarkPaladin]

So randomly, my ENC when it isn't in focus. My spellbook won't close. and stops it from casting. Seems random spells. Mindsunder RK III, Crepuscular Auspice RK II, are the two I noticed it mems and then won't close. Just not everytime though. I manually close the book and everythign works fine until it happens again.

On vorpal mode works fine other wise.
I tried upping the FPS on it as well. ,

 

[durango773]

So randomly, my ENC when it isn't in focus. My spellbook won't close. and stops it from casting. Seems random spells. Mindsunder RK III, Crepuscular Auspice RK II, are the two I noticed it mems and then won't close. Just not everytime though. I manually close the book and everythign works fine until it happens again.

On vorpal mode works fine other wise.
I tried upping the FPS on it as well. ,

just my 2cp.. and maybe not the cause... had issues with chanter chilling in book.. went with recommended background from Sic/next vid.. and also set the buff/ing people.. cant check buffs if they are all /drool...

server lag is a part also (FV, lag city), but if the folks cant reply due to lag, makes chanter go hmm they dont have *spell id xxxx* let me call it up, oh, nvm, then a lockup as they go in circle.. again, just my 2cp

 

[Sic]

So randomly, my ENC when it isn't in focus. My spellbook won't close. and stops it from casting. Seems random spells. Mindsunder RK III, Crepuscular Auspice RK II, are the two I noticed it mems and then won't close. Just not everytime though. I manually close the book and everythign works fine until it happens again.

On vorpal mode works fine other wise.
I tried upping the FPS on it as well. ,

for most folks, it ends up being the background FPS as mentioned in the >>> FAQ <<<

this shouldn't be an issue if you're using frame limiter, as frame limiter overrides your minimum and sets it to the simulation. so if you're running frame limiter at the suggested settings this shouldn't be an issue.

you can also turn on usemelee, if this ends up being something like server lag or whatnot causing it.

 

[DarkPaladin]

for most folks, it ends up being the background FPS as mentioned in the >>> FAQ <<<

this shouldn't be an issue if you're using frame limiter, as frame limiter overrides your minimum and sets it to the simulation. so if you're running frame limiter at the suggested settings this shouldn't be an issue.

you can also turn on usemelee, if this ends up being something like server lag or whatnot causing it.

I'm using the limiter in the Lua. I'll tinker around a little more with it. I have a beefy system. So I don;t have an issue with turning things up for sure. I'll peruse the FAQ as well too.

 

[Garbonzo]

There have been multiple comments and questions about CoD mobs and going through the levelling process on MQ2Enchanter I can answer that once you have Bless of the Nihil at 65 it will replace the PBAE stun and your problems will go away with the targeted AE spell. You become a mezzing machinegun with Bliss all of a sudden. I know it is late to the party, but hopefully this helps people in the future. I'm not sure if the mobs were added to the mezz immune list, but I cleared it once I got Bless of the Nihil just to make sure. I was also having issues, but they dissolved once I got Bless of the Nihil. Happy hunting.

 

[DarkPaladin]

So everything is going well. But my chanter keeps recasting addle every other cast. Chatoic is turned off. two mobs in camp and boom one cast of whatever then addle on the other mob then one cast of whatever then addle. Doesn't even wait for the addle time to really run the time. Just recasts it every other cast. It doesn't need to refresh that that fast...

also, when I turn chaotic on. It casts chatoic every other cast... Then it casts things like slow and such between it. It doesn't even cast a twincastable spell..

I'm 118 almost 119 right now.. Any ideas?

 

[Sic]

So everything is going well. But my chanter keeps recasting addle every other cast. Chatoic is turned off. two mobs in camp and boom one cast of whatever then addle on the other mob then one cast of whatever then addle. Doesn't even wait for the addle time to really run the time. Just recasts it every other cast. It doesn't need to refresh that that fast...

also, when I turn chaotic on. It casts chatoic every other cast... Then it casts things like slow and such between it. It doesn't even cast a twincastable spell..

I'm 118 almost 119 right now.. Any ideas?

what mobs are you fighting specifically
what zone are you in with these mobs specifically

 

[DarkPaladin]

a shadow wolf, a winged scavenger a broken vampyre. Those types in the ME.

 

[Sic]

a shadow wolf, a winged scavenger a broken vampyre. Those types in the ME.

and you are specifically saying for all 3 of those mobs that it spams addle?

I'm not asking "what in general mobs are you fighting" i'm specifically asking "what mobs specifically are you saying there is spamming of addle" on

trying to determine if the mob you are reporting this behavior on is a mob with a weird animation

 

[DarkPaladin]

Those are the three mobs currently in the camp I am at, They get mezzed and all, but it refreshes addle every other cast. nothing is breaking mez SW corner camp in ME.

Also during the chaotic sequences it just does slowing helix after chaotic most of the time. Seems odd to me.

 

[DarkPaladin]

and you are specifically saying for all 3 of those mobs that it spams addle?

I'm not asking "what in general mobs are you fighting" i'm specifically asking "what mobs specifically are you saying there is spamming of addle" on

trying to determine if the mob you are reporting this behavior on is a mob with a weird animation

Ahh I see. it's just acting wierd.

 

[Yoric70]

I just rolled up a 6 box on live and I'm having a blast with it! I'm just having one issue so far, and that's with MQ2Enchanter. I'm finding that on large pulls, my enchanter is only mezing one mob at a time, and usually it's at the end of the fight. The enchanter will always dot or DD prior to mezing all mobs in camp. I've tried different stances and looking through the settings, but just can't figure how how to make Mez the number one priority. Any help is appreciated!

 

[Sic]

I just rolled up a 6 box on live and I'm having a blast with it! I'm just having one issue so far, and that's with MQ2Enchanter. I'm finding that on large pulls, my enchanter is only mezing one mob at a time, and usually it's at the end of the fight. The enchanter will always dot or DD prior to mezing all mobs in camp. I've tried different stances and looking through the settings, but just can't figure how how to make Mez the number one priority. Any help is appreciated!

hello yoric,


please post in the correct location.

sounds like you might have issues with your xtarget window.

make sure you have it set to turned on, and auto so it can populate with mobs.

Otherwise I would check your mez ignores, and also ensure that you are mez is usable against the creatures you are fighting, we won't use it if it isn't going to work

 

[ChatWithThisName]

It's also relevant to know what lvl you are and what your AoE mezspell is. Some mez AoE spells can mez you too, and we avoid doing that.

 

[Yoric70]

Sorry, I’m still pretty new to this. Apparently my mez spell was being resisted quite a bit, which gave the impression that it wasn’t being cast. I solved the issue by fist making my enchanter announce mez’s and then by casting tash before mez.

 

[Sic]

k

thanks for the followup

 

[Chibz]

Sorry if I missed this from an earlier thread, but my enchanter does not use the mage summoned Dazzling Modulation Rod. My enchanter is 115 and the rod is summoned by a 120 mage. I can manually click it and it works. I can confirm it is added to my enchanter useclicky list under ManaSelf Clickies.

 

[Sic]

Sorry if I missed this from an earlier thread, but my enchanter does not use the mage summoned Dazzling Modulation Rod. My enchanter is 115 and the rod is summoned by a 120 mage. I can manually click it and it works. I can confirm it is added to my enchanter useclicky list under ManaSelf Clickies.

any item added to manaself clickies would get used at or below 60% mana, as long as it sin't going to bring you too low in health.

what is your health? the dazzling does 105k dmg and we wouldn't use it if it took you below 20% health

 

[Chibz]

OMG Sic you are the man! My health is only 114K lol

Cheers!

 

[Sic]

OMG Sic you are the man! My health is only 114K lol

Cheers!

y u abusing your toons!

 

[remix2010]

with the increase to charm pets in ToV onwards, how effective is charm killing with mqench now?

 

[Sic]

with the increase to charm pets in ToV onwards, how effective is charm killing with mqench now?

i've been doing it with great results

had to add mage summon weapons to my lootly ignore tho!

 

[remix2010]

seethats my plan, doin a mage group then once their about 105/110 adding a 115 ench to the fold i think or a 114 bst cant deicde i love bsts

 

[ChatWithThisName]

seethats my plan, doin a mage group then once their about 105/110 adding a 115 ench to the fold i think or a 114 bst cant deicde i love bsts

Curious why you would stop at 114.

 

[remix2010]

All honestly, he was a box which i enjoyed, got him to 114, then Was waiting for RG to update for test, and notriced a server on eqemu did a xpac update etc, so went there for a while

 

[ChatWithThisName]

Sic updated MQ2Enchanter with a new update entry:

Jan-17-2022

Some of these already were active, now that RG is building directly, we should be able to keep update notes updated.

MQ2Enchanter -
- Handle duplicate spell name for PBAE mez and SingleTargetMez (Bewilderment).
- Should now use Appropriation line when in BYOS.
- Added some additional mez animations to handle netherbian.

- AutoMezImmune will no long automatically add things to MezImmunes if it's just immune to that spell, and not completely immune.
-...

Read the rest of this update entry...

 

[Eq Dna]

So,
Enchanter charms a pet.
I pull the next mob.
Group engages on new mob and enchanter's charmed pet engages mob.
Chanter casts Chaotic. The video says to get the twinproc from it.
However, as soon as Chaotic lands the enchanters pet deagroes and stands next to the enchanter doing nothing.

What setting do I have screwed up?

 

[Sic]

So,
Enchanter charms a pet.
I pull the next mob.
Group engages on new mob and enchanter's charmed pet engages mob.
Chanter casts Chaotic. The video says to get the twinproc from it.
However, as soon as Chaotic lands the enchanters pet deagroes and stands next to the enchanter doing nothing.

What setting do I have screwed up?

we would only back your pet off if it was doing something it wasn't supposed to.


need more information than what you provided.

do you have an MA set

is the ma fighting the mob

is the mob inside your campradius

is the mob under the health threshold

is the mob under the world where your pet can't engage it?

does this happen every pull

is your charmed pet currently charmed when you say this happens

etc.

 

[Eq Dna]

we would only back your pet off if it was doing something it wasn't supposed to.


need more information than what you provided.

do you have an MA set

is the ma fighting the mob

is the mob inside your campradius

is the mob under the health threshold

is the mob under the world where your pet can't engage it?

does this happen every pull

is your charmed pet currently charmed when you say this happens

etc.

Ok,
Looks like I have an assignment.
Now I will be forced to play EQ for hours instead of doing things for my wife around the house this week-end.
I will gather the necessary information commander.

 

[Myysterio]

Had an issue with my enchanter improved twincasting for burns and spent the next 2 mins chain casting chaotic puzzlement.

 

[Sic]

Had an issue with my enchanter improved twincasting for burns and spent the next 2 mins chain casting chaotic puzzlement.

We check for the improved twincast buff before trying to use chaotic for the purposes of getting the twincast (well in one spot, might be another spot that just checks if we have the twincast from chaotic). I can take a look at it


but if you don't want to use chaotic for that purpose you can disable it

Q. Why does it cast Chaotic on the mob we're fighting?
A. We use Chaotic for purposes of the twincast it gives.
If you don't want it to use Chaotic you can /enc UseChaotic off

 

[Myysterio]

We check for the improved twincast buff before trying to use chaotic for the purposes of getting the twincast


but if you don't want to use chaotic for that purpose you can disable it


Q. Why does it cast Chaotic on the mob we're fighting?
A. We use Chaotic for purposes of the twincast it gives.
If you don't want it to use Chaotic you can /enc UseChaotic off

Well.. Normally I want puzzlement on, but it was trying to proc twincast and couldnt get it on cause it had twincast IX on. I want it trying to proc twincast, I dont want it to sit there casting mez for 2 mins. I was watching it try and chain cast puzzlement for more than a minute before i realized what it was doing, unchecked chaotic and it went back to nuking.

 

[Sic]

might be another spot that just checks if we have the twincast from chaotic. I can take a look at it.

if you don't want to use chaotic for that purpose you can disable it /enc UseChaotic off