• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2CWTNCommons

Utility - MQ2CWTNCommons

Overview Updates (274) Reviews (7) Discussion
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

2/17/2023

- Added the ability to exempt specific spells from having rank checking
-- this allows spells that cast the incorrect rank if you go silver/bronze/wood/dirt/dogpoo
--- current examples: velocity lines from bst, Spirit of Siver, Iceflame Barricade, Symbiotic Alliance
Click to expand...

Read the rest of this update entry...
 
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

3/15/2023

- Summon Companion toggle
-- Classes with the Summon Companion AA ability can toggle the usage of it.
--- This is not a UI Window option, this is only a slash command option.
-- If you turn this off and your pet is stuck under the world because EQ sucks, that is your fault.
- Note: These automations aren't meant to be "sneaky"
-- This addition of the Summon Companion toggle is *purely* because of the manacost that was brought up.
-- If you get declined a guild application because you are...
Click to expand...

Read the rest of this update entry...
 
asking because i dont see it mentioned is there a fix for melee coming on test KA is engaging with Melee as is Rg but CTWN's are not
 
dysmal said:
asking because i dont see it mentioned is there a fix for melee coming on test KA is engaging with Melee as is Rg but CTWN's are not
Click to expand...
No because that isn't a CWTN plugin issue that is a MQ on test server issue. Brain said there will be fixes
 
ChatWithThisName said:
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

4/2/2023



Read the rest of this update entry...
Click to expand...
Is this fix in the current build? If not, then no worries. I ask, because there was an update yesterday, but the issue is still there. To be clear, the issue at hand is below:

When enchanter Twincast aura is up, the mage will not utilize the spell: twincast. The mage does use the spell when the aura is not up. The improved twincast AA is used when its conditions are met, with or without the aura, and has always been the case to my knowledge.
 
Kazimere said:
Is this fix in the current build? If not, then no worries. I ask, because there was an update yesterday, but the issue is still there. To be clear, the issue at hand is below:

When enchanter Twincast aura is up, the mage will not utilize the spell: twincast. The mage does use the spell when the aura is not up. The improved twincast AA is used when its conditions are met, with or without the aura, and has always been the case to my knowledge.
Click to expand...
Should be there.
 
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

4/19/2023

- Cleanup trailing space usage
-- This is going to correct spells like Burnout XI? or Canni III etc
- Consolidate SpellInBook checking
- Updated DataTempType
- Misc cleanup
- Adding some utility commands to allow for manual usage of certain ability/traits
-- details to come
Click to expand...

Read the rest of this update entry...
 
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

4/22/2023

- added an "on demand" output for when the plugin is using an AA by command/hotkey instead of automatically.
-- example: dashAA, aainvis, etc.
- Our IsMemorized functions now check for spell against gem spell ID rather than by name
-- this is because things like "Ring of cobalt scar" are the same name, but different ID/level. Since we are already passing the eq_spell*, we can just check ID without having to do other stuff like store and pass around levels.
- Updated DumpAggro to use the "On...
Click to expand...

Read the rest of this update entry...
 
FYI - the "click logo to pause" function seems slightly broken today.

Click to pause works, but click to unpause doesn't (have to issue a '/shm pause off' command)

Same with War - presume it's all of them
 
ABDon said:
FYI - the "click logo to pause" function seems slightly broken today.

Click to pause works, but click to unpause doesn't (have to issue a '/shm pause off' command)

Same with War - presume it's all of them
Click to expand...
1682235421227.png
Instead of clicking "CWTN" logo, click the "Paused" word. -Should- work that way. The logo being a "toggle" was causing an issue with emu and as of now the only way I could implement the fix was to have the CWTN Logo turn on pause, and the Pause logo turn it off (which was the intended behavior prior to the change)

Above you can get an idea of the area the button covers, essentially the logo and anything right and down of it. But best to just click the Pause picture itself.
 
ChatWithThisName said:
View attachment 48031
Instead of clicking "CWTN" logo, click the "Paused" word. -Should- work that way. The logo being a "toggle" was causing an issue with emu and as of now the only way I could implement the fix was to have the CWTN Logo turn on pause, and the Pause logo turn it off (which was the intended behavior prior to the change)

Above you can get an idea of the area the button covers, essentially the logo and anything right and down of it. But best to just click the Pause picture itself.
Click to expand...
Aha! that works, lovely, thank you
 
ok now since last patch my toons pause and wont un pause ,,, whats the deal and its the plugins thats doin it not the kiss
 
nuggy said:
yes cwtn , they just pause and wont un pause no matter what i do
Click to expand...
NO MATTER WHAT I DO!!!!!

try clicking the "pause logo"
try using the command or a hotkey
try clicking the link dromel shared which says those things.


and please post in the right location.
 
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

4/28/2023

- In Combat check for End Regen
-- We were already checking you don't have any mobs engaged on you (xtarget),
--- but now we will additionally check for if we think you are in combat or not
- Added a check to "resume" our pets, with the new discipline option
- Added an additional half second delay command for sending in swarm pets
Click to expand...

Read the rest of this update entry...
 
What is the easiest way to pause all class plugins from one button? /bcaa //xxx pause 1 doesn't work.
 
Butters said:
That doesn't work. DoCommand - Couldn't parse '/cwtna pause on'
I've seen others asking to pause on zones with a .cfg file. I don't see any previous post on making a hot button for this in your link.
Click to expand...
Because you didn't click the link and then setup the alias

Please click the link.

No alias means it won't work.



www.redguides.com

Utility - Sic's Hotkeys

*** IMPORTANT*** (as of September 2023 we make the aliases for you if you dont already have them) To use the /cwtn and /cwtna etc ALIASES, please make sure you create them. There are instructions down below. Please don't listen to the "Chase...
www.redguides.com www.redguides.com
 
Sic said:
Because you didn't click the link and then setup the alias

Please click the link.

No alias means it won't work.



www.redguides.com

Utility - Sic's Hotkeys

*** IMPORTANT*** (as of September 2023 we make the aliases for you if you dont already have them) To use the /cwtn and /cwtna etc ALIASES, please make sure you create them. There are instructions down below. Please don't listen to the "Chase...
www.redguides.com www.redguides.com
Click to expand...
I clicked on the link. The word "alias" is nowhere to be found on the page. I just want a simple hotkey command to pause, why do I need alias's?

Edit the "getting started link" didn't contain an alias. I see you added the link to hotkeys, thank you. I'll look at that.

Edit2. I added those lines to the .ini file and it's working!
 
Last edited:
Butters said:
I clicked on the link. The word "alias" is nowhere to be found on the page. I just want a simple hotkey command to pause, why do I need alias's?

Edit the "getting started link" didn't contain an alias. I see you added the link to hotkeys, thank you. I'll look at that.

Edit2. I added those lines to the .ini file and it's working!
Click to expand...
Yep. The sticky that says "check here first" with all the info, definitely has the hotkeys link in it.

You don't have to have the aliases if you want, but if you want an easy cross cwtn plugins way to control all the things they do, you want the set it up.

Re me adding the direct link, yep I did, because you didn't seem like you wanted to take time to click the stuff and read what the page says.

Glad you found it and set it up.

You might consider mq2boxr to control some of the basics across automation suites - you still want the cwtn aliases for stuff outside of what boxr has
 
ChatWithThisName updated MQ2CWTNCommons with a new update entry:

5/23/2023

- Added additional debugging for missing reagents
-- this came up with some custom EMU servers removing requirements from spells, but MQ still thinks those requirements are valid, will be helpful debugging
- Added funcionality to check for spawns in radius of our target
-- This is currently (future) only used for hweee-zaaaard spells
- Lesson "on demand" example: "/shd lesson"
-- this doesn't interrupt or stop anything, but means you don't need to remember an "/dgga /alt act 481" and can...
Click to expand...

Read the rest of this update entry...
 
You must log in or register to reply here.
Utility - MQ2CWTNCommons
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -