• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
MQ2Cleric

Plugin - MQ2Cleric (5 Viewers) 3.1.52471.11

Overview Commands Instructions F.A.Q. Updates (94) Reviews (33) History Discussion Terms and conditions

CWTN Cleric plugin will not show UI for starters. /show clr is not effective. Also, Cleric will not stop buffing until OOM and then begins casting Persistence again. Please help​

 
/clr toggleui - Toggles visibility of the CWTN UI Window
/clr reload - updates the skills/abilities/discs, updates clickies from the INI etc.
sometimes the /clr reload will freeze up so sometimes you have to relog
 
Eitac said:

CWTN Cleric plugin will not show UI for starters. /show clr is not effective. Also, Cleric will not stop buffing until OOM and then begins casting Persistence again. Please help​

Click to expand...
1st - The commands need to be typed correctly. /show clr is not an actual command. Look here: https://www.redguides.com/community/resources/mq2cleric.1498/field?field=commands

2nd - If you are buffing over and over, looks to see who else is trying to cast which or has something that is preventing the buff from landing and block the spell in question.
 
So on the TLP and max level atm is 85. We have Gallantry for our aego. Clerics buff the group no problems but pets, they are obsessed with trying to land conviction on pets (including swarm pets or weapon proc pets)
 
Raidien1 said:
So on the TLP and max level atm is 85. We have Gallantry for our aego. Clerics buff the group no problems but pets, they are obsessed with trying to land conviction on pets (including swarm pets or weapon proc pets)
Click to expand...
I don't which TLP is "the TLP".

Is this meant to be a statement or a question. If it's a question please rephrase it into a question so I know what it is you are asking.
 
Raidien1 said:
So on the TLP and max level atm is 85. We have Gallantry for our aego. Clerics buff the group no problems but pets, they are obsessed with trying to land conviction on pets (including swarm pets or weapon proc pets)
Click to expand...
We definitely do not buff swarm, pets or non-f1 pets.

For any pets that you do not want buffs on, you would add any buff to their blocked pet list.

I would make sure you don't have any conflicting automations running.

Please see >>> Getting Started with CWTN plugins! (Movement, UI Window, Clickies, Pulling, ETC) Check Here First! <<<
 
@Sic and @ChatWithThisName none of this is trying to flame. I am just trying to help make a good product better. There is some code in mq2clerics thats driven clerics to try and buff pets with an out dated spell. I might of over reached for swarm pets but i know for damn sure its trying to buff my rangers pet that procs from his Scimitar of the Mistwalker.

As for the TLP, Rizlona is the true TLP. (I don't know what that means) Also no other automations running unless the Russians hacked me.
 
Raidien1 said:
@Sic and @ChatWithThisName none of this is trying to flame. I am just trying to help make a good product better. There is some code in mq2clerics thats driven clerics to try and buff pets with an out dated spell. I might of over reached for swarm pets but i know for damn sure its trying to buff my rangers pet that procs from his Scimitar of the Mistwalker.

As for the TLP, Rizlona is the true TLP. (I don't know what that means) Also no other automations running unless the Russians hacked me.
Click to expand...
"Might have over reached". Well giving blatantly bad information is just going to get me to ignore your post. If you post something that is flat out a lie/wrong, I can't help you. Please don't waste our time.

No one said you were flaming, take a chill pill. :p And your "I just want to make a good product better" sounds antagonistic. Neither chat or i thought you're flaming or coming for a fight. in the "please read this sticky" there is a "how to get help" which explains how to best get help - chat was asking you to rephrase your message into a question because he often doesn't want to assume he understands what is being asked, and doesn't mind waiting for a reply before digging deep. I personally will end up just refreshing over and over waiting for a reply, so i often/usually/always? end up giving an answer based on the information provided

Block any spell on pets you don't want.

We only buff "actual pets" anything that would be an F1 "target my pet that I have a pet window pet" for. That is a pet, and we buff that. Swarm pets aren't F1 pets, and we don't buff them.

Mq/eq has some weird stacking in the mid-levels, where stuff will say it is missing and stacks, so we'll cast it.

This is explained in the FAQ.

Each single target and group spell line that we use, we keep info on those spells. We buff first with our group spell (hopefully hitting pets) and then check if any pets need a buff, and then only cast the single target version on them.

We cast single target buffs on pets if mq says they're missing it and can stack.

Block anything you don't want.


re: the actual spells
the "Aegolism" group has gallantry, the "GroupAegolism" would have Hand of Gallantry

Unless you're missing spells, we would no longer be memorizing and casting Conviction.

If you are missing tenacity, temerity, and gallantry, then we would be trying to case the "Aegolism" spell we know, which would be Conviction.

When the plugin loads you can see what spells are in what spell group.

If you're missing spells, you should go get them.

If you're not missing spells (and not manually memorizing Conviction, as there is some help for lower level and / byos to memorize a few buffs that we just say "do we have this buff memorized, let's check if anyone needs it" --- in which case, don't memorize it), please show me a snip of your plugin output showing your Aegolism and GroupAegolism groups, as well as a snippet of the plugin casting it on a pet, because that doesn't appear something possible
 
Ok, so i have to fix it.(before I was sincere, that was antagonistic) Do I block the spell on the clerics pets block window, or go to all chars with a pet proc weapon and block it there?
 
Raidien1 said:
Ok, so i have to fix it.(before I was sincere, that was antagonistic) Do I block the spell on the clerics pets block window, or go to all chars with a pet proc weapon and block it there?
Click to expand...
re-read my post please and thank you. I provided additional information that you should consider reading.

and real seriously, there's 0 reason to be antagonistic. like at all.

options:
A: just knock it off and move on like we're (you, me, cwtn) mutually trying to help you, because that is what is actually happening
B: don't and go to fippys

further continuation of nonsense will just go right to fippys, we're all adults, and there is no reason for it. at all.

so let's stick to checking the things i mentioned in the previous post.

Yes - anyone who has a pet (even if it is a temporary pet, that is an F1 pet --- like if they were charming or summoning it, or proccing it - THAT person would add any buff they don't want to their blocked buffs.

Billy the Cleric doesn't know you don't have a good relationship with your mistysword of sweetness - he's like "oh, lartik, sweet mistysword, you're missing xyz buff lad, here ya go" and then lartik goes away and billy the cleric is turbo sads - but when Boner comes out, Billy gets excited again.

CrankyPants the ranger could just add the buff to their blocked pet buffs and then we wouldn't buff it because CrankyPants the ranger is saying "hey billy, please don't cast xyz spell on my pets"
 
its literally been in the infos since day one, block spells on things you dont want to buff, this is how we control who to buff, very simple, and easy to use blockspell commands.
 
The issue was the fact conviction was the last single Aego spell I gave him.(oops) Had all the group ones just never cared about the singles. Someone pass the sugar for this bowl of crow i got to eat. I will block the spell on CrankyPants. Thanks for the help in the end.
 
Raidien1 said:
The issue was the fact conviction was the last single Aego spell I gave him.(oops) Had all the group ones just never cared about the singles. Someone pass the sugar for this bowl of crow i got to eat. I will block the spell on CrankyPants. Thanks for the help in the end.
Click to expand...
all good homie - you and me, we're on the same team
 
good day!

I dunno if this has been posted before but, I sometimes see my cleric, with his spellbook open, thus not healing the warrior.

Anyone experienced it before and what is the possible solution for this?

thanks!
 
synthaxx17 said:
good day!

I dunno if this has been posted before but, I sometimes see my cleric, with his spellbook open, thus not healing the warrior.

Anyone experienced it before and what is the possible solution for this?

thanks!
Click to expand...
are you using frame limiter? sounds like your background client (cleric) is possibly being starved.


side note, use melee on your cleric. A they overheal, B who doesnt like to *crush* stuff.


side note 2, this will force them out of book, if your client is optimized, but server sucks..
 
synthaxx17 said:
good day!

I dunno if this has been posted before but, I sometimes see my cleric, with his spellbook open, thus not healing the warrior.

Anyone experienced it before and what is the possible solution for this?

thanks!
Click to expand...
Yep. This means that your eqclient is being starved of processing power.

Check the FAQ as it is mentioned there

I would ensure you have framelimiter setup, and you are not using any non mq ways of capping your background frames.

Durango is correct.

With the new eq UI slamming people for performance this isn't unexpected that this issue would popup again.

Unfortunately if mq can't see the spellbook is open, then we don't know it is open to close it.
 
Thank you for the responses.

Yes, I'm using frame limiter.

I have unchecked the box and will see how it will run now.

Thank you once again!
 
synthaxx17 said:
Thank you for the responses.

Yes, I'm using frame limiter.

I have unchecked the box and will see how it will run now.

Thank you once again!
Click to expand...
You absolutely want to be using frame limiter unless if for some reason there's a conflict that's causing performance issues while using it.

Frame limiter is to reduce performance load so macro quest can do happy stuff in the background
 
Sic said:
You absolutely want to be using frame limiter unless if for some reason there's a conflict that's causing performance issues while using it.

Frame limiter is to reduce performance load so macro quest can do happy stuff in the background
Click to expand...

Noted. I have again checked the Frame Limiter.

I also followed the advise of durango773 and just used my Cleric to melee assist.

Sadly though, the problem now moved to my Mage (also using CWTN).

I have observed him using/opening his spellbook and thats it, he is stuck lol.

Will check with the Frame Limiter on, if it solves the problem.

Thanks!
 
synthaxx17 said:
Noted. I have again checked the Frame Limiter.

I also followed the advise of durango773 and just used my Cleric to melee assist.

Sadly though, the problem now moved to my Mage (also using CWTN).

I have observed him using/opening his spellbook and thats it, he is stuck lol.

Will check with the Frame Limiter on, if it solves the problem.

Thanks!
Click to expand...
Make sure EQ's Max Background/Foreground FPS settings are something more than 60 fps as well. (Unlimited for both would be best).
 
Many_Whelps said:
Make sure EQ's Max Background/Foreground FPS settings are something more than 60 fps as well. (Unlimited for both would be best).
Click to expand...
The plugins will set it to at 30 if it is lower.

The problem is, if they're getting resource starved, it doesn't matter what it is set to

synthaxx17 said:
Noted. I have again checked the Frame Limiter.

I also followed the advise of durango773 and just used my Cleric to melee assist.

Sadly though, the problem now moved to my Mage (also using CWTN).

I have observed him using/opening his spellbook and thats it, he is stuck lol.

Will check with the Frame Limiter on, if it solves the problem.

Thanks!
Click to expand...
You want framelimiter.
 
synthaxx17 said:
Noted. I have again checked the Frame Limiter.

I also followed the advise of durango773 and just used my Cleric to melee assist.

Sadly though, the problem now moved to my Mage (also using CWTN).

I have observed him using/opening his spellbook and thats it, he is stuck lol.

Will check with the Frame Limiter on, if it solves the problem.

Thanks!
Click to expand...
Starship Troopers GIF
would you like to know more starship troopers GIF
 
Would like to report what is, if not a bug, then at least something probably not taken into account by the developer because "what kinda crazy nut would run their character like that!?!?!?"

My main is a 120 cleric, and I frequently use it as the tank (don't judge me) when boxing with my second account and working to level up another toon. I enjoy the "Sic Tank" setting as I can easily move around, target and attack something, and the plugin just takes over until it's dead. The problem is that when using a cleric as a Sic Tank, I will target a mob, attack, fight starts, my merc, my second account toon (who is also running one of these plugins set on either chase or vorpal (I've tried both)), and the second account merc all jump in to help as soon as the mob hits 98%. Then shortly thereafter the cleric takes a quick break to target one of his groupmates and heal him, then waits patiently for another group member to need heals and does not switch back to the mob he was attacking originally. In the meantime, the second account toon has stopped attacking the mob since he's trying to assist the cleric, who is now targeting another group member. The 2nd account won't starting helping again until I re-target the mob, either manually, or by switching the cleric to Tank mode. I'm thinking that Sic Tank mode should be able to remember what mob it was on before switching to a group member, then switch back to that mob after it has done it's healing, or to another mob that is currently agroed if the original mob died while the healing is going on. I've been getting around this mainly by constantly switching the mode back and forth. Sic Tank, then once the fight starts I switch to Manual (to make it forget the previously memorized camp location), then to Tank (so the cleric will fight all the aggroed mobs until dead. Then once the fight is over, switching back to Sic Tank and moving on.

If anybody knows something I'm doing wrong (other than using a cleric for a tank :) ) , or a better way to handle this, please let me know.
 
CoolManJoe27 said:
Would like to report what is, if not a bug, then at least something probably not taken into account by the developer because "what kinda crazy nut would run their character like that!?!?!?"

My main is a 120 cleric, and I frequently use it as the tank (don't judge me) when boxing with my second account and working to level up another toon. I enjoy the "Sic Tank" setting as I can easily move around, target and attack something, and the plugin just takes over until it's dead. The problem is that when using a cleric as a Sic Tank, I will target a mob, attack, fight starts, my merc, my second account toon (who is also running one of these plugins set on either chase or vorpal (I've tried both)), and the second account merc all jump in to help as soon as the mob hits 98%. Then shortly thereafter the cleric takes a quick break to target one of his groupmates and heal him, then waits patiently for another group member to need heals and does not switch back to the mob he was attacking originally. In the meantime, the second account toon has stopped attacking the mob since he's trying to assist the cleric, who is now targeting another group member. The 2nd account won't starting helping again until I re-target the mob, either manually, or by switching the cleric to Tank mode. I'm thinking that Sic Tank mode should be able to remember what mob it was on before switching to a group member, then switch back to that mob after it has done it's healing, or to another mob that is currently agroed if the original mob died while the healing is going on. I've been getting around this mainly by constantly switching the mode back and forth. Sic Tank, then once the fight starts I switch to Manual (to make it forget the previously memorized camp location), then to Tank (so the cleric will fight all the aggroed mobs until dead. Then once the fight is over, switching back to Sic Tank and moving on.

If anybody knows something I'm doing wrong (other than using a cleric for a tank :) ) , or a better way to handle this, please let me know.
Click to expand...
any of the tank modes will only do tanking stuff to mobs in camp, on xtarget etc. so roaming around you either a: need to reset your camp or b: leave a camp mode to manual then re-enter a camp mode setting a new camp where you are at.

that is intended.

they also need to be set to main assist.

you should look at the sticky and the "how i move my toons" guide about sictank, and utilize the "reset camp" hotkey,

all explained there
 
Hi all. Looking for some help on troubleshooting why MQ2Cleric stopped casting buffs for self and group: Hand of Gallantry RKII, Aura of the Pious, etc. Cleric does cast Armor of the Devout RKII and downtime clicky buff for Aura of Black Petals but can't seem to get any other buff to cast. All other MQ2Cleric functions seem to work as intended.

I have attempted the following so far:
  • BYOS is un-checked.
  • Use Hand on/off
  • Use Symbol on/off
  • Unload/load MQ2Cleric
  • Unload/load MQ2CWTNBuffs

It worked perfectly until i noticed buffs were not auto casting in the last few days. Any thoughts or suggestions?
 
Sevirath said:
Hi all. Looking for some help on troubleshooting why MQ2Cleric stopped casting buffs for self and group: Hand of Gallantry RKII, Aura of the Pious, etc. Cleric does cast Armor of the Devout RKII and downtime clicky buff for Aura of Black Petals but can't seem to get any other buff to cast. All other MQ2Cleric functions seem to work as intended.

I have attempted the following so far:
  • BYOS is un-checked.
  • Use Hand on/off
  • Use Symbol on/off
  • Unload/load MQ2Cleric
  • Unload/load MQ2CWTNBuffs

It worked perfectly until i noticed buffs were not auto casting in the last few days. Any thoughts or suggestions?
Click to expand...
this can happen if you have things like:

you set files to read-only in your config folder
you are file scanning your mq folder(s) with AV causing file locking
you are causing file locking with one-drive or other syncing programs
you are using a non-working UI, where your buffs aren't being displayed to MQ correctly.

considering you are saying it is not casting self buffs, i wouldn't think it was file locking, as we're not checking any cwtnbuffs for self buffs - we're checking MQ.
 
Sic said:
this can happen if you have things like:

you set files to read-only in your config folder
you are file scanning your mq folder(s) with AV causing file locking
you are causing file locking with one-drive or other syncing programs
you are using a non-working UI, where your buffs aren't being displayed to MQ correctly.

considering you are saying it is not casting self buffs, i wouldn't think it was file locking, as we're not checking any cwtnbuffs for self buffs - we're checking MQ.
Click to expand...
Yes, it is very weird. I am using MQ2ENC, MQ2WAR, MQ2SHM, MQ2ENC, MQ2ROG, MQ2ZERK and they all working as intended as well so doubt it has to do with locked folders files but went ahead and I unlocked all files and folders from MQNext folder down. Reload UI back to default and still the same issue. Also now notice cleric will summon and rez entire group but not self. I am sure it is something very stupid I did but can't find anything that would cause this.
 
Sevirath said:
Yes, it is very weird. I am using MQ2ENC, MQ2WAR, MQ2SHM, MQ2ENC, MQ2ROG, MQ2ZERK and they all working as intended as well so doubt it has to do with locked folders files but went ahead and I unlocked all files and folders from MQNext folder down. Reload UI back to default and still the same issue. Also now notice cleric will summon and rez entire group but not self. I am sure it is something very stupid I did but can't find anything that would cause this.
Click to expand...
I dunno - I'd suggest starting fresh with your cleric's UI

rezzing everyone else but your yourself is very strange indeed
 
Sic said:
I dunno - I'd suggest starting fresh with your cleric's UI

rezzing everyone else but your yourself is very strange indeed
Click to expand...
Thanks for the quick response. Looks like it was something with UI. Deleted all Cleric UI files and deleted/reinstalled the plugin for safe measure and all working again.
 
You must log in or register to reply here.
Plugin - MQ2Cleric
Next unread thread 🦁

Users who are viewing this thread

  • G
Total: 6 (members: 1, guests: 5)
Back
Top
Cart

Cart

Total -