-
You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋
- Thread starter ChatWithThisName
- Start date
)
correct. until VV is rebuilt heals/heals do not work which has been spoken about several times in the mq2cleric thread
(since it turns out you are talking specifically about and for mq2cleric i moved your post to the mq2cleric section).
and looks like redbot, like the
Heals/Heals is working again "and the villagers rejoiced... yay"
however, you will need to turn off domelee
however, you will need to turn off domelee
/clr domelee off until next update, as it won't swap target to heal if you're fighting something (yeah that is stupid lol, sorry)
After this recent update I'm seeing an odd issue. My Cleric is level 41 and I generally keep her on Mode 1 with DoMelee Off. What I'm seeing is when my SK brings a mob in, the cleric targets the mob and will not heal unless I alt-tab over to the cleric and change the target. Usually I click on the tank but it doesn't matter what I click on. Once the target changes, the cleric recognizes that everyone's health is low and starts on a mad healing spree. If I do not change targets, the cleric will let us all die unless the mob dies which forces a target change (from targeted to not-targeted) and then heals start up.
yup 2 posts back i mentioned this.
until VV is patched if your cleric has a target, that isn't a player, its not going to heal unfortunately
Its fixed internally - but requires a VV rebuild for it to be live - one of the downsides of plugins in pre-release form
yes.
until the next built that's likely going to happen - just like mentioned in the last two responses.
yes, it will heal in mode 0 (but does not sit down, nor break invis).
its not the targetting the MA that stops it from healing currently, its having a target that isn't a player member.
should be sorted next build
- Joined
- Jun 14, 2017
- RedCents
- 1,962¢
Sic,
Just wanted to report that today after running the updater, MQ2Cleric is having a problem loading its spells. When it gets to Gem 4 it seems to have a conflict where it is trying to load "Divine Censure" and "Solemn Elixir" into that Gem. So it will load one then erase it then load the other and erase it and just continues swapping the two spells over and over. Background info, both spells I have are Rk 2, I'm on TLP, level 80 and I tried a few different modes (Manual, Assist, Chase and Vorpal). I also tried clearing all the gems before starting plugin to let it populate with a clean slate and all seemed to display the same problem. Hope this info helps, AnotherJohn
Just wanted to report that today after running the updater, MQ2Cleric is having a problem loading its spells. When it gets to Gem 4 it seems to have a conflict where it is trying to load "Divine Censure" and "Solemn Elixir" into that Gem. So it will load one then erase it then load the other and erase it and just continues swapping the two spells over and over. Background info, both spells I have are Rk 2, I'm on TLP, level 80 and I tried a few different modes (Manual, Assist, Chase and Vorpal). I also tried clearing all the gems before starting plugin to let it populate with a clean slate and all seemed to display the same problem. Hope this info helps, AnotherJohn
thanks will check it out - i see what the issue is
so for some people it doesn't appear that the patcher has the correct file - red's gonna look at it tonight, but i can attach one for now
to replace your current file you would /plugin mq2cleric unload ON ALL OF YOUR TOONS, then replace the file with this file and then /plugin mq2cleric load
I'll delete this once the file is updated correctly
- Joined
- Jun 14, 2017
- RedCents
- 1,962¢
Cool, I will give it a try when I log back in later. Thanks for what you do, AnotherJohn
Please note, a lot of good work was put into these plugins, but don’t let this make you lazy. I just fought a mob that was backed up to a ledge and both zerkers and my cleric happily jumped off trying to get behind the mob. Be smarter than me, maintain awareness! Lol. Cleric kept me healed swimming in the pit she fell into, and then auto rezzed the shaman I accidentally let drown so I’m happy overall.
dalalron
Member
- Joined
- Aug 3, 2019
- RedCents
- 110¢
Hi there. I am having the same problem as anotherjohn had but with spell gem 5 and aweflash vs elixir of expiation. It tries to load both and just goes around and around. Wont go past it to even load the other gems. I unloaded as suggested, deleted mq2cleric.dll and loaded the new one but no good. Will try logging out and back in now but any advice would be helpful. Thanks
the update i made for the anotherjohn issue i actually saw the same issue with gem5 so i put that fix in there too - should either be in the build red did tonight, or next build - in the meantime you will need to byos to make it stop (but i would run patcher first
Heals/Heals settings are mostly for lower lvl (or i guess BYOS) spells that are category Heals sub-category Heals --- so all the lower lvl heals are Heals/Heals like light healing, greater healing, and including thae later Light line of spells like "Sincere Light" and such
no elixirs are HoTs so they are under duration heals, but the group check i have a generic value set that isn't adjustable, but based on same logic as regular group healing, except it checks for needing the buff from the spell (which requires folks being in mq2kissbuffs etc)
Is there an option to not rez? We got murdered, spent time buffing up, getting back to where we were camped and now the cleric insists we all need resurrection, which means rebuffing, waiting for all the mana again.
There are definitely times when I want this to happen but today wasn’t one of them.
There are definitely times when I want this to happen but today wasn’t one of them.
no, not at this time. you can do the /decaycorpse eq thing or whatever it is if you dont want your corpse
First off, thanks for these awesome plugins! I really enjoy them, good work!
I am having the same problem, but with Aura of the Reverent. Reloading mq2kissbuffs does not help, and neither does clicking off the aura buff, or the aura itself. I have noticed that this does not happen in Plane of Knowledge or other zones where buff timers do not count down.
I am having the same problem, but with Aura of the Reverent. Reloading mq2kissbuffs does not help, and neither does clicking off the aura buff, or the aura itself. I have noticed that this does not happen in Plane of Knowledge or other zones where buff timers do not count down.
our aura check only checks if we don't have the buff from the aura - which means it is only going to cast it when we don't have it
I wonder if this is related to revaura being stupid with what buff it gives. Are you casting 1 aura or 2?
if rev is your first aura it is casting (like low lvl or missing stuff) i guess i could see how it might get tripped up --- will have a patch for that
Using this at low level on Rizlona and a couple questions came up:
1) it does not buff with courage. I assume this is not coded in yet because it is not necessarily aimed at low level?
2) is there a way to melee and nuke, but only have it nuke when mana is above a certain percentage? If not, can I have it melee, but not nuke?
1) it does not buff with courage. I assume this is not coded in yet because it is not necessarily aimed at low level?
2) is there a way to melee and nuke, but only have it nuke when mana is above a certain percentage? If not, can I have it melee, but not nuke?
we have some lower lvl stuff coming - this is in pre-release still so obviously not fleshed out for the unique demands of very low lvl and tlp situations
- Joined
- Dec 29, 2017
- RedCents
- 23,976¢
- Seller
- #317
Me and Sic have taken to a TLP for the slow grind at lower levels and a fresh start to really sink out teeth into how the plugins are acting at lower levels. Courage line was added and works well. Checking to see if we should try to rez was added, Lower level cures added, but require you manually memorize them as needed, auto summoning of food and drink if you're out of them, lots of adjustments to various things in this plugin as well as others. Looking forward to pushing through the monotony of these lower level adjustments and really fine tuning the plugin to be optimal at all level ranges, preped for next build.
Tried this out and I like the menu and all but the heals just aren't good enough. My max aa lvl 115 war with T3 tov armor and 3 pieces of ice encrusted is getting killed with 2 trash mobs while wielding a shield. I have no problems with 6 trash mobs when my cleric is using IHC. I left everything at the default. Cleric is healing but not well. Sometimes waiting until war is almost dead before casting a heal. Kind of worse than a merc at this point. What settings are people using to make this work well?
that sounds like something is very wrong. - you said you left everything as default so not sure about that. I usually do recommend folks turn off domelee, and curates if they won't want to use curates just due to how curates work - but the healing portion of it is very aggressive and responsive, and through multiple clerics (5+) doing Tbl/tov never had an experience like that