Plugin - MQ2Cleric (2 Viewers) 3.1.52471.11

[Gohast]

I'm not sure how much effort goes into the rebuilds but with all the server downtime it would be the perfect time!

( I'm just eager to use @ChatWithThisName plugins on Rizlona )

 

[Gohast]

MQ2Cleric doesn't seem to heal for some reason. Maybe I've jacked up the settings, I'll have to check if I can ever get back in lol.

 

[Sic]

MQ2Cleric doesn't seem to heal for some reason. Maybe I've jacked up the settings, I'll have to check if I can ever get back in lol.

correct. until VV is rebuilt heals/heals do not work which has been spoken about several times in the mq2cleric thread

(since it turns out you are talking specifically about and for mq2cleric i moved your post to the mq2cleric section).

 

[Sic]

MQ2Cleric doesn't seem to heal for some reason. Maybe I've jacked up the settings, I'll have to check if I can ever get back in lol.

and looks like redbot, like the madlad madbot he is, rebuilt for us tonight huzzah!

 

[Sic]

Heals/Heals is working again "and the villagers rejoiced... yay"

however, you will need to turn off domelee /clr domelee off until next update, as it won't swap target to heal if you're fighting something (yeah that is stupid lol, sorry)

 

[nolava]

Heals/Heals is working again "and the villagers rejoiced... yay"

however, you will need to turn off domelee /clr domelee off until next update, as it won't swap target to heal if you're fighting something (yeah that is stupid lol, sorry)

This caught me out this morning! Glad I saw this post as I could not figure out why I was getting no heals

 

[Nurd6]

After this recent update I'm seeing an odd issue. My Cleric is level 41 and I generally keep her on Mode 1 with DoMelee Off. What I'm seeing is when my SK brings a mob in, the cleric targets the mob and will not heal unless I alt-tab over to the cleric and change the target. Usually I click on the tank but it doesn't matter what I click on. Once the target changes, the cleric recognizes that everyone's health is low and starts on a mad healing spree. If I do not change targets, the cleric will let us all die unless the mob dies which forces a target change (from targeted to not-targeted) and then heals start up.

 

[Sic]

After this recent update I'm seeing an odd issue. My Cleric is level 41 and I generally keep her on Mode 1 with DoMelee Off. What I'm seeing is when my SK brings a mob in, the cleric targets the mob and will not heal unless I alt-tab over to the cleric and change the target. Usually I click on the tank but it doesn't matter what I click on. Once the target changes, the cleric recognizes that everyone's health is low and starts on a mad healing spree. If I do not change targets, the cleric will let us all die unless the mob dies which forces a target change (from targeted to not-targeted) and then heals start up.

yup 2 posts back i mentioned this.

until VV is patched if your cleric has a target, that isn't a player, its not going to heal unfortunately



Its fixed internally - but requires a VV rebuild for it to be live - one of the downsides of plugins in pre-release form

 

[Nurd6]

I understand now, I read that as "domelee off stops this from happening" If I run in mode 0 will MQ2Cleric heal? That should stop it from auto-targeting the MA target, I think.

 

[jsantoli]

My cleric is getting stuck with my mage pet. once he gets him on target he wont switch to my SK

 

[Sic]

My cleric is getting stuck with my mage pet. once he gets him on target he wont switch to my SK

yes.
until the next built that's likely going to happen - just like mentioned in the last two responses.

 

[Sic]

I understand now, I read that as "domelee off stops this from happening" If I run in mode 0 will MQ2Cleric heal? That should stop it from auto-targeting the MA target, I think.

yes, it will heal in mode 0 (but does not sit down, nor break invis).
its not the targetting the MA that stops it from healing currently, its having a target that isn't a player member.


should be sorted next build

 

[Sic]

Can run the patcher and this is now fixed =D

 

[Gohast]

 

[AnotherJohn]

Sic,
Just wanted to report that today after running the updater, MQ2Cleric is having a problem loading its spells. When it gets to Gem 4 it seems to have a conflict where it is trying to load "Divine Censure" and "Solemn Elixir" into that Gem. So it will load one then erase it then load the other and erase it and just continues swapping the two spells over and over. Background info, both spells I have are Rk 2, I'm on TLP, level 80 and I tried a few different modes (Manual, Assist, Chase and Vorpal). I also tried clearing all the gems before starting plugin to let it populate with a clean slate and all seemed to display the same problem. Hope this info helps, AnotherJohn

 

[Sic]

Sic,
Just wanted to report that today after running the updater, MQ2Cleric is having a problem loading its spells. When it gets to Gem 4 it seems to have a conflict where it is trying to load "Divine Censure" and "Solemn Elixir" into that Gem. So it will load one then erase it then load the other and erase it and just continues swapping the two spells over and over. Background info, both spells I have are Rk 2, I'm on TLP, level 80 and I tried a few different modes (Manual, Assist, Chase and Vorpal). I also tried clearing all the gems before starting plugin to let it populate with a clean slate and all seemed to display the same problem. Hope this info helps, AnotherJohn

thanks will check it out - i see what the issue is

 

[Sic]

Can run the patcher and this is now fixed =D

so for some people it doesn't appear that the patcher has the correct file - red's gonna look at it tonight, but i can attach one for now

to replace your current file you would /plugin mq2cleric unload ON ALL OF YOUR TOONS, then replace the file with this file and then /plugin mq2cleric load

I'll delete this once the file is updated correctly

 

[AnotherJohn]

Cool, I will give it a try when I log back in later. Thanks for what you do, AnotherJohn

 

[Nurd6]

Please note, a lot of good work was put into these plugins, but don’t let this make you lazy. I just fought a mob that was backed up to a ledge and both zerkers and my cleric happily jumped off trying to get behind the mob. Be smarter than me, maintain awareness! Lol. Cleric kept me healed swimming in the pit she fell into, and then auto rezzed the shaman I accidentally let drown so I’m happy overall.

 

[dalalron]

Hi there. I am having the same problem as anotherjohn had but with spell gem 5 and aweflash vs elixir of expiation. It tries to load both and just goes around and around. Wont go past it to even load the other gems. I unloaded as suggested, deleted mq2cleric.dll and loaded the new one but no good. Will try logging out and back in now but any advice would be helpful. Thanks

 

[Sic]

Hi there. I am having the same problem as anotherjohn had but with spell gem 5 and aweflash vs elixir of expiation. It tries to load both and just goes around and around. Wont go past it to even load the other gems. I unloaded as suggested, deleted mq2cleric.dll and loaded the new one but no good. Will try logging out and back in now but any advice would be helpful. Thanks

the update i made for the anotherjohn issue i actually saw the same issue with gem5 so i put that fix in there too - should either be in the build red did tonight, or next build - in the meantime you will need to byos to make it stop (but i would run patcher first

 

[ABDon]

Apologies if I'm missing something obvious, but.... what are the "HealsHeals" settings that have appeared recently please?

 

[Sic]

Apologies if I'm missing something obvious, but.... what are the "HealsHeals" settings that have appeared recently please?

Heals/Heals settings are mostly for lower lvl (or i guess BYOS) spells that are category Heals sub-category Heals --- so all the lower lvl heals are Heals/Heals like light healing, greater healing, and including thae later Light line of spells like "Sincere Light" and such

 

[ABDon]

Ahh gotcha, does that cover the Group Elixirs too? never been able to get those to work before

 

[Sic]

Ahh gotcha, does that cover the Group Elixirs too? never been able to get those to work before

no elixirs are HoTs so they are under duration heals, but the group check i have a generic value set that isn't adjustable, but based on same logic as regular group healing, except it checks for needing the buff from the spell (which requires folks being in mq2kissbuffs etc)

 

[Nurd6]

Is there an option to not rez? We got murdered, spent time buffing up, getting back to where we were camped and now the cleric insists we all need resurrection, which means rebuffing, waiting for all the mana again.
There are definitely times when I want this to happen but today wasn’t one of them.

 

[Sic]

Is there an option to not rez? We got murdered, spent time buffing up, getting back to where we were camped and now the cleric insists we all need resurrection, which means rebuffing, waiting for all the mana again.
There are definitely times when I want this to happen but today wasn’t one of them.

no, not at this time. you can do the /decaycorpse eq thing or whatever it is if you dont want your corpse

 

[Sic]

But i'll add one for next update - there are definitely times you just want to hold off on rezzing

 

[Sidien]

Not 100% sure, but I think /hidecorpse would make the plugin not see the corpse, and thus not try to rez it until you make it visible.

 

[Sidien]

First off, thanks for these awesome plugins! I really enjoy them, good work!

I looked around and didn't see this mentioned (might have missed it though) but my cleric is chain casting Aura of Loyalty on my character when all of them have it blocked. It doesn't stop her form healing when needed it is just annoying to see her chain casting the same spell over and over.

I am having the same problem, but with Aura of the Reverent. Reloading mq2kissbuffs does not help, and neither does clicking off the aura buff, or the aura itself. I have noticed that this does not happen in Plane of Knowledge or other zones where buff timers do not count down.

 

[Sic]

First off, thanks for these awesome plugins! I really enjoy them, good work!



I am having the same problem, but with Aura of the Reverent. Reloading mq2kissbuffs does not help, and neither does clicking off the aura buff, or the aura itself. I have noticed that this does not happen in Plane of Knowledge or other zones where buff timers do not count down.

our aura check only checks if we don't have the buff from the aura - which means it is only going to cast it when we don't have it

I wonder if this is related to revaura being stupid with what buff it gives. Are you casting 1 aura or 2?

if rev is your first aura it is casting (like low lvl or missing stuff) i guess i could see how it might get tripped up --- will have a patch for that

 

[Sidien]

our aura check only checks if we don't have the buff from the aura - which means it is only going to cast it when we don't have it

I wonder if this is related to revaura being stupid with what buff it gives. Are you casting 1 aura or 2?

if rev is your first aura it is casting (like low lvl or missing stuff) i guess i could see how it might get tripped up --- will have a patch for that

Thanks for quick response!

I didn't have any other auras active on the cleric, so I this is the first aura being cast. After scribing Aura of Divinity, it seems to behave as expected. Thanks again!

 

[Jalerian]

Using this at low level on Rizlona and a couple questions came up:
1) it does not buff with courage. I assume this is not coded in yet because it is not necessarily aimed at low level?
2) is there a way to melee and nuke, but only have it nuke when mana is above a certain percentage? If not, can I have it melee, but not nuke?

 

[Sic]

Using this at low level on Rizlona and a couple questions came up:
1) it does not buff with courage. I assume this is not coded in yet because it is not necessarily aimed at low level?
2) is there a way to melee and nuke, but only have it nuke when mana is above a certain percentage? If not, can I have it melee, but not nuke?

we have some lower lvl stuff coming - this is in pre-release still so obviously not fleshed out for the unique demands of very low lvl and tlp situations

 

[Gohast]

In the mean time a normal Kiss macro is pretty easy to setup and you can set all of the things you listed.

 

[stig7055]

But i'll add one for next update - there are definitely times you just want to hold off on rezzing

Really looking forward to this, I've had to fight back into a hostile camp spot after several wipes and dealing with the mandatory rezing while fighting has not been too fun. Pause Rezing will be great!

 

[ChatWithThisName]

Me and Sic have taken to a TLP for the slow grind at lower levels and a fresh start to really sink out teeth into how the plugins are acting at lower levels. Courage line was added and works well. Checking to see if we should try to rez was added, Lower level cures added, but require you manually memorize them as needed, auto summoning of food and drink if you're out of them, lots of adjustments to various things in this plugin as well as others. Looking forward to pushing through the monotony of these lower level adjustments and really fine tuning the plugin to be optimal at all level ranges, preped for next build.

 

[Nurd6]

On Rizlona (only here) my level 2 cleric will not chase and will not domelee unless I initiate combat manually.
It’s grouped with an enchanter who I have set as MT, MA, and Puller for testing purposes.

 

[Saffron]

Tried this out and I like the menu and all but the heals just aren't good enough. My max aa lvl 115 war with T3 tov armor and 3 pieces of ice encrusted is getting killed with 2 trash mobs while wielding a shield. I have no problems with 6 trash mobs when my cleric is using IHC. I left everything at the default. Cleric is healing but not well. Sometimes waiting until war is almost dead before casting a heal. Kind of worse than a merc at this point. What settings are people using to make this work well?

 

[Sic]

Tried this out and I like the menu and all but the heals just aren't good enough. My max aa lvl 115 war with T3 tov armor and 3 pieces of ice encrusted is getting killed with 2 trash mobs while wielding a shield. I have no problems with 6 trash mobs when my cleric is using IHC. I left everything at the default. Cleric is healing but not well. Sometimes waiting until war is almost dead before casting a heal. Kind of worse than a merc at this point. What settings are people using to make this work well?

that sounds like something is very wrong. - you said you left everything as default so not sure about that. I usually do recommend folks turn off domelee, and curates if they won't want to use curates just due to how curates work - but the healing portion of it is very aggressive and responsive, and through multiple clerics (5+) doing Tbl/tov never had an experience like that