• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Problem - Crashing when I did the most recent update.

why does everybody hate me.

copy the text from the window and paste it instead of posting a screenshot. I can't select text in a screenshot you sillies.

edit: looks like that crash didn't get reported anyways, probably because you hit the limit of crash report submissions for the time period. Crash occurred in MQ2War anyways, its a plugin issue, go post about it in the cwtn forum.
 
brainiac said:
why does everybody hate me.

copy the text from the window and paste it instead of posting a screenshot. I can't select text in a screenshot you sillies.

edit: looks like that crash didn't get reported anyways, probably because you hit the limit of crash report submissions for the time period. Crash occurred in MQ2War anyways, its a plugin issue, go post about it in the cwtn forum.
Click to expand...
---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 7336
Version: 3.1.1.2920
Location: APIWriteOut+0 (C:\RedGuides\Plugins\MQ2Cleric.DLL+00000000000C6430)

CrashID: 675f624c-a504-45fe-a26c-120f18910cb5

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------
 
Having any of the CWTN plugins causes it to crash. If you delete the CWTN plugins (DLLs from the plugin directory) it works again.

S
 
Merry Christmas to All!

Hope this is the right place for this. I just started experiencing continuous crashes when attempting to load my crew. It appears to be an issue with MQWar, even though I'm not loading that character.

Here is the crash message I keep getting:

---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 23296
Version: 3.1.1.2920
Location: APIWriteOut+0 (C:\Users\bob\AppData\Local\VeryVanilla\MacroQuest\Release\Plugins\MQ2War.DLL+00000000000C57F0)

CrashID: dffea5ce-1237-4df9-bc73-851e2fa32aa4

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------

Fixing this is beyond me. I buy CWTN plugins and just rely on them working.

My MQWar subscription is good until July 25th 2025.

Appreciate your help getting this resolved.

Thanks,

Dysanor
 
It seems to be doing that with every CWTN plugins. The only 'fix' I've found is to rollback to the Dec 17th version of MQ2 and CWTN plugins.
 
Well hmm - since this update I get this error. I uninstalled and reinstalled everything and still:

---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 4116
Version: 3.1.1.2920
Location: APIWriteOut+0 (Y:\macroquest\Plugins\MQ2Shaman.DLL+00000000000C65B0)

CrashID: 9ec00efa-d3ad-47d8-9b8c-ebdfa30bb924

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------

As long as I keep the shaman plugin out the rest works fine:
 
Same here. Just started with latest update to commons.

---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 36804
Version: 3.1.1.2920
Location: APIWriteOut+0 (C:\Users\EQ\AppData\Local\VeryVanilla\MacroQuest\Release\Plugins\mq2war.DLL+00000000000C57F0)

CrashID: 650c0b34-4189-4f3e-bea6-3cc13f38a7d6

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------
 
Yeah I'm getting the same crash on startup, although mine effects the other cwtn plugins too (tried deleting the mq2shaman.dll but then it just crashes because of the SK one). I'm sure it'll get fixed soon!

Edit: I *think* you can just download the previous version of the dll file from the "History" tab and replace it, should work.
 
WillardJ85 said:
Yeah I'm getting the same crash on startup, although mine effects the other cwtn plugins too (tried deleting the mq2shaman.dll but then it just crashes because of the SK one). I'm sure it'll get fixed soon!

Edit: I *think* you can just download the previous version of the dll file from the "History" tab and replace it, should work.
Click to expand...
So worked! Thank you!
 
Reporting the same error here, haven't tried to redownload the previous version yet (will do it later, thanks @WillardJ85 for suggesting a solution :))

---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 23152
Version: 3.1.1.2920
Location: APIWriteOut+0 (C:\Users\<redacted>\AppData\Local\VeryVanilla\MacroQuest\Release\Plugins\mq2shaman.DLL+00000000000C65B0)

CrashID: c6ee9ce7-1741-41a0-9e80-fe205c19338c

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------
Click to expand...
 
macroquest caught a crash

process ID 10588
Version 3.1.1.2920
Location apiwriteout+0
C:users joe next plugins mq2rogue dll=000000000000c58d0
crashid: d5621b48 8729 48c2 a8a5 caa51b7d7a35


blah blah blah at end

tks merry christmas to all
 
Same here

MacroQuest caught a crash:

Process ID: 13020
Version: 3.1.1.2920
Location: APIWriteOut+0 (G:\Next\Plugins\mq2shaman.DLL+00000000000C65B0)

CrashID: 36b41aee-d0e2-4a92-9145-aef1490bb555
 
Just today, I started having an error on startup that appears to be associated with M2Q Necro. I tried opening up the dump file but it's just a massive log that I can make heads from tails with. Nothing changed since I last played other than it looks like there was an MQ update last night (that I applied this morning). Any ideas?

---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 5504
Version: 3.1.1.2920
Location: APIWriteOut+0 (C:\Users\ojizo\AppData\Local\VeryVanilla\MacroQuest\Release\Plugins\MQ2Necro.DLL+00000000000C6470)

CrashID: d3c2b648-c97d-498e-aaa2-995e86ca8ba0

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------
 
I am rebuilding with a fix.

thank you for your patience.

Once you see that RG is rebuilt, please patch

please check > here < to see if RG is patched. if you don't see a patch after midnight est, then it isn't posted yet.
 
Wrong forum
Merry Christmas! Sorry for the hassle, but. I've checked my licenses, it's good until July 25. I can log in without MQ. I have reloaded the launcher, reloaded the plugin. Same crash message. Everything was great yesterday.


---------------------------
EverQuest Crash Detected
---------------------------
MacroQuest caught a crash:

Process ID: 25160
Version: 3.1.1.2920
Location: APIWriteOut+0 (D:\Users\irshm\AppData\Local\VeryVanilla\MacroQuest\Release\Plugins\mq2war.DLL+00000000000C57F0)

CrashID: 7871fd5a-231c-4ec5-986f-89a8f2f505f9

You can either:
* [RETRY] Continue execution and hope for the best.
* [CANCEL] Write a crash dump and terminate EverQuest.

Copy the contents of this dialog to your clipboard by pressing Ctrl+C

---------------------------
Retry Cancel
---------------------------
 
the patch has been posted.

Please make sure you patch.

I'm spending a lot of this morning replying to PMs/DMs with the link to this thread, which says to update, and then still getting "im crashing from updating" while running the build that was crashing, which is now updated.

Please update. <3
 
Current live build is 2922 if you're not on 2922 for live build, you should update.
 
Patched this morning based on the crashing reports and seems to have broken then. Updating any values in the UI / via slash command is not updating the data types. Screen shots below where I paused and unpaused, yet ${CWTN.Paused} stayed static as False, and also changed modes but ${CWTN.Mode} never updates. It's not specific to a particular plugin. I've tested rogue, shaman, cleric and monk and they're all exhibiting the same behavior across multiple PCs.


1735142925488.png1735142815780.png
 
Niz said:
Patched this morning based on the crashing reports and seems to have broken then. Updating any values in the UI / via slash command is not updating the data types. Screen shots below where I paused and unpaused, yet ${CWTN.Paused} stayed static as False, and also changed modes but ${CWTN.Mode} never updates. It's not specific to a particular plugin. I've tested rogue, shaman, cleric and monk and they're all exhibiting the same behavior across multiple PCs.


View attachment 67443View attachment 67442
Click to expand...
Thanks. I'll take a look at it tomorrow.

The cwtn type stuff was crashing today, which I stopped, and the types I checked all were updating as expected, but I'll take a look tomorrow
 
Sic said:
Thanks. I'll take a look at it tomorrow.

The cwtn type stuff was crashing today, which I stopped, and the types I checked all were updating as expected, but I'll take a look tomorrow
Click to expand...
Thanks bud! Hope you have a wonderful Christmas!
 
Did the last update bork the CWTN.Paused status? Boxhud is no longer showing true and neither is an echo unless I am doing something wrong.

1735163287364.png
 
Psy said:
Did the last update bork the CWTN.Paused status? Boxhud is no longer showing true and neither is an echo unless I am doing something wrong.

View attachment 67447
Click to expand...
Sic said:
Thanks. I'll take a look at it tomorrow.

The cwtn type stuff was crashing today, which I stopped, and the types I checked all were updating as expected, but I'll take a look tomorrow
Click to expand...
 
My bad, sorry. Didn't think to look back in the thread for that. Won't do that again!
 
Psy said:
My bad, sorry. Didn't think to look back in the thread for that. Won't do that again!
Click to expand...
well this thread title doesn't match, which is why i left a 3 day redirect on the other thread that comes in here called "CWTN Datatypes Not Updating" :p
1735165151552.png

so very annoying when everything works for me as expected
1735165830695.png
 
@Psy thank you so much for your time this evening. I appreciate it very much.

With Psy's help and being able to talk-it-out to replicate the scenario that was happening, I was able to determine the issue, and hopefully have a final update for this crash -> more crash -> no crash but also no CWTN.Stuff
 
You must log in or register to reply here.
Problem - Crashing when I did the most recent update.
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -