• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Problem - Bard / monk puller Ignores named Mobs and does not pull them

M

matthinson

Level 2
Joined
Sep 20, 2015
RedCents
324¢
Version of KissAssist.mac?
12.002
When did your problem start?
always
Character Role?
  1. Puller
What class is having this issue?
  1. Bard
How often does this issue occur?
Always
Can you reproduce the issue?
by running the kissassist macro and having bard set as puller.
So ive tried on my bard and monk and have the same issue. (by bard I mean all 3 bards cuz i got 3 groups I run),
And No matter the zone, area, how open my camp radius is, or how high my Z/x radius is, the mob can be 10 feet away from me and the bard goes and pulls trash 50+ meters away. And after clearing ALL the trash in kill radius, it still DOSENT pull the named, And the name is NOT on my ignore list.

Any suggestions/ideas? Also Ini:

[Pull]
PullWith=Sonic Disturbance
PullMeleeStick=0
MaxRadius=1200
MaxZRange=400
UseWayPointZ=0
PullWait=0
PullRadiusToUse=100
PullRoleToggle=0
ChainPull=1
ChainPullHP=100
PullPause=20|2
PullLevel=110|140
PullArcWidth=0
PullTwistOn=1
pullstwist=1 2 3 4 5 6 7 8 9 10
PullOnReturn=1
[PullAdvanced]
PullLocsOn=0
 
Sort by date Sort by votes
Whenever I've had this problem, it's been my PullLevel setting. You don't say what level you are, but are the nameds you're trying to pull between 110 and 140?
 
Upvote 0 Downvote
PullArcWidth00-360The width in degrees on the compass. See /setpullarc in the command section.
your is set to 0 - i would set it to 360 and see what happens

its strange that the named dont get pulled
 
Upvote 0 Downvote
stvski said:
PullArcWidth00-360The width in degrees on the compass. See /setpullarc in the command section.
your is set to 0 - i would set it to 360 and see what happens

its strange that the named dont get pulled
Click to expand...
Ill try that here in a few, it pulls just fine tho just 100% skips named. Can be no mobs in range except for the named and still doesn't pull the named.
 
Upvote 0 Downvote
Most likely it is the kissassist_info file. Check it and make sure there isn't any weird values in the mobs to pull or mobs to ignore. Second, make sure there isn't anything using /alert, especially 3 I think as it is the list of things to ignore for kissassist.
 
Upvote 0 Downvote
It could also be that you have one of your XTarget entries manually declared to something other than autohater. The puller will NOT pull a named if the puller thinks there is a mob in camp. Try this when the puller will not pull the named and KA is running on your puller. Use the /aggroinfo command.
 
Upvote 0 Downvote
ctaylor22 said:
It could also be that you have one of your XTarget entries manually declared to something other than autohater. The puller will NOT pull a named if the puller thinks there is a mob in camp. Try this when the puller will not pull the named and KA is running on your puller. Use the /aggroinfo command.
Click to expand...
Nothing on all 4 bards + monks Xtargets set, all are set to autohate. I just checked that aswell.
 
Upvote 0 Downvote
bytebite said:
Most likely it is the kissassist_info file. Check it and make sure there isn't any weird values in the mobs to pull or mobs to ignore. Second, make sure there isn't anything using /alert, especially 3 I think as it is the list of things to ignore for kissassist.
Click to expand...
So i've tried it two different ways, this is way 1 (default load of kissassist info file.. minus the mobs to ignore obviously that I added)

[Laurion Inn]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL

AAMezImmune=0
MobsToPull=List up to 25 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or ALL for all mobs
MobsToIgnore=a badger,a shark,a white shark,a rabbit, a doe, a stinker, a wolf, a ghost, a blood bat
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.
PullLocsHelp=Y,X|Range. Ignore mobs in this area
PullLocs1=0
PullLocs2=0
PullLocs3=0
PullLocs4=0
PullLocs5=0

way 2: (same thing except for I changed it to ALL instead of the default words)
[Laurion Inn]
MezImmune=List up to 10 mobs. Use full names i.e. a green snake,a blue tiger,a wide eye ooze or NULL
AAMezImmune=0
MobsToPull=ALL
MobsToIgnore=a badger,a shark,a white shark,a rabbit, a doe, a stinker, a wolf, a ghost, a blood bat
MobsToBurn=List up to 10 mobs. Use full names i.e. Beget Cube,Helias,Raze or NULL
PullPath=Place holder for path file. Not yet impletmented.
PullLocsHelp=Y,X|Range. Ignore mobs in this area
PullLocs1=0
PullLocs2=0
PullLocs3=0
PullLocs4=0
PullLocs5=0


Both ways, it will literally pull every mob in camp and skip over the named.

Also, I even checked my Xtargets and they are all empty before I made this post in case that was the issue, and it's not.
 
Upvote 0 Downvote
Can you try running while mac is running /alert list 1

This should output things it is ignoring.

For example I ran test after ignoring something manually I see this:

Code: 
> /alert list 1
Current alerts:
[0] (0-200) any whose name exactly matches #nameherelowercase
1 alerts listed.

There is also the debug pull command. Try /debug pull on 1 I think. /debug help has some more options to test it out. It'll be a lot of info but it should tell you why it is ignoring them.
 
Upvote 0 Downvote
You must log in or register to reply here.
Problem - Bard / monk puller Ignores named Mobs and does not pull them
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -