• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
Resource icon

Release XGen-Shaman (legacy) 2.2.9.6

No permission to download
Join us with Level 2 access RedCents
Overview Commands Instructions F.A.Q. Updates (39) Reviews (5) History Discussion
Cannot get it to load. I've included a screenshot of the error I'm encountering.
 

Attachments

  • Annotation 2020-06-07 134405.png
    Annotation 2020-06-07 134405.png
    6.3 KB · Views: 17
So far, I'm loving X-Gen Shammy a lot. Great work!

The one thing I was thinking through was Talisman of the Sabretooth in the BigCat spell line. I have a 110 SHM that's F2P, and haven't invested in the expansions for, so Dissident Roar (106) is unavailable to it. The next option is this line in the macro is Talisman of the Leopard (101). You've skipped Talisman of the Sabretooth (106).

I've tried throwing this into the variable list, but he still doesn't cast it, but I'm no programmer for sure, so I thought I'd throw out the thought. It might be good for those who are F2P or haven't bought expansions for all their toons.

Not a complaint, just a suggestion. I'd have offered you my suggested code, if I knew how to code.

Thanks again for all this great work!
 
bigafro said:
So far, I'm loving X-Gen Shammy a lot. Great work!

The one thing I was thinking through was Talisman of the Sabretooth in the BigCat spell line. I have a 110 SHM that's F2P, and haven't invested in the expansions for, so Dissident Roar (106) is unavailable to it. The next option is this line in the macro is Talisman of the Leopard (101). You've skipped Talisman of the Sabretooth (106).

I've tried throwing this into the variable list, but he still doesn't cast it, but I'm no programmer for sure, so I thought I'd throw out the thought. It might be good for those who are F2P or haven't bought expansions for all their toons.

Not a complaint, just a suggestion. I'd have offered you my suggested code, if I knew how to code.

Thanks again for all this great work!
Click to expand...

Isnt Roar of the Lion (TBM Dicho) better than Talisman of the Sabretooth?
 
bigafro said:
So far, I'm loving X-Gen Shammy a lot. Great work!

The one thing I was thinking through was Talisman of the Sabretooth in the BigCat spell line. I have a 110 SHM that's F2P, and haven't invested in the expansions for, so Dissident Roar (106) is unavailable to it. The next option is this line in the macro is Talisman of the Leopard (101). You've skipped Talisman of the Sabretooth (106).

I've tried throwing this into the variable list, but he still doesn't cast it, but I'm no programmer for sure, so I thought I'd throw out the thought. It might be good for those who are F2P or haven't bought expansions for all their toons.

Not a complaint, just a suggestion. I'd have offered you my suggested code, if I knew how to code.

Thanks again for all this great work!
Click to expand...

Made a change for you. Uploading latest update with it. You will need to /cc updatedb after downloading. This is UNTESTED on the spell. let me know.
 
disclosed said:
Cannot get it to load. I've included a screenshot of the error I'm encountering.
Click to expand...
If i had to guess your starting it wrong. type /mac \xgen\xgen-shaman 250 90 the 250 represents the range (distance a PC can be from you) the 90 represents at what HP % you should heal them at.

By looking at your SS i see you have typed text where 200 should be. Param0 is the Range.
 
I really should change to Roar of the Lion is better than sabretooth.
Sabretooth Maw

Not a player spell: Clicky, NPC spell, Proc, etc.​
Slot 1:Decrease Current Hit Points by 2226
Vs.
Roar of the Lion 1

Shaman (250)​
Slot 1:Increase Current Hit Points by 6434 per tick
Slot 5:Add Proc: Lion's Roar 1 with 400% Rate Mod

Lion's Roar 1

Not a player spell: Clicky, NPC spell, Proc, etc.​
Slot 1:Decrease Current Hit Points by 13265
 
Kritzs said:
CONSTANTLY CASTING TALA TAK OVER AND OVER AND OVER
Click to expand...
Set MT and MA. Verify you have the buff on you and its still casting. Verify you do not have the buff blocked. Stop the macro manually cast Lupine Spirit. See if there is a message as to why its not landing.

Also your shamans Level please.

Thank you.

Also Sending you a PM.
 
Last edited:
I keep getting spamed with MQ2 Canni`ing when i run this. Followed the instructions on how to set it. I have very little knowledge about EQ so not sure what Canni'ing means. I'm playing on live rizlona if that helps.
 
Tankerjoe01 said:
I keep getting spamed with MQ2 Canni`ing when i run this. Followed the instructions on how to set it. I have very little knowledge about EQ so not sure what Canni'ing means. I'm playing on live rizlona if that helps.
Click to expand...
I think the title of this macro should of been enough....but, this is for lvl 85+ shamans
 
Aipoc76 updated XGen-Shaman (aka shammyhealer.mac 2.0 ) 85+ with a new update entry:

Shaman Goin HAM!! Chain Casting INC!

Update 2.2.7: Added a feature of a non-stop single target chain heal Works like the original shamanhealer.mac. To enable this /cc chainheal. It does NOT swap targets. It will pause when OOC and will not pre-nuke targets. Fixed Missing Tala`Tak Stack Check for Spirit of Falcon. Re-fixed, my accidental unfix for a fix for broken rezes. Hell even im lost at this point. Mr. Fluffy has been given permission to attack sooner, so that he...
Click to expand...

Read the rest of this update entry...
 
Last edited:
Aipoc76 updated XGen-Shaman (aka shammyhealer.mac 2.0 ) 85+ with a new update entry:

You have become better at identifying Tala'Tak issues <2>

Update 2.2.8 Fixed Tala'Tak again. Actually identified the spam issue, it has a range of 50. Who would of thunk it. Updated DanNet observers to properly reset when a toon dies or zones or joins the grp ect. Will not randomly spam buffs on the group now. Corrected a Debuffing issue. Added WinTitle for Identification (I swear i didn't steal from KISS) someone gave it to me!!!.
Click to expand...

Read the rest of this update entry...
 
*blinks innocently* Imitation is the sincerest form of flattery ;) I recently found out Aipoc76 is local can't wait to have dinner with him :) damn COVID-19
 
sl968 said:
*blinks innocently* Imitation is the sincerest form of flattery ;) I recently found out Aipoc76 is local can't wait to have dinner with him :) damn COVID-19
Click to expand...
Yep, Haven't seen the inside of a restaurant in 4 months. Lookin forward to it.
 
I am aware of a issue with Alliance spam casting, working on a fix, may be a day or so. Sorry for the inconvenience. Until i can work it out with Dannuic, i'm unsure why its doing what its doing, it shouldn't be. Dannet is reporting the spell properly, the check is just being ignored.
 
The shaman has started spam casting AA Lupine Spirit. It puts Spirit of Tala'Tak on the player. I have clicked off the buffs on all my toons and let the shaman recast it himself, and he is still spamming it. I know you were having some issues with it before IIRC, but I think the issue may have come back.
 
Aipoc76 said:
i have no issues, see if this is any different.
Click to expand...
This one did not work, it still spammed it a few times. However, I ended the mac and restarted it, and then it worked after that. Not sure if there may have been a hiccup on dannet causing an issue or not.
 
Aipoc76 updated XGen-Shaman (aka shammyhealer.mac 2.0 ) 85+ with a new update entry:

Fix for /cc follow and debuff issue

Update 2.2.9.2 Added Erogo's Curse 110 spell in dot1 line. Fixed Targeting spam (a different one now). Reworked when following tank was checked. It moves much better now. Adjusted slow and mallow code a tad. Pretty damn reliable! Hud is set to load in LIVE once again so /cc loadhud is back! Testing over in other version (for HUD load that is)!
Click to expand...

Read the rest of this update entry...
 
Not sure how hard of a change this would be, but I have noticed when I type /cc follow off, and I forget I already turned it off, it's turning it on. Is there a way to make the command work with /cc follow on and /cc follow off?
 
TVCChiver said:
Not sure how hard of a change this would be, but I have noticed when I type /cc follow off, and I forget I already turned it off, it's turning it on. Is there a way to make the command work with /cc follow on and /cc follow off?
Click to expand...
its a toggle switch and its shown on the hud. 1594351342558.png

having said that, you can make your own hotkeys for on and off. /varset Follow1 0 = OFF and /varset Follow1 1 = ON
 
Getting this error:

1594352311931.png

dbgenerate.inc is definitely in my Macro folder, with the exact spelling as in the error.
 
Is this the Shammy macro that when it originally posted included screenshots of it fuckin KILLIN the healing parse on a raid?
 
tried to use this last night. it will only use spell slots 1-7. am i doing something wrong? using the makebutton xgen-shammy button to start the macro. Also /cc loadhud does nothing, mq2hud is loaded. Any thoughts would be appreciated. Cheers
 
You must log in or register to reply here.
Release XGen-Shaman (legacy)
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -