• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Very Vanilla Compile 20120115c

Updating Files

I have the files in a run directory on my server where my boxes can access it. I just copy the new .dll files to the old directory. For several years this has worked like a charm.
 
Well, I used the old folder that MQ2 used to be in and just updated the .dll's and now everything seems to work fine. Thanks for all the help!!
 
bah, mq2melee doesn't seem to have an ini file, but I will post the kissassist file

[General]
KissAssistVer=4.0
Role=Assist
CampRadius=50
CampRadiusExceed=400
ReturnToCamp=1
ChaseAssist=0
ChaseDistance=25
MedOn=1
MedStart=20
MedCombat=0
LootOn=0
RezAcceptOn=1
AcceptInvitesOn=1
GroupWatchOn=1
EQBCOn=0
[Buffs]
BuffsOn=1
Buffs1=Elaborate Band of the Devoted|Taelosian Guard
Buffs2=Worn Pauldrons of the Clicknar Scout|Form of Defense VIII
Buffs3=Darsia's Cloak|Illusionary Spikes III
Buffs4=Star of the Seer|Might of Stone III
Buffs5=NULL
Buffs6=NULL
Buffs7=NULL
Buffs8=NULL
Buffs9=NULL
Buffs10=NULL
Buffs11=NULL
Buffs12=NULL
Buffs13=NULL
Buffs14=NULL
Buffs15=NULL
Buffs16=NULL
Buffs17=NULL
Buffs18=NULL
Buffs19=NULL
Buffs20=NULL
[Melee]
AssistAt=100
MeleeOn=1
FaceMobOn=1
MeleeDistance=75
StickHow=snaproll
AutoFireOn=0
[DPS]
DPSOn=1
DPSSkip=20
DPSInterval=2
DPS1=Scoff Rk. II
DPS2=Taunt
DPS3=NULL
DPS4=NULL
DPS5=NULL
DPS6=NULL
DPS7=NULL
DPS8=NULL
DPS9=NULL
DPS10=NULL
[Heals]
Help=Format Spell|% to heal at i.e. Devout Light Rk. II|50
HealsOn=0
Heals1=NULL
Heals2=NULL
Heals3=NULL
Heals4=NULL
Heals5=NULL
Heals6=NULL
Heals7=NULL
Heals8=NULL
Heals9=NULL
Heals10=NULL
[Burn]
BurnText=Decepticons Attack
Burn1=NULL
Burn2=NULL
Burn3=NULL
Burn4=NULL
Burn5=NULL
Burn6=NULL
[Pull]
PullWith=Melee
MaxRadius=350
MaxZRange=50
LoSFailOn=0
[AFKTools]
AFKToolsOn=0
AFKGMAction=/quit
AFKPCRadius=150
[Merc]
Help=To use: Turn off Auto Assist in Manage Mercenary Window
MercOn=0
MercAssistAt=92
 
Here is the melee file
[MQ2Melee]
aggro=1
bash=1
callchallenge=1
commanding=20
defense=20
disarm=1
enrage=1
facing=1
fieldarm=20
gutpunch=1
infuriate=1
kick=1
kneestrike=1
melee=1
opportunisticstrike=20
plugin=1
pothealover=0
provoke1=25046
provokeend=20
provokemax=1
provokeonce=1
resume=20
slam=1
stickbreak=1
stickrange=75
taunt=1
version=5.020
 
Your buffs are listed incorrectly. Just list the item for the clickys. See if that solves your crashing.

Rich (BB code): 
Buffs1=Elaborate Band of the Devoted
Buffs2=Worn Pauldrons of the Clicknar Scout
Buffs3=Darsia's Cloak
Buffs4=Star of the Seer
 
Thx to who ever got my map working :) also is there anyway i can filter the map so i can see PoK books and zone entrance names?
 
Blacked out chats/menu's etc. BAD!

I'm having a weird issue here. I zone into City of Bronze or Pillars of Alaris and my chat windows black out once I say something, and this affects my spell bar menu, any text tab on a UI window, etc. I can't do anything. I tried deleting entire zone files then patching and loaded into EQ with no MQ running and there was no problem anymore. Then I loaded MQ up and started EQ over, same problem again. what could be causing this issue for me, as far as I know it's only those two zones with a problem but I've only been to one other higher end zone and that's windsong. didn't have any issues there.

Anyone else having this problem and what can be done to fix it? I'm not even sure it's MQ related but seeing no problem when MQ wasn't loaded then problems right after kinda worries me. I've been having this issue since before last patch, can't figure it out. Also spans video cards, my old car that has died recently was replaced so I know it couldn't have been card related. This is a brand new $300.00 card and it's not changed anything.

Thanks for any help/suggestions.
 
i suggest a FULL reinstall of eq and mq2. Just use a different directory, but don't use any of your old config files for either eq or mq2 to at least try to narrow it down.
 
Re: Blacked out chats/menu's etc. BAD!

Infiniteye said:
I'm having a weird issue here. I zone into City of Bronze or Pillars of Alaris and my chat windows black out once I say something, and this affects my spell bar menu, any text tab on a UI window, etc. I can't do anything. I tried deleting entire zone files then patching and loaded into EQ with no MQ running and there was no problem anymore. Then I loaded MQ up and started EQ over, same problem again. what could be causing this issue for me, as far as I know it's only those two zones with a problem but I've only been to one other higher end zone and that's windsong. didn't have any issues there.

Anyone else having this problem and what can be done to fix it? I'm not even sure it's MQ related but seeing no problem when MQ wasn't loaded then problems right after kinda worries me. I've been having this issue since before last patch, can't figure it out. Also spans video cards, my old car that has died recently was replaced so I know it couldn't have been card related. This is a brand new $300.00 card and it's not changed anything.

Thanks for any help/suggestions.
Click to expand...

Try backing up and then deleting any eqclient.ini, UI_toonname_servernane.ini and Toonname_servername.ini files. These hold many weird and old settings for years sometimes. Deleting them forces EQ to recerate them. Try this before you do a full reinstall.
 
Problem averted, solved my ignorance.

Well I figured it out, my own dumb mistake. I deleted the ini settings files in EQ and still no luck. I noticed that the only time I had an issue was when MQ was loaded. I already installed version C but I installed it in my backup drive instead and ran it from there. It worked and I had a problem deleting it from my desktop because the mq2main.dll wouldn't let me delete it even after closing MQ. After I got it re-installed on the desktop I loaded into EQ and even had my old INI's back in the EQ folder and it is working fine. I usually just unzip, overwrite all/yes. and never had a problem, Guess sometimes you just need to delete the pesky release folder and re-install.

Thanks for the suggestions guys, I am glad I didn't jump the gun and fully re-install EQ.
 
MQ2TributeManager Fixed thanks to sym
File attached in first post.
 
You must log in or register to reply here.
Very Vanilla Compile 20120115c
Next unread thread 🦁

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top
Cart

Cart

Total -