• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver
Scriber

Release Scriber (1 Viewer) 4.2.1

No permission to download
Join us with Level 2 access RedCents
Overview Commands Instructions Updates (39) Reviews (18) History Discussion
I have been working a little alt at 110. This is the error it is giving me. Not sure what is going on?
I ran it a few times and there is a lot of errors and stuff not found but the item is in the Lua folder.

Capture.PNG
 
Loving the changes! One thing I noticed - It will not go to the target in Ethernere. It targets, it tries to open to buy spells, but from the guildhall portal spot, they are all out of reach. Needs a /nav target, moveto, etc.
 
Shadow said:
Loving the changes! One thing I noticed - It will not go to the target in Ethernere. It targets, it tries to open to buy spells, but from the guildhall portal spot, they are all out of reach. Needs a /nav target, moveto, etc.
Click to expand...
You need the map meshes provided in the second post of this discussion thread
 
Not trying to be "spammy". I have the plat, so not that big of a deal, but is there any way to determine what the portal location is already set to? I run this individually on 6 toons, not simultaneously as that caused issues before, but currently I am in the 96-100 range. I run it in Shard's, it buys the missing, gates me back to guild lobby (Bard is bound in same spot as the rest of my toons, but the script says his bind is not compatible), then the 1st toon of the 6 that I run the script on buys a portal stone and sets the portal to Ethernere, buys spells, gates back. The other 5 don't need to buy the portal stone, as 1st already did. Just a slight improvement. Thanks for an amazing script!
 
Shadow said:
Not trying to be "spammy". I have the plat, so not that big of a deal, but is there any way to determine what the portal location is already set to? I run this individually on 6 toons, not simultaneously as that caused issues before, but currently I am in the 96-100 range. I run it in Shard's, it buys the missing, gates me back to guild lobby (Bard is bound in same spot as the rest of my toons, but the script says his bind is not compatible), then the 1st toon of the 6 that I run the script on buys a portal stone and sets the portal to Ethernere, buys spells, gates back. The other 5 don't need to buy the portal stone, as 1st already did. Just a slight improvement. Thanks for an amazing script!
Click to expand...
I've thought about and been trying to look into that as well. I don't think mq has a way to read to where the portal is currently set. I'll ask if there is a way to add that though
 
Shadow said:
Not trying to be "spammy". I have the plat, so not that big of a deal, but is there any way to determine what the portal location is already set to? I run this individually on 6 toons, not simultaneously as that caused issues before, but currently I am in the 96-100 range. I run it in Shard's, it buys the missing, gates me back to guild lobby (Bard is bound in same spot as the rest of my toons, but the script says his bind is not compatible), then the 1st toon of the 6 that I run the script on buys a portal stone and sets the portal to Ethernere, buys spells, gates back. The other 5 don't need to buy the portal stone, as 1st already did. Just a slight improvement. Thanks for an amazing script!
Click to expand...
spoke with the developers, they are working on a way to keep you from buying a stone if the portal is already set to the location you are trying to hit with the portalsetter. so its in development to try and get something to work, just not available yet.
 
Shadow said:
Not trying to be "spammy". I have the plat, so not that big of a deal, but is there any way to determine what the portal location is already set to? I run this individually on 6 toons, not simultaneously as that caused issues before, but currently I am in the 96-100 range. I run it in Shard's, it buys the missing, gates me back to guild lobby (Bard is bound in same spot as the rest of my toons, but the script says his bind is not compatible), then the 1st toon of the 6 that I run the script on buys a portal stone and sets the portal to Ethernere, buys spells, gates back. The other 5 don't need to buy the portal stone, as 1st already did. Just a slight improvement. Thanks for an amazing script!
Click to expand...
Just saw the spot you mentioned the bard issue. It may have loaded slow causing it to get ahead of itself in the Lua. I'll look over it and see if there is anything I can do to help with that issue
 
Kuhle said:
Just saw the spot you mentioned the bard issue. It may have loaded slow causing it to get ahead of itself in the Lua. I'll look over it and see if there is anything I can do to help with that issue
Click to expand...

1647632601254.png

Is it because Crescent Reach is in there, even though I end up in Guild Lobby everytime I gate?
 
Not sure it its me, or if its something that can be improved. But the Scribing Speed takes a good bit to go through each spell. Not complaining by far, just something i was curious about.
 
The UI keeps closing out on me an cant find anything to open it back up. And anytime I try anything like /scriber show or /scriber ui. it just runs starts the buying process
 
yep, lots of problems right now, trying to work through them
Heimdall said:
The UI keeps closing out on me an cant find anything to open it back up. And anytime I try anything like /scriber show or /scriber ui. it just runs starts the buying process
Click to expand...
 
Would you please include an option that scribes only? Or scribes before travelling? I usually 5 levels at once when I buy spells. I cannot be bothered to go back for spells over and over again each ding. I just want to scribe my current level's spells that I bought with Scriber at 106. If I uncheck all zones, won't process. If I uncheck all zones for my level range, but keep PoK checked, won't process. It instead wants to travel immediately.

Thanks!
 
Shadow said:
Would you please include an option that scribes only? Or scribes before travelling? I usually 5 levels at once when I buy spells. I cannot be bothered to go back for spells over and over again each ding. I just want to scribe my current level's spells that I bought with Scriber at 106. If I uncheck all zones, won't process. If I uncheck all zones for my level range, but keep PoK checked, won't process. It instead wants to travel immediately.

Thanks!
Click to expand...
I can do that. No worries. Just give me some time with it
 
Noticed today when running it that the script may be running a bit too fast because it doesn't give the vendor inventory a chance to load before moving on to the next spell vendor. It visited them all in order like it was supposed to, but it didn't purchase anything that I was missing.

Edit: This was only at the PoK vendors, everywhere else so far is purchasing them correctly. Not sure what the difference is other than maybe latency.
 
Last edited:
Ok, I will slow it down
Kuridd said:
Noticed today when running it that the script may be running a bit too fast because it doesn't give the vendor inventory a chance to load before moving on to the next spell vendor. It visited them all in order like it was supposed to, but it didn't purchase anything that I was missing.
Click to expand...
 
Kuridd said:
Noticed today when running it that the script may be running a bit too fast because it doesn't give the vendor inventory a chance to load before moving on to the next spell vendor. It visited them all in order like it was supposed to, but it didn't purchase anything that I was missing.

Edit: This was only at the PoK vendors, everywhere else so far is purchasing them correctly. Not sure what the difference is other than maybe latency.
Click to expand...
As Kuhle says, it's probably lag. The lists on the PoK vendors can be a bit big. I will say I've run the base scribe code against vendors in PoK and didn't have an issue. Do you have specific vendors you're seeing this with?
 
Kuhle updated Scriber with a new update entry:

Stuff

--Fixed the spelling for Maiden's Eye
--added a 2 second delay for pok vendors to allow for time for the vendor to populate (theres a better way to do this, just don't know what it is yet)
--Added the ability to scribe the spells that are already in your inventory without going to vendors
--Sped up scribing of spells.... maybe? Hopefully didn't break it?
Click to expand...

Read the rest of this update entry...
 
rouneq said:
As Kuhle says, it's probably lag. The lists on the PoK vendors can be a bit big. I will say I've run the base scribe code against vendors in PoK and didn't have an issue. Do you have specific vendors you're seeing this with?
Click to expand...
At the time it was the Necro class vendors that were causing an issue.
 
Shadow said:
Crashes in PoK. Literally freezes the entire eqgame.exe instance. Tried twice on 2 toons each. Currently unusable. 8(
Click to expand...
thanks for letting me know. I'll fix it in a few days when I get home. for now, update again and it will revert back to the previous update.
 
Kuhle - Wanted to add for BST/SHM there is one spell obtained from Lceanium called Spirt of Tala'Tak at SHM 74, and BST at 79. Just an FYI.
 
Sifter228 said:
Shm repurchases after memming on next spell run:
Regrowth of dar khurah
Malosini
Click to expand...
That's a new one... Do you have like rank 2 or 3, or is it the base spell you already have? Are you ending scriber before doing a new run or is it just several hours later and scriber was still running? Any extra information would allow me to dig in. It's a issue I've never heard from anyone yet.
 
This is working fantasticly!!! One issue I just discovered on my Berzerkers only. Level 85. I had the tomes in inventory, chose to just mem spells I already own, Berserkers stated no spells to scribe. WAR/SHM/BST/BRD all worked flawlessly to mem inventory spells. Both BER did not. Just wanted to point that out. As for buying, they all bought in POK up to 90 and no issues.
 
I'll play with it and see what I can do.
Shadow said:
This is working fantasticly!!! One issue I just discovered on my Berzerkers only. Level 85. I had the tomes in inventory, chose to just mem spells I already own, Berserkers stated no spells to scribe. WAR/SHM/BST/BRD all worked flawlessly to mem inventory spells. Both BER did not. Just wanted to point that out. As for buying, they all bought in POK up to 90 and no issues.
Click to expand...
 
Just used this on my rogue starting with level 96+ and it would go to one zone, gate back and just sit there. Once restarted, I bumped it up to the next level group (101, 106, etc) each time and it was the same. One zone then stop once back in pok. No matter what I tried, it refused to go to cobalt scar, the one place I was most hoping it would work, of course :)
 
You must log in or register to reply here.
Release Scriber
Next unread thread 🦁

Users who are viewing this thread

  • W
Total: 2 (members: 1, guests: 1)
Back
Top
Cart

Cart

Total -