• You've discovered RedGuides, an EverQuest multi-boxing and scripting community 🧙‍♀️⚙️. We want you to play several EQ characters at once, come join us and say hello! 👋

  • A TLP without truebox has thawed (Very Vanilla ready)
    Frostreaver

Problem - Puller role help

entropicgolem

New member
Joined
Apr 24, 2018
RedCents
I notice when my bard pulls a lot of the time he will declare a pull run out turn around and return to camp without doing anything. Have been tinkering with the INI but I am stuck. Any suggestions would be great. Including INI entry below:

PullWith=Boastful Bellow
PullMeleeStick=1
MaxRadius=800
MaxZRange=1000
UseWayPointZ=0
PullWait=5
PullRadiusToUse=90
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
PullLevel=0|0

Thanks!
 
Usually that means the mob inside MaxRadius as a circle, but the pull path was longer than MaxRadius. If the puller senses it's running too long it turns back.

Are the mobs walking away from the puller? Sometimes if the mobs are mobile, the mob will either walk just out of pull range or behind an obstacle. KA/MQ2Nav will sometimes chase the mob abit, but other times it just assumes there is an unknown LoS issue or the mob is an un-pullable quest mob or such.

Setting wise, this is a big Z axis MaxZRange=1000. I try to keep it in 200-300 range outdoors, and 100 or less in dungeons.
 
Thank you for the response and assistance. Will log in later to fiddle with the settings some more.

Camp settings:
KissAssistVer=10.2.6
Role=Puller
CampRadius=40
CampRadiusExceed=4000

I do in fact notice this more often when the mobs are moving and at the further end of the max distance I set up with pulling.

-EG
 
Thanks for the heads up, surfdog! Retooled it a bit and went range weapon on warrior instead. I think I was a little ambitious on the limits I set previously in Brother's Island. Pretty hilly and I noticed that it seemed as though when the puller did go full idiot, it was on wandering mobs. New setup that seems to be working:

PullWith=Fieldsplitter Shortbow|Summoned: Arrow of Marr
MaxRadius=200
MaxZRange=85
PullWait=0
PullRoleToggle=0
ChainPull=0
ChainPullHP=90
ChainPullPause=30|2
PullMeleeStick=0
UseWayPointZ=0
PullRadiusToUse=90
PullPause=30|2
PullLevel=0|0

Don't trash the bow - It was all that I had on me at the moment =p. Hopefully someone sees this thread and finds it as helpful to them as it was to me. Thanks again, everyone!

- EG
 
Problem - Puller role help

Users who are viewing this thread

Back
Top
Cart